|
|
|
Plese help me with Nero burning problem....
|
|
|
swayzie
Newbie
|
16. May 2005 @ 11:08 |
Link to this message
|
|
I have an hp 640i lightscribe burner and it should be able to record up to 16x with dvds but it is barely getting to 4x...when I speed test it with nero it fails half the time when it gets near to the end....I am using Maxell 8x media to burn..I finally got it to burn on 8x with a film but it took 18 minutes to burn from a file..and the finalizing itself took over 3 min..the used read buffer goes to 0 then takes forever to get back to 100 to coninue the process..any help would be appreciated...
This message has been edited since posting. Last time this message was edited on 16. May 2005 @ 11:27
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
16. May 2005 @ 11:33 |
Link to this message
|
Could you post your Nero log file, it would be helpful.
|
|
swayzie
Newbie
|
16. May 2005 @ 11:33 |
Link to this message
|
|
how do I do that?thanks....
|
AfterDawn Addict
|
16. May 2005 @ 11:35 |
Link to this message
|
|
Try a copy and paste into your reply.
|
|
swayzie
Newbie
|
16. May 2005 @ 11:38 |
Link to this message
|
|
I mean how do I get to the log file to copy and paste it..
|
AfterDawn Addict
|
16. May 2005 @ 11:57 |
Link to this message
|
|
If you did not save your last burn log file, you will have to do it again, and then save the log and post it, need to see your errors.
|
|
swayzie
Newbie
|
16. May 2005 @ 11:59 |
Link to this message
|
|
ok..let me do another one..
|
|
swayzie
Newbie
|
16. May 2005 @ 12:03 |
Link to this message
|
|
do I have to trya and burn something to get the log or can I log the speedtest?
|
|
swayzie
Newbie
|
16. May 2005 @ 13:03 |
Link to this message
|
|
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <HP DVD Writer 640c> Version: ES04 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MITSUMI CD-ROM FX48++W atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 640c E: CDRom0
MITSUMI CD-ROM FX48++W F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458092kB)
Free physical memory: 204MB (209048kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2005
NeroAPI
2:42:07 PM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:42:07 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
2:42:07 PM #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running
2:42:07 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:42:07 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:42:08 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:42:08 PM #7 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
2:42:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
2:42:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
2:42:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HP DVD Writer 640c, Media type: DVD+R
2:42:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
2:42:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 640c]
--------------------------------------------------------------
2:42:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
2:42:43 PM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:42:43 PM #15 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
2:42:43 PM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:42:43 PM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
2:42:43 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:42:43 PM #19 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08EA0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
2:42:43 PM #20 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
2:52:22 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00E00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0D 0x2A 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
2:52:22 PM #22 CDR -1135 File Writer.cpp, Line 311
Write error
2:52:22 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:52:22 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:52:49 PM #25 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
2:52:49 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:52:49 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 4/6/2005 12:42:41 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
swayzie
Newbie
|
16. May 2005 @ 13:15 |
Link to this message
|
|
here is another one
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.13
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HP DVD Writer 640c >Version: ES04 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MITSUMI CD-ROM FX48++W atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 640c E: CDRom0
MITSUMI CD-ROM FX48++W F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458092kB)
Free physical memory: 318MB (326320kB)
Memory in use : 28
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2005
DVD-Copy over Image
2:08:41 PM #1 SCSI -1128 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07971000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0xE2 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x11 0x00
2:08:41 PM #2 Text 0 File DriveFileSystemBlockReader.cpp, Line 235
Error during reading the sector: 2286080
2:08:42 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
2:08:42 PM #4 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
2:08:42 PM #5 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
2:08:42 PM #6 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2:08:42 PM #7 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
2:08:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
2:08:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
2:08:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
2:08:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:08:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [Image Recorder]
--------------------------------------------------------------
2:08:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
2:08:43 PM #14 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
2:08:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:26:30 PM #16 SCSI -1128 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07C71000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0xE2 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x11 0x00
2:26:31 PM #17 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
2:26:31 PM #18 Text 0 File Reader.cpp, Line 385
Exception value: -1128
2:26:31 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:26:32 PM #20 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 4/6/2005 12:42:41 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <HP DVD Writer 640c> Version: ES04 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MITSUMI CD-ROM FX48++W atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 640c E: CDRom0
MITSUMI CD-ROM FX48++W F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458092kB)
Free physical memory: 203MB (208116kB)
Memory in use : 54
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2005
NeroAPI
2:42:07 PM #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:42:07 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
2:42:07 PM #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running
2:42:07 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:42:07 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:42:08 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:42:08 PM #7 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
2:42:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
2:42:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
2:42:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HP DVD Writer 640c, Media type: DVD+R
2:42:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
2:42:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 640c]
--------------------------------------------------------------
2:42:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
2:42:43 PM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:42:43 PM #15 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
2:42:43 PM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:42:43 PM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
2:42:43 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:42:43 PM #19 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08EA0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
2:42:43 PM #20 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
2:52:22 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00E00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0D 0x2A 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
2:52:22 PM #22 CDR -1135 File Writer.cpp, Line 311
Write error
2:52:22 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:52:22 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:52:49 PM #25 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
2:52:49 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:52:49 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 4/6/2005 12:42:41 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 17. May 2005 @ 18:43
|
|
swayzie
Newbie
|
16. May 2005 @ 15:13 |
Link to this message
|
|
arniebear where are you?? what do you think?
|
Moderator
|
17. May 2005 @ 16:39 |
Link to this message
|
|
Remove InCD4
|
Moderator
|
17. May 2005 @ 16:42 |
Link to this message
|
|
also read the forum rules.
Forum rule #2. Consider an appropriate forum before posting your question -- look at the forum descriptions on the main forum page first.
Forum rule #3. Post your question only once! Don't cross-post your questions to multiple forums!
|
|
swayzie
Newbie
|
17. May 2005 @ 18:36 |
Link to this message
|
|
ok thanks...sorry bout that im a newbie ..I thought this was the right forum for this...ill try and remove the id id4
|
|
LivnDGirl
Member
|
17. May 2005 @ 18:40 |
Link to this message
|
|
edit out your serial numbers too on those last logs.
****************************************************
I mpeg, therefore I am.
****************************************************
Settle in with the beverage of your choice and ...
Read this first, before you ask for help
http://forums.afterdawn.com/thread_view.cfm/183136
The third tab above "Guides" will answer most of the rest. |
|
swayzie
Newbie
|
17. May 2005 @ 18:43 |
Link to this message
|
|
I missed that....thanks..
|
AfterDawn Addict
|
18. May 2005 @ 03:01 |
Link to this message
|
|
Sorry Swayzie I could not get back with you but I got bogged down with work. Try removing InCD as Flip suggested. I have this exact same drive and it is running with no problems, the only thing that is different is that I have it set up as slave instead of master. Am not sure what you are trying to burn, but if it is a movie try ripping with DVD Decrypter or DVD Shrink and burning with DVD Decrypter instead of Nero to see if it is the drive or the Nero program. You could also try another brand of media, although I have had no problems with Maxell but I use -R disks.
This message has been edited since posting. Last time this message was edited on 18. May 2005 @ 03:20
|
Senior Member
|
18. May 2005 @ 04:26 |
Link to this message
|
|
Another thing you may want to consider; Note this on your log:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
Set Target size down to about 4350MB for single layer disks; this will keep you away from the outer rim of disc to avoid write errors....
|
|
swayzie
Newbie
|
18. May 2005 @ 07:48 |
Link to this message
|
|
^^thanks, how do I set the target size??
|
|
swayzie
Newbie
|
18. May 2005 @ 07:49 |
Link to this message
|
|
so It doesnt matter if I use -r or +r discs Arnieber?
|
AfterDawn Addict
|
18. May 2005 @ 09:37 |
Link to this message
|
I only use -R because it is more compatible with all my standalones, I have one that will not play +R. Here is a Nero log file from my 640c, maybe you can compare it to yours.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HP DVD Writer 640c> Version: ES04 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-167T >Version: 9S1B - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3200822A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-00DEA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-167T E: CDRom0
HP DVD Writer 640c F: CDRom1
_NEC DVD_RW ND-1300A H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 635MB (650696kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.5.2005
UDF/ISO compilation
10:25:18 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
10:25:18 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
10:25:18 PM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:25:18 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
10:25:18 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
10:25:18 PM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running
10:25:18 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:25:18 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:25:18 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
10:26:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2166927 (481:32.27, 4232MB)
10:26:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
10:26:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HP DVD Writer 640c, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193
10:26:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:26:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2166928 (2166928) = #2166928/481:32.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2166928 blocks [HP DVD Writer 640c]
--------------------------------------------------------------
10:26:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4437868544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2166928 | lead-out | 1 | 0x41 | 0x00
10:26:56 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:26:56 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
10:26:56 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:26:56 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
10:26:56 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:26:57 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
10:26:57 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
10:26:57 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
10:26:57 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:34:34 PM #25 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 640c > start writing Lead-Out at LBA 2166928 (211090h), lenght 0 blocks
10:34:34 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:34:35 PM #27 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 2166927
10:35:03 PM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 4/17/2005 9:07:05 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 5/24/2004 2:57:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 5/24/2004 2:57:52 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 5/24/2004 2:59:24 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 2:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
As you can see I do have InCD on my system but it has never conflicted with my burning, however some people do have problems with it. If it is ripping and burning a movie you are trying to do try using another program to insure it is not the drive. You can also try another brand of media.
|
|
Advertisement
|
|
|
Senior Member
|
18. May 2005 @ 09:56 |
Link to this message
|
|
Target size is set in the encoding software: In Shrink, you will find it in File then Preferences then Preferences (again) and set target size to custom which should be between 4300-4360. In Nero, open up Nero Recode 2 and you will see block "fit to target", again use custom to resize to somewhere between 4300-4360.
The HP 640I series is a +/- burner, so it doesn't matter which format disks you use. Make sure you have the latest firmware for your HP burner. Maxell's are excellent disks in either the + or - format. However, in your Nero History post, I can't find where you media is listed except as "unknown". Try another quality brand media.
Remove InCD, lower target size and try again. If not successful, repost the Nero history again.
This message has been edited since posting. Last time this message was edited on 18. May 2005 @ 09:59
|
|
