|
copying ps2 games
|
|
Member
|
21. July 2005 @ 13:28 |
Link to this message
|
|
i have a dvd burner and i need to copy a ps2 game. i tried copying a game and theres always an error. does anyone know the proper way??is there a specific program?
|
|
Advertisement
|
 |
|
|
|
manufan
Member
|
21. July 2005 @ 13:45 |
Link to this message
|
|
|
|
atvdave
Newbie
|
21. July 2005 @ 14:28 |
Link to this message
|
I?ve been searching the forms the last few days and cant seem to find a hard answer of YES or NO on burning PS2 games with DVD Decrypter.
I insert my original ps2 game into my DVD burner. I select ISO read, it writes to my hard drive. After it?s complete I replace the game disk with a blank DVD-R (Memorex 8x media) and select ISO write, it then copies the ISO file to my DVD-R at 4x speed.
Using the swap magic 3.3 slide card system, load the DVD swap magic disk, replace the swap magic disk with the DVD-R copy, the screen always reads ?Not A Valid PS2 Disc?
My PS2 is v9.
A question? DVD Decrypter writes 2 files to my hard drive. A ISO file and a MDS file.
The ISO file is large and the MDS file is very small like about 4kb or so. I have tried to burn both file onto the disc together but dvd decypter won?t let me, so I just burn the ISO file cauls it?s the largest one, like 200 meg to 2.7 gig depending on the game I am copying.
Should I be copying the MDS file to the burner? Or ISO? Or both?
I think the media is OK cauls I have copied a few DVD movies with the same batch of DVD-R?s that I am using with Clone DVD and they all worked fine.
If this question has already been asked than I?m very sorry, I just haven?t been able to find the answer.
Thanks Dave
|
|
Trainp
Junior Member
|
21. July 2005 @ 14:36 |
Link to this message
|
Alot of people use DVD Decrypter to make a copy of their games thats cooleveryone has theor own methods and programs that they use and that work...i personally only use Nero to make my copies and i only use DVD Decrypter when i have to patch it with dnas....
|
|
Ripper666
Junior Member
|
21. July 2005 @ 17:28 |
Link to this message
|
Trainp, can you really burn PS2 games with Nero (I have 6.6), how? and exactly how do you patch the DNAS with DVD Decrypter? I'm new to that, thanx
|
AfterDawn Addict
|
21. July 2005 @ 19:50 |
Link to this message
|
DVD Decrypter tutorial
http://home.earthlink.net/~moderator/id4.html
you burn the MDS file
And Nero will work but DVD Decrypter does a better job and is easier to use, and is free
always buy good media like Philips, TDK, Verbatim Ritec G04
What works for movies will not always work for games. Movies you can use any old discs and games need to have good media for the best success.
Never burn higher than 4X for best results
Memorex discs are just crap! Never worked for me with games, movies worked ok but not games at all.
|
|
gillies
Member
|
22. July 2005 @ 01:01 |
Link to this message
|
|
atvdave. if you are getting the message "not a valid ps2 disc" and you are using swapmagic you should not see that screen i think you are not using your slide tool correctly. if it was just a bad copy or didnt work properly you would get a black screen or red border screen.some one here the other day was not using their slide tool to close the tray and was wondering why it didnt work.dvd decryptor will work fine. the media will be fine if you are making movies. your problem is definitly to do with your swapmagic. insert smd dvd wait till it loads then use slide card to open. then swap with your backup,push tray back in, using left side of tray. then insert slide tool again pull gently from right to left until it shuts/catches properly. press x.good to go, do not press eject button as this will bring up screen "not a valid ps2 disc" good luck.
|
|
aZnONE
Newbie
|
22. July 2005 @ 02:46 |
Link to this message
|
|
Ok guys, for those of you who mention about getting "not a valid PS2 disc" when using Swap Magic, try pressing the SQUARE button instead of the X button. Square button is for Special boot as X is for NOrmal. I got the "not a valid ps2 disc" message as well, but when press SQAURE, it boots fine. Try that and let me know. Im using SM 3.6 and tried it on 2.0 and works the same way.
|
Member
|
22. July 2005 @ 14:28 |
Link to this message
|
|
i have a dvd burner and want to copy a ps2 game... can someone tell me simple way (if there is) on how to copy a game. I dont know anything about patching and iso read...if there is anything simple that works fine please tell me.
|
|
gillies
Member
|
22. July 2005 @ 15:48 |
Link to this message
|
|
read these forums everything you need to know is here.
you need dvd decryptor or alcohol 120
you need swap magic or mod chip
look at the how to backup ps2 game guides and read them
|
|
atvdave
Newbie
|
22. July 2005 @ 19:44 |
Link to this message
|
Thanks Gillies, & aZnONE.
Steimy... Do I need to copy both the MDS & ISO file togeather? I tryed with DVD Decrypter and it would only let me copy one file, So I picked the ISO file.
or just the mds file?
I'm new at DVD Decrypter so maybe i'm doing somthing worng. Also i'll go the best buy later and pick up some diffrent dvd media.
Thanks for your help..
Dave
|
|
bbsleeper
Newbie
|
23. July 2005 @ 11:43 |
Link to this message
|
|
i'm new to this and i've been having some trouble copying games. i've been following the guide posted in another forum on how to do it but i keep getting errors when i try to use cddvdgen to convert files to bin files. the errors i get are "recording unit is not connected" and "initialization failed". i've tried everything i could think of to fix it but i've had no luck. any suggestions???
|
|
aZnONE
Newbie
|
24. July 2005 @ 02:03 |
Link to this message
|
Atvdave, ok, I don't know anything much about DVD Decrypter, but i did used it before and it is very simple. About the MDS and ISO files, you don't have to select both. Just select one and im sure either one will be fine. I haven't tried the MDS file yet, but i have read it somewhere online that it works the same way, but personally i would choose the ISO file. To me, the mds file is like the .cue file for .bin. and .img files, except mds is for the iso. As for burning, i recommend u to burn it at the slowest possible speed, possible 1x because some games will not work at all at higher speed. How do i know? Well, personal experience. I tried to burn Smackdown Shut Your Mouth at 2x and turned out it works but really slow and music is on and off while pictures are simultaneously freeze and go, but at 1x it works fine. Well, hope that help alil, if not, im sure someone here will now better. Good Luck!
|
Member
|
28. July 2005 @ 14:51 |
Link to this message
|
|
one i copy a ps2 game using dvd decryptor will it work on my ps2 or do i have to do something with swap magic and the modchip...i really dont want to go and get the swap magic and modchip because i heard that they might mess up my ps2..is it possible to copy a game with JUST dvd decryptor and a dvd burner????
|
AfterDawn Addict
|
28. July 2005 @ 19:13 |
Link to this message
|
like i said, with DVD Decrypter you burn the MDS file.
I have made many back ups and that is what i do.
Set your write speed to 1X for 4X DVD's and 4X with 8X DVD's
And make sure they are good quality DVD's
And no you can not play any back ups on your PS2 without modding it in some way. Usually the "not a valid PS2 disc" is due to 1.the fact that you are using cheap media, 2. that you just got a bad burn, 3. that that particular game needs to be rubuilt as some do with swap magic.
|
|
aZnONE
Newbie
|
29. July 2005 @ 23:53 |
Link to this message
|
|
steimy, you are absolutely right about burning everything, but i just wanted to add one thing and that is that i dont think it matters to which files u burn, MDS or ISO, both will work just fine as i just tested a while ago. Well good luck and yes MODCHIP or Swap Magic is required to play back up games, other possibilities can be Gameshark 2 v2, and i think Action Replay?..not sure bout AR but Gameshark2 v2(one of the first gameshark version released for ps2) will sure work.
|
|
wiredbojo
Member
|
30. July 2005 @ 00:36 |
Link to this message
|
|
lol from what i saw in the first posts it actually looks like someone is burning the mds and iso file onto a dvd.
eg. D:\games.iso and D:\games.mds
maybe im wrong but if i was a complete noob to ps2 burning i would probablyd o that :P
|
|
LigerFX
Newbie
|
11. August 2005 @ 03:32 |
Link to this message
|
I have a question:
How come every time I burn a game it works fine at the first try but subsequently when I want to play it again it doesn't work anymore. The ps2 seems to making noises indicating that it can't read the disc or something.
Can someone tell me why?
I have a modded ps2 (infinity mod chip I think...that's what is displayed on the boot screen)
burned the games using TDK now using Ritek media DVD-R. Burn at 4X
Pioneer DVD Burner.
Pls help, this is driving me nuts!!
|
|
sly294
Newbie
|
11. August 2005 @ 04:49 |
Link to this message
|
|
I also have a problem booting some games days after they were working fine, My Midnight Club Dub, Juiced, GT4 (ripped to dvd5), F1 2005.. and a few more, Once they were working perfect but now either they dont load or are very very slow to where its unplayable.
I have the Crystal Chip with the latest Firmware and Bootmanager 1.6.
i've burnt over 30 games and about 5-6 are having probs. Im using the Ritek G05 and burning in Dvd Decrypter at 4X.
any help would be appreciated
oh and they are DVD-R
This message has been edited since posting. Last time this message was edited on 11. August 2005 @ 04:50
|
|
wiredbojo
Member
|
11. August 2005 @ 05:41 |
Link to this message
|
|
i found that dvd-r's are weak as piss
just being put in the ps2 seems to scratch them enough to not work with modchips.... also dvd players
best bet is buying dvd+rs in cases, so far these have worked 100% of the time for me,
aviod buying spindles, they may be cheap, but the dvds can come scatched ( two 25 spindles i have are useless!!!!!!), also you dont have a case for em once burnt
|
|
LigerFX
Newbie
|
11. August 2005 @ 08:59 |
Link to this message
|
|
Are you saying that DVD+R works for ps2 games?
If I had known earlier...this is because I read somewhere that DVD-R are the way to go for burning games. still a noob u see. Thx for the info anyway.
Also, wiredbojo, few more questions:
what program did you burn the games with?
and what mod chip are you using?
any particular dvd+r media which is the best?
This message has been edited since posting. Last time this message was edited on 11. August 2005 @ 09:03
|
|
wiredbojo
Member
|
12. August 2005 @ 05:36 |
Link to this message
|
okay, u might probably have to find whats best for you...
i have a rather old modchip, nice n picky about wot it likes to play... some dvd-r's have worked (cased and top notch brand like sony or sumtin). pretty much all dvd+rs work that i have tried,
ive used Nero and dvd decryptor over most of these dvds and yeah.
id suggest buying singles or 5 packs, until u can find a brand that u trust
|
Member
|
22. August 2005 @ 19:14 |
Link to this message
|
|
i wanted to know...if you burn a ps2 game which has onine capabilities is it safe to use the game with a mod-chip in you ps2???
can you even play online games with a mod-chip in your ps2??
also i wanted to know if the mod-chip can damage or even ruin your ps2
Thank you
|
|
wiredbojo
Member
|
23. August 2005 @ 00:51 |
Link to this message
|
|
huh?... modchips are safe... if u get a decent one and get it installed properly...
i mean there is always a risk... so choose what u want to choose
|
|
Advertisement
|
|
|
Member
|
2. December 2005 @ 14:57 |
Link to this message
|
|
i made a backup of my battlefield 2 modern combat game and i use swap magic to play it. I have one problem and that is to play online. It says authenticating DNA$ data and then thers and error..Do i have to patch it or something, if so please tell me how..
Thank You
|
