|
|
|
Nero Burning Problems, Write Error at 99%
|
|
|
trybenut
Junior Member
|
8. June 2005 @ 11:35 |
Link to this message
|
|
Out of the blue I started getting this error. Never had a problem before. Decrypt an Shrink worked great. DVD Shrink and DVD Decrypter error out also. I use Ritek G04 media, also never been a problem. I tried updating to Nero 6.6.0.13 thinking that would fix it, but it didn't. I've been looking for an update to my firmware, but I think I have the latest version. I have a Toshiba sd-r6112 in a laptop. I have firmware version 1031 right now and thats the highest I can find. Anyone know of anything different? I've check the DMA. Thats on. Uninstalled Alcohol 120%, uninstalled nero, used their clean tool and reinstalled Nero attempted to burn at ver 6, 6.6.0.1, an 6.6.0.13 and all failed with the same error. Nero infotools says ASPI is installed, only one file is in there though, not 4 like some screen shots on here. Thats all I can think of that I've done
I've searched these forums up and down and haven't found a solution.
Here is te log of the failed burn.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 6/7/2005 12:34:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.13
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6112 F: CDRom0
AXV CD/DVD-ROM G: CDRom1
AXV CD/DVD-ROM H: CDRom2
AXV CD/DVD-ROM I: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514476kB)
Free physical memory: 314MB (321804kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.6.2005
UDF/ISO compilation
2:51:56 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
2:51:56 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
2:51:56 PM #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:51:56 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
2:51:56 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
2:51:56 PM #6 Text 0 File Writer.cpp, Line 122
Writer TOSHIBA DVD-ROM SD-R6112 running
2:51:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:51:57 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
2:51:57 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
2:51:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
2:51:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
2:51:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
2:51:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:51:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TOSHIBA DVD-ROM SD-R6112]
--------------------------------------------------------------
2:51:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
2:51:57 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:51:57 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
2:51:57 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:51:57 PM #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)
2:51:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:51:58 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
2:51:58 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
2:51:58 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
2:51:58 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:20:48 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B4A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0xBC 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
3:20:48 PM #26 CDR -1135 File Writer.cpp, Line 311
Write error
3:20:50 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:20:51 PM #28 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2276351
3:20:51 PM #29 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/7/2004 5:01:14 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for any help!!
|
Senior Member
|
8. June 2005 @ 11:52 |
Link to this message
|
Hi there,
Quote:
Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Is this the true ID of a Ritek G04 ?
Why am I asking, because of this:
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:20:48 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B4A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0xBC 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
You usually see this with bad media.
In a other message, someone said they had Taiyo Yuden TY02 but also had those weird codes, and a senior member mentioned they might be FAKE.
Are those FAKE Ritek G04 ?
Also several people said they had issues with Ritek G04, are they making cheaper quality now ?
Have you tryed a totaly different media brand and see if it makes a difference ?
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
trybenut
Junior Member
|
8. June 2005 @ 12:04 |
Link to this message
|
|
I used DVDInfoPro to get this info...
Media code/Manufacturer ID RITEKG04
Format Capacity Blank Disc
is that what you needed, if not, how do I get what you need and what software do I need?
I don't think it is bad media because they work on my dvd burner at home. It is a Pioneer 104/A04. Also in DVDInfoPro I do get a media code that has some hexidecimal number in I think with Ritekg 04. I wonder why they're blank in Nero?
I have tried different media, I have Imation RW's and they also work fine. I will try simulating these two discs when I get home and see what I get. Thanks for a quick response.
This message has been edited since posting. Last time this message was edited on 8. June 2005 @ 12:28
|
|
Advertisement
|
|
|
|
trybenut
Junior Member
|
8. June 2005 @ 14:46 |
Link to this message
|
|
here is a log from the home computer and a successful burn in an A04/104... no media code in this either. However I did find on a forum somewhere else that this usually means the media in't compatible with the burner and a generic template was used, usually fixed by upgrading your firmware. This has to be what is causing the problems...
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 5:51:12 PM
Nero version: 6.6.0.1 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-104> Version: 1.40 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.1
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 32049H2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340823A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-104 F: CDRom0
AXV CD/DVD-ROM H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261688kB)
Free physical memory: 134MB (138056kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.6.2005
UDF/ISO compilation
6:09:27 PM #1 Phase 112 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation started
6:09:28 PM #2 Phase 114 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation completed (no file modified)
6:09:28 PM #3 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:09:28 PM #4 Phase 111 File dlgbrnst.cpp, Line 1853
DVD-Video files sorted
6:09:28 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:09:28 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-104 running
6:09:28 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
6:09:29 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
6:09:29 PM #9 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
6:09:29 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
6:09:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
6:09:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
6:09:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:09:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-104]
--------------------------------------------------------------
6:09:29 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PIONEER DVD-RW DVR-104] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
6:09:30 PM #16 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
6:09:30 PM #17 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
6:09:30 PM #18 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
6:09:30 PM #19 Phase 32 File dlgbrnst.cpp, Line 1853
Simulation started at 2x (2,770 KB/s)
6:09:30 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:09:30 PM #21 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 28:15,547 (1695547ms) -> OK
6:09:30 PM #22 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
6:09:30 PM #23 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON
6:09:31 PM #24 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
6:09:31 PM #25 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:09:33 PM #26 Text 0 File Cdrdrv.cpp, Line 1284
18:09:33.889 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:18:22 PM #27 Text 0 File Cdrdrv.cpp, Line 1284
18:18:21.047 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:18:22 PM #28 Text 0 File Cdrdrv.cpp, Line 1284
18:18:22.779 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:18:24 PM #29 Text 0 File Cdrdrv.cpp, Line 1284
18:18:24.552 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:23:23 PM #30 Text 0 File Cdrdrv.cpp, Line 1284
18:23:22.030 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:23:23 PM #31 Text 0 File Cdrdrv.cpp, Line 1284
18:23:23.692 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:26:30 PM #32 Text 0 File Cdrdrv.cpp, Line 1284
18:26:29.890 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:26:30 PM #33 Text 0 File Cdrdrv.cpp, Line 1284
18:26:30.491 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:31:41 PM #34 Text 0 File Cdrdrv.cpp, Line 1284
18:31:41.568 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:33:24 PM #35 Text 0 File Cdrdrv.cpp, Line 1284
18:33:23.645 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:33:24 PM #36 Text 0 File Cdrdrv.cpp, Line 1284
18:33:24.716 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:33:25 PM #37 Text 0 File Cdrdrv.cpp, Line 1284
18:33:25.948 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:01 PM #38 Text 0 File Cdrdrv.cpp, Line 1284
18:37:00.797 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #39 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.139 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #40 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.369 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #41 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.409 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #42 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.449 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #43 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.690 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #44 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.730 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:02 PM #45 Text 0 File Cdrdrv.cpp, Line 1284
18:37:02.770 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #46 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.010 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #47 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.050 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #48 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.090 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #49 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.311 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #50 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.351 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #51 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.391 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #52 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.631 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #53 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.671 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #54 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.721 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #55 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.952 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:03 PM #56 Text 0 File Cdrdrv.cpp, Line 1284
18:37:03.992 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #57 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.032 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #58 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.182 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #59 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.222 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #60 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.262 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #61 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.302 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #62 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.342 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:04 PM #63 Text 0 File Cdrdrv.cpp, Line 1284
18:37:04.663 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:05 PM #64 Text 0 File Cdrdrv.cpp, Line 1284
18:37:05.303 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:05 PM #65 Text 0 File Cdrdrv.cpp, Line 1284
18:37:05.924 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:06 PM #66 Text 0 File Cdrdrv.cpp, Line 1284
18:37:06.175 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:06 PM #67 Text 0 File Cdrdrv.cpp, Line 1284
18:37:06.225 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later
6:37:36 PM #68 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD-RW DVR-104 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
6:37:36 PM #69 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:37:37 PM #70 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 2286111
6:37:39 PM #71 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
6:37:39 PM #72 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
6:37:43 PM #73 Phase 33 File dlgbrnst.cpp, Line 1853
Simulation completed successfully at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
