|
I think i erased something important.
|
|
|
Zarkoph
Newbie
|
2. June 2005 @ 20:33 |
Link to this message
|
|
Ok I bought an xbox with xecuter2 from ebay. I have learned how to burn games and change skins. ha. other than that this thing is new to me. Just a few moments ago I was looking at the bios and I was asked if I wanted to flash it. I clicked Y and the next thing I see is "ERASING" i FREAKED OUT AND powered the xbox off. Now when I try to turn it on, I just get a blank screen. Please someone help. I hope I didn't erase the whole thing.
-Z-
|
|
Advertisement
|
 |
|
|
|
mdsup
Suspended due to non-functional email address
|
2. June 2005 @ 20:38 |
Link to this message
|
|
try switch to the other bank using the external dipswitch and see what happens...if you still get nothing you will need to buy a programmer to flash a bios to your chip...if you do have to buy a programmer, make sure you use the correct bios for the version xbox you have.
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
|
Zarkoph
Newbie
|
2. June 2005 @ 20:42 |
Link to this message
|
|
I don't see any switches on the xbox. Is this something that is inside the xbox. I did write down the bioses that were in my xbox. What does it mean to flash a bios? I had 4 of them listed.
-Z- Thank for your reply.
|
Senior Member
|
2. June 2005 @ 20:46 |
Link to this message
|
|
Hopefully he's talking about the chip being an xecuter2 and not that the onboard tsop has been flashed with the xecuter2 bios.
|
|
Zarkoph
Newbie
|
2. June 2005 @ 20:49 |
Link to this message
|
|
My xbox was working fine until I had to mess with it. I went to the bios list and clicked A on one of them, and then Y to flash it. Which I have no clue what that means. And then I shut the system down as soon as i saw it erasing itself. That didn't seem to help.
|
|
mdsup
Suspended due to non-functional email address
|
2. June 2005 @ 21:01 |
Link to this message
|
|
yeah i didn't read carefull enough...
does your xbox have a chip in it?
just so you know for the future, if you don't know what something does, DO NOT TOUCH IT
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:04 |
Link to this message
|
|
I assume it does. When i got it from ebay a note said all the games were on the hd. I have since added several. and there are thousands of games from super nintendo to atari. I know I shouldn't have touched it. I hate not understanding how something works and tend to get myself into situations like these. But in the end I learn something.
|
|
mdsup
Suspended due to non-functional email address
|
2. June 2005 @ 21:15 |
Link to this message
|
|
if you want help you need to let us know if you have a chip or if your xbox is modded some other way...so open up your xbox and look underneathe the dvd drive and see if there is a chip there.
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:20 |
Link to this message
|
|
ok im opening it up now
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:32 |
Link to this message
|
|
ok i got the 4 screws off now whats the trick?
|
|
mdsup
Suspended due to non-functional email address
|
2. June 2005 @ 21:35 |
Link to this message
|
|
there is 6 screws on the bottom, 1 under each rubber foot, and 2 underneathe the stickers...then you will need a smaller torx screwdriver for 3 inside the xbox that hold the trays down.
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
This message has been edited since posting. Last time this message was edited on 2. June 2005 @ 21:36
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:38 |
Link to this message
|
|
there are after market stickers over the originals that say
warning do not remove
warrant void if seal is broken
expires 12-15-05
wecuter mod 160gb
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:46 |
Link to this message
|
|
ok i got it open i see a western digital drive and the dvd drive. which two screws are next?
|
|
mdsup
Suspended due to non-functional email address
|
2. June 2005 @ 21:51 |
Link to this message
|
|
there are 3 screws that hold down the trays...take them out and both trays should lift out, make sure you don't pull too hard and ruin the power wires, or the ide cable.
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:56 |
Link to this message
|
|
ok i got the dvd tray out but the hd seems to be connected to the base with wires . can i see what i need now that i got the dvd out?
|
|
mdsup
Suspended due to non-functional email address
|
2. June 2005 @ 21:58 |
Link to this message
|
|
if your xbox has a modchip it will be sitting right below the dvd drive.
do you have msn messenger, if you do send me a pm with your screen name, cuz this reply forum shit sucks.
1.6 xbox
x3
dual hd's
seagate 300gig hd
seagate 100gig notebook hd
lots of led's
Halo2 LE(the blue case)
1.4
x3/x3 control panel/x3 lcd
400gig seagate
blue/green eject light
white controller port lights
|
|
Zarkoph
Newbie
|
2. June 2005 @ 21:59 |
Link to this message
|
|
beep beep
This message has been edited since posting. Last time this message was edited on 3. June 2005 @ 07:14
|
|
Advertisement
|
|
|
Senior Member
|
3. June 2005 @ 01:20 |
Link to this message
|
|
I'll say one thing here,edit your post now and take your email addy off it. It's against the rules to post email addresses in the forum. Next time PM the person and send him/her/it the email address that way. It's to prevent you from gatting crazy amounts of spam.
|
