|
|
|
burns but only 80% of the disc...
|
|
|
Feud
Newbie
|
3. May 2005 @ 15:54 |
Link to this message
|
|
So I'm backing up using shrink to rip and nero to burn. Both latest versions. Nero completes the burn, I hit "okay" then "done" and out pops the disc. examining the disc I notice the outer ring (less than a half inch) hasn't been burned on. I threw the disc into a dvd player and sure enough it freezes towards the end.
So I tried using my second burner. Got the same results.
I recently installed empire earth 2 so I uninstalled and tried again. Same result.
I did a system restore to a time before when things were working fine. Same result.
At first I was thinking that I wore my drive out but the same thing is happeneing on both drives.
Any Ideas???
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer INTEL_
System Model D865PERL
System Type X86-based PC
Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2793 Mhz
Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2793 Mhz
BIOS Version/Date Intel Corp. RL86510A.86A.0078.P17.0405301738, 5/30/2004
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Time Zone Pacific Daylight Time
Total Physical Memory 1,024.00 MB
Available Physical Memory 701.69 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 2.40 GB
Page File C:\pagefile.sys
conflicts/sharing
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF Intel(R) 82865G\PE\P Processor to AGP Controller - 2571
I/O Port 0x000003C0-0x000003DF RADEON 9800 PRO
IRQ 16 RADEON 9800 PRO
IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24D2
IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24DE
IRQ 17 OHCI Compliant IEEE 1394 Host Controller
IRQ 17 Intel(R) ICH5/ICH5-M SMBus Controller - 24D3 (Intel(R) SMBus 2.0 Driver)
IRQ 17 SoundMAX Integrated Digital Audio
IRQ 18 Intel(R) 82801EB USB Universal Host Controller - 24D7
IRQ 18 Intel(R) 82801EB Ultra ATA Storage Controllers
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF Intel(R) 82865G\PE\P Processor to AGP Controller - 2571
Memory Address 0xA0000-0xBFFFF RADEON 9800 PRO
I/O Port 0x000003B0-0x000003BB Intel(R) 82865G\PE\P Processor to AGP Controller - 2571
I/O Port 0x000003B0-0x000003BB RADEON 9800 PRO
Components / Multimedia
Drive D:
Description CD-ROM Drive
Media Loaded No
Media Type CD-ROM
Name SONY DVD RW DRU-530A
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate Not Available
SCSI Target ID 0
PNP Device ID IDE\CDROMSONY_DVD_RW_DRU-530A____________________2.1C____\5&4D9CFF&C&0.0.0
Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/23/2001 5:00 AM)
Drive E:
Description CD-ROM Drive
Media Loaded No
Media Type CD-ROM
Name LITE-ON DVDRW LDW-811S
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate Not Available
SCSI Target ID 1
PNP Device ID IDE\CDROMLITE-ON_DVDRW_LDW-811S__________________HS0E____\5&4D9CFF&C&0.1.0
Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/23/2001 5:00 AM)
|
|
Advertisement
|
 |
|
|
|
Feud
Newbie
|
3. May 2005 @ 16:25 |
Link to this message
|
Oh and using Nero Burning Rom
|
|
Hallywood
Member
|
3. May 2005 @ 17:38 |
Link to this message
|
|
When the burn is done Shrink will or should automatically eject the disc. You shouldn't have to touch anything until the disc is ejected.
HW.
|
|
Feud
Newbie
|
3. May 2005 @ 18:43 |
Link to this message
|
|
I don't have it set up that way. That's an option.
|
|
Feud
Newbie
|
3. May 2005 @ 19:29 |
Link to this message
|
|
Just uninstalled completely, defragged, reinstalled and still getting same results.
|
|
squizzle
AfterDawn Addict
|
3. May 2005 @ 19:31 |
Link to this message
|
|
have you tried different media? What brand of media are you using?
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html
My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
|
|
Feud
Newbie
|
3. May 2005 @ 19:44 |
Link to this message
|
|
Sony discs. Never had trouble before. That is not the problem.
|
|
Feud
Newbie
|
4. May 2005 @ 05:07 |
Link to this message
|
uninstalled Nero 6 ultra - installed Nero 5. Same result.
|
|
Feud
Newbie
|
4. May 2005 @ 05:40 |
Link to this message
|
|
Log File
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0E - HA 3 TA 1 - 6.6.0.12
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1c - HA 3 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-530A D: CDRom0
LITE-ON DVDRW LDW-811S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047192kB)
Free physical memory: 656MB (672288kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.5.2005
UDF/ISO compilation
6:17:57 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:17:58 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
6:17:58 AM #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:17:58 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:17:58 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:17:58 AM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-811S running
6:17:58 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
6:17:58 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
6:17:58 AM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
6:17:58 AM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
6:17:58 AM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
6:17:58 AM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW LDW-811S, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
6:17:58 AM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:17:58 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [LITE-ON DVDRW LDW-811S]
--------------------------------------------------------------
6:17:58 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW LDW-811S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00
6:17:58 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:17:58 AM #17 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.
6:17:58 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:17:58 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
6:17:59 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:17:59 AM #21 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode
6:17:59 AM #22 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
6:17:59 AM #23 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes
6:17:59 AM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:18:06 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
06:18:06.734 - LITE-ON DVDRW LDW-811S\H3 T1 : Queue again later
6:32:39 AM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW LDW-811S > start writing Lead-Out at LBA 2286096 (22E210h), lenght 0 blocks
6:32:39 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:32:39 AM #28 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 2286095
6:33:01 AM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
squizzle
AfterDawn Addict
|
4. May 2005 @ 06:25 |
Link to this message
|
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Looks like your burner doesn't like your media. A firmware update might help. I have the same burner and my firmware is HSOR, can be found here: http://codeguys.rpc1.org/firmwares.html
Convert PAL to NTSC or NTSC to PAL------>http://forums.afterdawn.com/thread_view.cfm/167922
ScubaPete's guides------>http://www.dvdplusvideo.com/tutorial007.html
Bbmayo's guides------>http://home.comcast.net/~bbmayo/index.html
My ever-growing movie collection------>http://www.intervocative.com/dvdcollection.aspx/squizzle
|
|
davewood
Suspended due to non-functional email address
|
4. May 2005 @ 06:28 |
Link to this message
|
Just passing thought i would add my comment.. locking up at the back end its all down to media and speed.. sony disks are crap ive been doing dvds since they started coming out on Rs 1999 and if you burn too fast and your burn proof kicks in which some dvd players dont like then you will hit trouble, i always burn at x6 speed on x8 speed disks and never have a problem and i always use fuji dye disks there the best.. forget about ritek they are totally over rated unless you use pink aritas but you never know if its a true ritek now a days with all the 3rd Part companies any way just though i would add my comment hope you have sucess in what you do. try intervideo to rip your dvds its very fast and can do direct from your original dvd disk with AnyDVD running in the backround
|
|
Feud
Newbie
|
4. May 2005 @ 11:23 |
Link to this message
|
|
not sure how to apply firmware upgrade - I don't have 3.5 drive.
|
|
Feud
Newbie
|
4. May 2005 @ 11:37 |
Link to this message
|
|
nm - it was an .exe e/smacks head
|
|
Feud
Newbie
|
4. May 2005 @ 13:44 |
Link to this message
|
|
did firmware update - still getting same results
|
AfterDawn Addict
|
4. May 2005 @ 13:58 |
Link to this message
|
Please try some different media.
Quote:
Sony discs. Never had trouble before. That is not the problem.
I have had problems with Sony DVDs and would not be suprised if this is the problem. At least try some DVD-RW media so we can all try and figure out if the problem is media related.....You know, the process of elimination.
|
|
Feud
Newbie
|
4. May 2005 @ 14:22 |
Link to this message
|
|
I just tried burning on the sony drive and it failed "power calibration"
Here's the log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
Recorder: <SONY DVD RW DRU-530A> Version: 2.1c - HA 3 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1c - HA 3 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-530A D: CDRom0
LITE-ON DVDRW LDW-811S E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047192kB)
Free physical memory: 644MB (659888kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.5.2005
UDF/ISO compilation
3:02:32 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
3:02:32 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
3:02:32 PM #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:02:32 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
3:02:32 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
3:02:32 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-530A running
3:02:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
3:02:32 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
3:02:32 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
3:02:33 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
3:02:33 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
3:02:33 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-530A, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
3:02:33 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:02:33 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [SONY DVD RW DRU-530A]
--------------------------------------------------------------
3:02:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00
3:02:33 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
3:02:33 PM #17 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.
3:02:33 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
3:02:33 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
3:02:33 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:02:33 PM #21 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode
3:02:33 PM #22 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Power-Burn -> ON
3:02:33 PM #23 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes
3:02:33 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:03:36 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x044A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
3:03:36 PM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error
3:03:36 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:03:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:03:36 PM #29 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 31
3:03:36 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I'm going to remove the sony drive. It's on the same chain as the lite on.
|
|
Feud
Newbie
|
4. May 2005 @ 15:14 |
Link to this message
|
|
Okay unplugged the sony and successfully burned on the lite on. Burning a second right now to be sure. Looks like the Sony was the problem. Just a side note - my power supply is a Antec tru 380 which, if you see my system specs above, should be plenty to power all the components right?
|
|
Feud
Newbie
|
4. May 2005 @ 16:16 |
Link to this message
|
|
Burned the second successfully. It was not the media as I had stated before but I understand "the process of elimination".
Thank you for everyones suggestions.
|
|
Advertisement
|
|
|
|
davewood
Suspended due to non-functional email address
|
4. May 2005 @ 23:10 |
Link to this message
|
Just a closing not for your future reference, a power calibration error on Nero basically means your dvd writer failed to initialise, which means you have exceded the life of your dvd writer you can in some cases slow the burn speed down to x2 and carry on writing for another 2 months, or in some cases the drive wont work at all, but in my experience of using Nero (6years) and numerous drives, this is what power calibration means.
|
|
