|
Okay, I hope I don't get banned for this, I've searched all over for an answer and couldn't find anything, and although these forums seem mainly concerned with copying movies, so do all the others I could find so here's as good a bet as any...
Right, I'm using an NEC ND-6500A dvd+/-RW internal drive which came with my Dell laptop; I've copied several movies to single-layer DVDs already without any problems, using combinations of DVD Decrypter, DVD Shrink, Nero 6.6.0.12 and Sonic RecordNow! 7.3. However, recently I tried backing up my music folders to a dual layer DVD instead. I used a Traxdata DVD+R9 and tried it with RecordNow, in which everything would work fine until it was actually supposed to start burning, at which point it would just stop.
I've also tried burning a movie to a different Traxdata DVD+R9, this time with Nero, but from Nero I just get the message that it's successfully generated high compatibility borders, and then it just stops with the words "burn process failed at 2.4x".
Now, I've checked the NEC website and my drive should be able to burn dual layer discs. I really have no idea where the problem lies. Have Nero and RecordNow made both discs unusable? Did they even do anything at all to the discs? Is there something very basic I'm forgetting to do? The only explanation I've thought of is that it could be related to the fact that I flashed my drive with unofficial region free firmware...and if that's the problem, it'd be nice if someone could tell me whether I really am screwed, and if not, what to do about it.
Thanks,
Nick
This message has been edited since posting. Last time this message was edited on 15. May 2005 @ 18:19
|
|
Yep, I've still got the log from the movie I tried to burn, here it is:
(also, I realised from reading the log just now that the firmware I was using at the time was actually still the original firmware)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c
Recorder: <_NEC DVD+-RW ND-6500A> Version: 202C - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 202C - HA 1 TA 0 - 6.6.0.12
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS548060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 186MB (191476kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.4.2005
UDF/ISO compilation
19:35:51 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
19:35:51 #2 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.IFO has been modified
19:35:51 #3 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.BUP has been modified
19:35:51 #4 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
19:35:51 #5 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
19:35:51 #6 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
19:35:51 #7 Text 0 File Reader.cpp, Line 127
Reader running
19:35:51 #8 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+-RW ND-6500A running
19:35:51 #9 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:35:51 #10 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
19:35:51 #11 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
19:35:51 #12 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3318639 (737:28.39, 6481MB)
19:35:51 #13 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
19:35:51 #14 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD+R9 Double Layer
19:35:51 #15 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:35:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3318640 (3318640) = #3318640/737:28.40
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3318640 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
19:35:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6796574720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3318640 | lead-out | 1 | 0x41 | 0x00
19:35:51 #18 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:35:51 #19 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.
19:35:51 #20 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:35:51 #21 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
19:35:51 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:35:52 #23 Text 0 File DVDPlusDualLayer.cpp, Line 519
L0 Data Zone Capacity set to 1659456 (195240h, 3241MB) -> OK, confirmed setting
19:35:52 #24 CDR -1205 File DVDPlusDualLayer.cpp, Line 544
Burning Layer 1
19:35:52 #25 Text 0 File DVDPlusDualLayer.cpp, Line 552
Start writing layer 1 at address 0 (0h)
19:35:52 #26 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038E5600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
19:35:52 #27 Text 0 File DVDPlusRW.cpp, Line 648
Start write address at LBA 0
DVD high compatibility mode: Yes
19:35:55 #28 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x040E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:35:55 #29 CDR -1046 File Writer.cpp, Line 311
Illegal disc
19:35:55 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:35:55 #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
19:35:55 #32 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:35:55 #33 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:35:55 #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
19:35:55 #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
19:35:55 #36 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 16:07:32
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 09:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 04:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 00:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 16. May 2005 @ 01:22
|
