This message has been edited since posting. Last time this message was edited on 11. May 2005 @ 13:06

If u just got u're xenium, u're OS should be fine but if u want to update it, here is apost from another thread here.
To update the Xenium OS you need to download XeniumOS 2.3 and find the recovery.bin file and Ftp that to Xbox's E drive. After you do that, you must have the E folder open to where you can see the recovery.bin file(leave FlashFXP open) then hit the power button on the Xbox and restart it back to Xenium OS. Now, at the XeniumOS menu select recovery and wait till the OS updates....when the update is complete the Xbox will shutdown on it's own and you should see XeniumOS 2.3.0 when you restart.

Bios to flash Xenium:(you can use your preffered bios)what i'm using is:

Evox M8_16LBA for Xbox 1.6 version and higher.
Evox M8 for Xbox lower than 1.6

My step by step guide:
BURNING CDRW TO FLASH THE BIOS
08.) There has been hundreds of posts on hundreds of forums of how people just cant get the Xenium to read the cdrw so they can flash the bios. If done properly it can be the easiest part of the whole modchip install. Find a type of media that your xbox will read, just burn some music on one @ a slow speed and if the xbox will read it to copy the music then you are good to go. Open up Nero and choose "CD-ROM (ISO)" then click on "new".

09.) Now I would find your bios which you are going to flash your chip with and rename it on your hard drive to "bios.bin" without the "" make sure its not named bios.bin.bin if it doesnt show the file type if while looking at the file all you see is "evoxM7" (for example) then right click and rename to BIOS leave the ".bin" off because windows knows its a ".bin " file. WHEW!! ok now that your bios that u are using is renamed to BIOS and not evoxM7 or something else we want to drag it over to the our ISO, .

10.) Ready to burn your bios CDRW? ok first lets make settings changes then we will be all set. Click the burn icon (little match stick icon) in nero like you are going to burn the cd the burn compliation dialog pops up here we will make a few changes that will ensure the xbox reads the cdrw. First on the "ISO" tab there is a drop down box beside "Format" change this to "Mode1". Secondly on that same tab uncheck "Joliet". Now on the "Burn" tab change "Write Method" to "Disc-At-Once/96" and change the write speed to 4X. It is good practice to burn your cds slow this allows the cdrom to read the cds better.

By now, you should have: a modified XBOX with a working Xenium ICE modchip, installed the retail BIOS and an additional BIOS, set up the Xenium FTP server, set up the XBOX/PC network connection, installed FlashFXP (or some other FTP client) on your PC, successfully connected to your XBOX, backed up your EEprom to the Xenium, and backed up your hard drive.

Right now, you need to get a copy of Evolution-X Dashboard-Build 3935, if you don?t already have it. Again, do not confuse this with Evolution-X BIOS. Team Evolution-X makes both software products, but they are different from each other. You want the dashboard files. Extract the dashboard archive to a folder on your PC. We have to do a couple of things to it before we can send it over to the XBOX.

Ok. In the folder where you extracted the archive, locate the file evox.ini. On some Windows PCs you will only see ?evox? by the notepad-with-gear icon and ?Configuration settings? written below it. The file has a file size of about 4KB.

Open this file in a text editor. On Windows PCs, just double-click the icon and the file should be opened in the default text editor (usually Notepad). You can also open the file in a word processing program, but you must be very careful that when you save the file, that you save it in plain text format and that the file name and extension don?t get changed.

Move down through the file until you come to the line [Network]. Below this line are the network settings Evolution-X will use with its built-in network services. You should have the following lines:


[Network]
SetupNetwork = Yes
StaticIP = Yes
Ip = <your XBOX IP address>
Subnetmask = 255.255.255.0
Defaultgateway = <your PC IP address>
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0
SetupDelay = 0
SkipIfNoLink = No

Edit these settings to reflect the same data that you put into the Xenium OS Network Settings menu.

Save the changes you have made and exit the text editor.
Now we can transfer the dashboard files to the XBOX. Make sure the XBOX is turned on and sitting at the Xenium OS menu. It doesn?t matter which screen the Xenium OS is displaying, just as long as it is on an XOS screen. This is so that we can be sure the Xenium OS FTP service is running.

Start FlashFXP on your PC. Click the lightning bolt icon over the right pane, select XBOX from the list. This will automatically connect with the XBOX. If you can not connect, and you are using DHCP, then you may have to change the IP address in Site Manager since the DHCP server may have assigned a new one to the XBOX.

Once FlashFXP has connected to the XBOX and you see the XBOX folders in the right pane, double-click the XBOX?s C folder to open it. This is where we will be putting the Evolution-X dashboard files.

Now, in the left pane, navigate to the folder on the PC containing the Evolution-X files. You want to transfer two files to the XBOX. Evox.ini and evoxdash.xbe. Once these files have transferred (it goes pretty quickly) that?s all there is to it! If you also have the Skins folder on your PC, you can drag that over as well, but it is not necessary for dashboard operation.

At this point, you can go over to the Xenium OS, go to the Launch Menu, and select any BIOS other than the original (retail kernel). Confirm that you want to launch it, and if everything went right, you should see the Evolution-X dashboard appear on your TV screen.
to your PC.

This message has been edited since posting. Last time this message was edited on 11. May 2005 @ 15:51

This message has been edited since posting. Last time this message was edited on 12. May 2005 @ 12:07

Quote:

---

M8_LBA_IGR_Q-06.bin or M8_LBA_IGR_C-06.

---

I haven't updated my bios in a while so I am not too sure about those 2 unless they r updates of the one im using which is Evox M8_16LBA(lba) so it will recognized a drive bigger than 130 gig.Correct. those recovery bin files are on your e drive just incase you messed up installing a new bios.Find the"apps" folder on your Xbox(usually the F: drive) and ftp your dvd2xbox folder into the apps folder.On your new dash, you will see the Applications menu and you will find dvd2xbox there which u can use to install the games from your disc to your hard drive.

This message has been edited since posting. Last time this message was edited on 12. May 2005 @ 12:21

This message has been edited since posting. Last time this message was edited on 12. May 2005 @ 17:42