|
|
|
My dvd writer dont burn dvd's!!
|
|
AfterDawn Addict
|
16. July 2005 @ 23:58 |
Link to this message
|
|
awwww @ alkohol, you're making me blush~ LOL
you just got yet ANOTHER promotion in my TY army~ consider yourself a lieutenant now :)
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
Advertisement
|
 |
|
|
Moderator
|
17. July 2005 @ 00:51 |
Link to this message
|
|
@alkohol - why thank you kind sir
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Senior Member
|
17. July 2005 @ 01:14 |
Link to this message
|
Hello Kivory, Alkohol, Creaky
Guess what, i managed to find a log, i dont know what im looking at but...
====== *** NeroAPI, History File *** ======
1A...
1A...
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.15
Using interface version: 6.6.0.8
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 15e
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS03 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD-16X OEM316B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVD-16X OEM316B D: CDRom0
TSSTcorp CD/DVDW TS-H552B E: CDRom1
NERO IMAGEDRIVE2 G: CDRom2
Generic STEALTH DVD F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458224kB)
Free physical memory: 76MB (77952kB)
Memory in use : 82
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.7.2005
NeroAPI
00:03:40 #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
00:03:43 #2 Text 0 File Reader.cpp, Line 127
Reader running
00:03:43 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
00:03:43 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
00:03:43 #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
00:03:44 #6 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
00:03:45 #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1577743 (350:36.43, 3081MB)
00:03:45 #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
00:03:45 #9 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
00:03:45 #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:03:45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1577744 (1577744) = #1577744/350:36.44
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1577744 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
00:03:45 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3231219712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1577744 | lead-out | 1 | 0x41 | 0x00
00:03:54 #13 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
00:03:54 #14 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
00:03:54 #15 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
00:03:54 #16 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
00:03:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:03:57 #18 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00:03:57 #19 Phase 98 File APIProgress.cpp, Line 276
Start formatting disc before burning
00:04:13 #20 Phase 100 File APIProgress.cpp, Line 276
Formatting disc was successful
00:04:14 #21 Text 0 File DVDPlusRW.cpp, Line 663
Start write address at LBA 0
DVD high compatibility mode: Yes
00:15:04 #22 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1577744 (181310h), lenght 0 blocks
00:15:04 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
00:15:07 #24 Text 0 File DVDPlusRW.cpp, Line 881
Media-Format will be stopped after burning
00:15:07 #25 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
00:15:19 #26 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:14 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Now, this was done on a DVD-RW, if it was on a DVD-R, the writer would of stoped just after the lead-in.
Work your magic gents...
|
Senior Member
|
17. July 2005 @ 01:18 |
Link to this message
|
|
Oh, another thing, i will still need your help, but because my mrs is having a baby tomorrow, i might disapear for a few days. Might. Might not. Thanx.
|
Moderator
|
17. July 2005 @ 01:22 |
Link to this message
|
|
good luck with that!, somehow me thinks dvds will take a backseat for quite some weeks/months :)
i got your logfile in notepad - have found a few problems, will paste results shortly; a lot of us around here are quite sad, we're here most days/nights..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
17. July 2005 @ 01:29 |
Link to this message
|
|
Sad? You mean sensible! At least you're not outside robbing and stealing, or getting pissed so you can have your weekly fight. Trust me, it's much safer to be here on the computer trying to catch up on learning about how it works... I still get pissed here tough.. :)
|
Moderator
|
17. July 2005 @ 01:34 |
Link to this message
|
@permiggs -
Yeah, you're definitely right there, sensible is good. Though I just got back from a week working in Germany, with some salesmen also. So was pissed every night, big food also every night; i was imagining what it must be like being a salesman, living like that all the time, can't be good for your health, eating and drinking to excess with customers every night.
Quote:
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
- install latest 4.71 here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Quote:
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS03
- The firmware on your burner is way out of date, for Samsung TS-H552B it was TS10 about a week or more ago - http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=28 - the link isn't responding at the moment though. you could look on the Samsung website in the meantime
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD-16X OEM316B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 4 ID 0 DMA: Off
- not sure if you need DMA to be ON for those virtual drives. still might be worth checking - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 447MB (458224kB)
Free physical memory: 76MB (77952kB)
Memory in use : 82
- you need to free up more memory as you're in virtual memory territory
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1577743 (350:36.43, 3081MB)
- this movie is ok sizewise, but if you use DVD Shrink, set target size in Shrink's preferences to 4300MB, thus avoiding outer edge of discs
Quote:
if it was on a DVD-R, the writer would of stoped just after the lead-in.
- download dvdinfopro (free from www.dvdinfopro.com) and run one of those -R's thru it's media info check, pasting results here
My personal suggestion would be Verbatim datalifeplus from www.svp.co.uk.
Yesterday i burned a fair few 16x Verbs (at 4x). Plus it's best to keep to 4x to reduce chance of dodgy burns. ps not sure what maximum speed discs you can use on your drive, mine is ok with 16x though i still only trust burning at 4x. I tried 8x for a while but had the odd disc that wouldn't work so i went back to 4x
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 17. July 2005 @ 01:37
|
Senior Member
|
17. July 2005 @ 02:06 |
Link to this message
|
|
Bloody hell! Kivory and Alkohol are right: You're the man :)) That's a hell of a lot of info, i'll keep posting as i go along ok?
|
Moderator
|
17. July 2005 @ 02:07 |
Link to this message
|
|
lmao :)
yup, no worries..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
17. July 2005 @ 02:44 |
Link to this message
|
OK Let's see if i got it covered...
Got the winaspi file updated, but there's no setup file with it, will it auto update itself? There's an install batch file here, when i select it, it open a ms-dos window, and it just says press any key. On the aspichk it still shows ver 4.6 tough...
I have just downloaded the ts10 update from samsung.com but the download software doesn't seem to work. It just freezes.
I can't find a way to change DMA node in the virtual drives, tried the way you told me (i printed it on paper) but i can't find the channel. Both my drives are in the secondary IDE channel, where are the virtual ones?
Free up some memory? How do i do that, do i just delete programs?
I'll have DVD Shrink in a minute.
I have DVD identifier, is that any good? i can give you a log if you want.
Germany? They have the beer festival, it lasts for a week! Did you have a go at the autobahns? Mate, beeing a salesman is harder than what it looks, although you do do a bit of traveling wich isn't that bad at all.
Thanx
|
Moderator
|
17. July 2005 @ 02:54 |
Link to this message
|
Quote:
Got the winaspi file updated, but there's no setup file with it, will it auto update itself? There's an install batch file here, when i select it, it open a ms-dos window, and it just says press any key. On the aspichk it still shows ver 4.6 tough...
- that link i sent you has the exe file to download. download and run it..
Quote:
I have just downloaded the ts10 update from samsung.com but the download software doesn't seem to work. It just freezes.
you'd need to run it from dos or windows 98 boot disk i guess - i suppose you could visit www.bootdisks.com and make yourself a Windows 98 boot disk. can be far too much hassle but without more to go on re the freezing can't think of much else to suggest
Quote:
I can't find a way to change DMA node in the virtual drives, tried the way you told me (i printed it on paper) but i can't find the channel. Both my drives are in the secondary IDE channel, where are the virtual ones?
- if you can't find them then don't worry about it. as i say, i wasn't sure if they'd be relevant
Quote:
Free up some memory? How do i do that, do i just delete programs?
- naw, just close down some programs
Quote:
I have DVD identifier, is that any good? i can give you a log if you want.
- yup, that should be fine, i'm just a bit rusty on that one as haven't used it for ages
Quote:
Germany? They have the beer festival, it lasts for a week! Did you have a go at the autobahns? Mate, beeing a salesman is harder than what it looks, although you do do a bit of traveling wich isn't that bad at all.
- naw, we just drove 10mins each way from hotel to workplace. i'm a techie so don't get to travel hardly at all, so enjoy it when i can
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
17. July 2005 @ 03:24 |
Link to this message
|
Hello again.
This is the DVD identifier "write capabilities on this disk" log:
** INFO : Drive = TSSTcorp CD/DVDW TS-H552B [FW TS03]
** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW
** INFO : Write Capabilities = DVD-R DVD-RW
** INFO : Disc = [DVD-R:MXL RG03]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below
** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 11080 kBps ( 8.00x) - [Pure CAV]
Descriptor #2 = 8310 kBps ( 6.00x) - [Pure CAV]
Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 2770 kBps ( 2.00x) - [CLV/Non-Pure CAV]
** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]
Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #4 = 2770 kBps ( 2.00x) - [CLV/Non-Pure CAV]
I have ran the aspi file, rebooted it but it is still showing ver 4.6... I really don't know what am i doing wrong. But i'm fighting it.
|
Moderator
|
17. July 2005 @ 03:28 |
Link to this message
|
|
i wouldn't worry about the ASPI for now then. as for Maxell discs, i don't use them myself, but believe they're pretty good. So, we're back to firmware as that's the crux of it, if firware is out of date it won't recognise media correctly/or newer media/or burn speeds etc
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
17. July 2005 @ 03:30 |
Link to this message
|
|
I have force aspi 17 installed on my computer, when i instaled it with the ms-dos batch, it installed without probs. But this new version, don't seem to be doing much, it opens, and nothing happens, it just says press any key.
Normally it would say software updated, reboot your computer, isn't it?
|
Senior Member
|
17. July 2005 @ 03:41 |
Link to this message
|
|
The flash software don't seem to work. What should i do?
I tell you what Creaky, if get trough this prob i'm buying you a pint mate.
|
Moderator
|
17. July 2005 @ 03:43 |
Link to this message
|
|
i think you may need to do the windows 98 boot disk thing...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
17. July 2005 @ 03:46 |
Link to this message
|
|
just had another thought. you may have to disconnect that other dvd drive to allow the flashing process to work. it's probably confused seeing two drives. or it's trying to flash the wrong drive cus you have 2 drives there..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
17. July 2005 @ 05:35 |
Link to this message
|
|
I've disconected the dvd drive to see if it would do anything, but it still freezes, downloaded the ntfs flopy thing, to make the boot disk, but when i try to make it, it says that is missing the required component... For some reason the samsung flash program that i downloaded to upgrade the firmware, makes my windows explorer crash, so i have to restart the computer on the plug, any idea why?
|
Moderator
|
17. July 2005 @ 05:46 |
Link to this message
|
|
i know what to do to get round this kind of thing but it's not the easiest thing to put into words or whatever. it's all do-able, just takes a little fiddling, or putting burner in a.n.other pc sometimes is easier
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
17. July 2005 @ 11:01 |
Link to this message
|
|
I've been messing around with this computer all day, i understand the problem is got to be the firmware. Tried Samsung's flash software, didn't work. Tried the boot disk, didn't work. Ran out of ideas, and pacience. I'll try again tomorrow. Thank you guys specially Creaky, You ARE the MAN!
|
Moderator
|
17. July 2005 @ 11:04 |
Link to this message
|
|
you'll suss it out, it's gotta be something simple
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
17. July 2005 @ 19:56 |
Link to this message
|
@permiggs,
Maxell is another top notch media; it is as genuine as TY and Verbatim. I strongly deem that Maxell is also made by Hitachi Corp. (in Japan). In addition, some websites even list Maxell as top quality just a little higher than TY and Verbatim, but as far as I know, they're all equally the same.
Looks like creaky has taken care most of the issues for you already. Anyways, have you tried saving your Samsung's updated firmware into a cd-r disc? Once you're completed, then put the disc into your dvd burner and open up it's updated firmware from Star, Run, then browse to your dvd burner drive, open up it's firmware updated and hit OK? This is the only alternate way that I can think of updating beside just double click on its firmware after you've completed downloading. I did this method to update on my 2 yr old Toshiba dvd rom drive (that's what the readme notepad said) and it's working fine. Worst of all, I'd said just "reformatted" your computer and start from fresh.
Permiggs, here is an example of a successful backed up log from Nero. I'm using Maxell 8X DVD+R "Made In Japan" to back up "Million Dollar Baby" by using DVD Decrypter and Nero. Just for an example that's all.
David X
Home Uses
1a23-
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TOSHIBA ODD-DVD SD-M1802 E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 599MB (614368kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.7.2005
UDF/ISO compilation
3:42:33 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
3:42:33 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
3:42:33 AM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:42:33 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
3:42:33 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
3:42:33 AM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
3:42:33 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:42:34 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:42:34 AM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
3:42:34 AM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2273839 (505:17.64, 4350MB)
3:42:34 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
3:42:34 AM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
3:42:34 AM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:42:34 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2273840 (2273840) = #2273840/505:17.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2273840 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
3:42:34 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4656824320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2273840 | lead-out | 1 | 0x41 | 0x00
3:42:34 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
3:42:34 AM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
3:42:34 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
3:42:34 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
3:42:34 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:42:34 AM #21 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
3:42:34 AM #22 Text 0 File DVDR.cpp, Line 5524
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
3:42:34 AM #23 CDR -1207 File DVDR.cpp, Line 4971
Book Type automatically set to: DVD-ROM
3:42:34 AM #24 Text 0 File DVDPlusRW.cpp, Line 663
Start write address at LBA 0
DVD high compatibility mode: Yes
3:50:25 AM #25 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2273840 (22B230h), lenght 0 blocks
3:50:25 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:50:54 AM #27 Text 0 File DVDR.cpp, Line 5524
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Changing the Book Type was finished successfully, return code 0
3:50:54 AM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
17. July 2005 @ 20:07 |
Link to this message
|
|
sorry, been at work all day, finally time to catch up on things...seems like creaky has done his excellent work again in finding the problems...i personally think it's down to firmware now~ once we get that resolved...things should be good~ maxell is decent media, i have used a few in the past, but, not extensively~
hmm...about installing that firmware...once you download it from either samsung or rpc, there should be an auto exe file~ double clicking SHOULD just make the install start...lemme think about it some more...
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
Senior Member
|
18. July 2005 @ 07:09 |
Link to this message
|
|
Well, i finally managed to update the firmware, i got the same samsung flash software from some dodgy site... It's still not burning tough. I'm starting to get desperate...
|
|
Advertisement
|
|
|
Senior Member
|
18. July 2005 @ 07:11 |
Link to this message
|
|
Kivory, how can i get a fancy foto like your one on my thread?
|
|
