|
|
|
Nero Error "Illegal disc" & "Could not perform end of Disc-at-once"
|
|
|
Phase_K
Newbie
|
5. August 2005 @ 04:36 |
Link to this message
|
|
Hi,
I'm having problems durning DVD's with my Matshita DVD in my Sony Vaio laptop, it seems a bit hit and miss, I'm getting 50% coasters. I have updated my firmware but no luck. Here is my log file:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/04 17:35:34
Nero Version: 6.6.0.8
Recorder: <MATSHITA UJ-820D> Version: 1.01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA UJ-820D >Version: 1.01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
MATSHITA UJ-820D F: CDRom4
Generic STEALTH DVD G: CDRom1
Generic STEALTH DVD H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 113MB (115900kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.8.2005
ISO compilation
13:12:57 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:12:57 #2 Text 0 File Reader.cpp, Line 127
Reader running
13:12:57 #3 Text 0 File Writer.cpp, Line 122
Writer MATSHITA UJ-820D running
13:12:57 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
13:12:57 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
13:13:02 #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2125807 (472:24.07, 4151MB)
13:13:02 #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
13:13:02 #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: MATSHITA UJ-820D, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
13:13:02 #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:13:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2125808 (2125808) = #2125808/472:24.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2125808 blocks [MATSHITA UJ-820D]
--------------------------------------------------------------
13:13:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [MATSHITA UJ-820D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4353654784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2125808 | lead-out | 1 | 0x41 | 0x00
13:13:02 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:13:02 #13 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
13:13:02 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:13:02 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
13:13:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:13:02 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: IS01....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 49 53 30 31 00 - 00 00 00 30 30 31 00 38 ...IS01....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
13:13:02 #18 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes
13:13:05 #19 Text 0 File Cdrdrv.cpp, Line 1287
13:13:05.785 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:13:33 #20 Text 0 File Cdrdrv.cpp, Line 1287
13:13:33.876 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:13:34 #21 Text 0 File Cdrdrv.cpp, Line 1287
13:13:34.557 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:13:55 #22 Text 0 File Cdrdrv.cpp, Line 1287
13:13:55.216 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:14:16 #23 Text 0 File Cdrdrv.cpp, Line 1287
13:14:16.447 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:14:37 #24 Text 0 File Cdrdrv.cpp, Line 1287
13:14:37.818 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:14:59 #25 Text 0 File Cdrdrv.cpp, Line 1287
13:14:59.028 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:15:20 #26 Text 0 File Cdrdrv.cpp, Line 1287
13:15:20.229 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:15:41 #27 Text 0 File Cdrdrv.cpp, Line 1287
13:15:41.349 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:16:02 #28 Text 0 File Cdrdrv.cpp, Line 1287
13:16:02.579 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:16:23 #29 Text 0 File Cdrdrv.cpp, Line 1287
13:16:23.850 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:16:47 #30 Text 0 File Cdrdrv.cpp, Line 1287
13:16:47.093 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:17:08 #31 Text 0 File Cdrdrv.cpp, Line 1287
13:17:08.364 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:17:29 #32 Text 0 File Cdrdrv.cpp, Line 1287
13:17:29.645 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:17:50 #33 Text 0 File Cdrdrv.cpp, Line 1287
13:17:50.805 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:18:12 #34 Text 0 File Cdrdrv.cpp, Line 1287
13:18:12.076 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:18:33 #35 Text 0 File Cdrdrv.cpp, Line 1287
13:18:33.376 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:18:54 #36 Text 0 File Cdrdrv.cpp, Line 1287
13:18:54.517 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:19:15 #37 Text 0 File Cdrdrv.cpp, Line 1287
13:19:15.857 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:19:37 #38 Text 0 File Cdrdrv.cpp, Line 1287
13:19:37.198 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:19:58 #39 Text 0 File Cdrdrv.cpp, Line 1287
13:19:58.399 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:20:03 #40 Text 0 File Cdrdrv.cpp, Line 1287
13:20:03.656 - MATSHITA UJ-820D\H1 T0 : Queue again later
13:20:05 #41 SCSI -400 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04450000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x09 0x1F 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x09 0x1C 0xA0 0x0A
0x00 0x32 0x00 0x00 0x03 0x01
13:20:05 #42 CDR -400 File Writer.cpp, Line 311
Unspecified target error
13:20:05 #43 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:20:05 #44 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:20:05 #45 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x83 0x00 0x00 0x30 0x05
13:20:05 #46 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x83 0x00 0x00 0x30 0x05
13:20:05 #47 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
13:20:05 #48 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
13:20:05 #49 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 2/8/05 10:00:23 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/04 02:05:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help gratefully received!
This message has been edited since posting. Last time this message was edited on 5. August 2005 @ 07:39
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
5. August 2005 @ 06:51 |
Link to this message
|
First, edit your post and remove your Nero Serial Number. It's the number near the top that starts with 1a23....
Your Nero is a bit out of date you may want to update it:
http://nero.com/us/nero-up.php
It looks like the burn process is well underway before the failiure occurs. That means that something is interfering with the process. I notice you have a fairly large memory in use number. Make sure you are not doing anything else while burning. Go into your task manager and disable any programs that are not being used but are running in the background.
As soon as I started looking for info about your media I started finding various articles and discussions about fake Taiyo Yuden media, this(Disc Manufacturer ID: IS01, Media Type ID: 001) apparently being one of them. Try using some different media. I like real Tayio Yuden.
Summary:
Update Nero
Free some memory resources
Use better media
Cheers,
Frank
|
|
d0z3r
Suspended due to non-functional email address
|
5. August 2005 @ 08:27 |
Link to this message
|
i'm running into the same problem....funny thing is, i was using memorex media and never burned a single coaster...but these issues started immediately...the very first fresh disk out of the spool. what makes this more troubling, is i was successful using this tdk media on my home pc w/o issue.....so i'm begining to wonder if god forbid its my matshita burner....and yes i have a vaio laptop model pcg-v505ecp. purchased it less than 4 mnths ago..i'm curious as to whether there have been issues w/these matshita burners...i believe im pretty up to date on the Nero patches and updated firmware etc...also asapi...but still am getting these burn failures...any assist would be greatly appreciated.....heres attached log...lemme know if i need to give more info and specifics.
tia
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
Recorder: <MATSHITA UJ-812> Version: K103 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA UJ-812 >Version: K103 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FA-80 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-812 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJ-812 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 607MB (621880kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.7.2005
ISO compilation
12:34:13 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:34:13 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
12:34:13 PM #3 Text 0 File Writer.cpp, Line 122
Writer MATSHITA UJ-812 running
12:34:13 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:34:14 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
12:34:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2216847 (492:37.72, 4329MB)
12:34:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
12:34:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: MATSHITA UJ-812, Media type: DVD-R
12:34:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:34:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2216848 (2216848) = #2216848/492:37.73
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216848 blocks [MATSHITA UJ-812]
--------------------------------------------------------------
12:34:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [MATSHITA UJ-812] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4540104704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2216848 | lead-out | 1 | 0x41 | 0x00
12:34:14 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:34:15 PM #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
12:34:15 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:34:15 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
12:34:15 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:34:15 PM #17 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode
12:34:15 PM #18 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON
12:34:15 PM #19 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes
12:34:15 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:41:27 PM #21 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03F70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x08 0x2D 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x08 0x2A 0x50 0x0A
0x00 0x2A 0x00 0x00 0x03 0x00
12:41:27 PM #22 CDR -400 File Writer.cpp, Line 311
Unspecified target error
12:41:28 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:41:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:41:28 PM #25 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was 535871
12:41:28 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
5. August 2005 @ 08:56 |
Link to this message
|
@d0z3r -
Quote:
i was using memorex media
- ..Memorex/CMC - don't let them near your Burner..... - http://forums.afterdawn.com/thread_view.cfm/195438
Quote:
what makes this more troubling, is i was successful using this tdk media
- TDK use differing quality manufacturers so you have to be careful which discs you buy as not all TDK will be equal.
Quote:
Recorder: MATSHITA UJ-812, Media type: DVD-R
- for some reason the discs aren't being properly recognised, all the drive can tell is that this is a -R disc. Buy decent media
Quote:
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Unspecified target error
- yup, Buy decent media
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
d0z3r
Suspended due to non-functional email address
|
5. August 2005 @ 09:23 |
Link to this message
|
|
@creaky
hey thanks for the quik reply, but any idea why this tdk media burned w/o issue on my home box w/different burner ???? i will def try a diff media but your thinkin its the tdk huh????
d0z3r
|
Moderator
|
5. August 2005 @ 10:55 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
d0z3r
Suspended due to non-functional email address
|
5. August 2005 @ 12:25 |
Link to this message
|
@creaky
ok, between your last reply and this i hav picked up some verbatim DVD+R at my local comp usa.... i'll give it a go in a few and hope to get back soonly....got the family obligations for the next few hrs. (on vacation right now) but this was troubling me so much, the sec i had internet connect i had to post...cross your fingers and lets hope the 20 spot i just dropped on this media is the cure all....
thanks again for your responses..
d0z3r
|
Moderator
|
5. August 2005 @ 12:28 |
Link to this message
|
|
@@d0z3r -
nice one, let us know how you get on when you can, have fun
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Phase_K
Newbie
|
12. August 2005 @ 05:34 |
Link to this message
|
@fastFrank
I did the updates suggested but no luck.
Bought new media (Verbatim +R) and problem solved, no more coasters. Cheers for the advice, lesson learned - stick to brand media. That does however leave me with 92 unused "Bulkpaq" DVD+R that are utterly useless. I'm thinking eBay for 99p no reserve with a warning...
Thanks everyone.
|
Moderator
|
12. August 2005 @ 05:40 |
Link to this message
|
|
@Phase_K - eBay is about the only good place for Bulkpaq, or in a wood burner :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Phase_K
Newbie
|
15. August 2005 @ 05:12 |
Link to this message
|
|
@creaky
lol I know that now! Lesson learned will stick to more well known media, now where did I put that wood burner?
|
|
d0z3r
Suspended due to non-functional email address
|
15. August 2005 @ 07:20 |
Link to this message
|
@creaky
well back in town and 6 discs into a new verbatim DVD-R spool and pure bliss.....not a single coaster.... thanks for the advise....still dont understand why these tdk's work fine in my home box.....but regardless.... never again ... i'll jus stick w/what i now know ... are there any other brands that u could recommend jus in case verbs arent avail the next time i need??
thanks again
d0z3r
|
Moderator
|
15. August 2005 @ 08:44 |
Link to this message
|
@Phase_K - nice one, happy burning
@d0z3r - again, nice one. The only other i personally recommend is Taiyo Yuden (TY)... BUT because they're generally regarded as THE best media, they're faked to buggery. However the other side of that coin is that they're talked about a lot, so the DVD-R media forum is full of threads on them, how to spot fakes, how to identy Genuine ones etc..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
1 product review
|
15. August 2005 @ 23:18 |
Link to this message
|
I also have the same problem, heres my log. I usually use Sony DVD+R, but my cousin gave me Memorex DVD+R to burn dvds for him and this came up. I think it is the media like someone stated above.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 12/21/2003 5:05:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R160L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MITSUMI CD-ROM FX48++W atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 200j E: CDRom0
MITSUMI CD-ROM FX48++W F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 543MB (556476kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.8.2005
NeroAPI
12:05:54 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:05:54 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:05:54 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:05:54 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:05:54 AM #5 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
12:05:54 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:05:54 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:05:54 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:05:54 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:05:55 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1036767 (230:23.42, 2024MB)
12:05:55 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
12:05:55 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 200j, Media type: DVD+R
12:05:55 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:05:55 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1036768 (1036768) = #1036768/230:23.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1036768 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
12:05:55 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2123300864, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1036768 | lead-out | 1 | 0x41 | 0x00
12:05:55 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:05:55 AM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
12:05:55 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:05:55 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
12:05:55 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:05:55 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05B00600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:05:55 AM #22 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:05:55 AM #23 Text 0 File DVDR.cpp, Line 5896
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:05:55 AM #24 CDR -1211 File DVDR.cpp, Line 5056
Book Type set to: DVD-ROM
12:05:55 AM #25 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: No
12:06:15 AM #26 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
12:06:15 AM #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc
12:06:15 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:06:15 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:06:16 AM #30 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:06:16 AM #31 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02A34E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:06:16 AM #32 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:06:16 AM #33 Text 0 File DVDR.cpp, Line 5896
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:06:16 AM #34 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:06:16 AM #35 Text 0 File DVDR.cpp, Line 5896
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:06:16 AM #36 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
12:06:16 AM #37 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:06:16 AM #38 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
12:06:16 AM #39 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:06:16 AM #40 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 12/21/2003 5:05:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 2:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
15. August 2005 @ 23:28 |
Link to this message
|
@Invasian - thought you were sorted out here - http://forums.afterdawn.com/thread_view.cfm/220301
let's have a look at this log...
Quote:
Recorder: HP DVD Writer 200j, Media type: DVD+R
- haven't read the other thread yet, but it looks like your firmware is out of date..OR the media is too new for your firmware to understand. The best your burner can tell is that the disc is a +R disc
Quote:
Illegal disc
Invalid field in command
- splat!, problem with the media..
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
- uninstall Nero, uninstall Nero completely via Nero Clean Tools - " Nero.com/en/Clean_Tools.html" class="korostus" target="_blank">http://www.Nero.com/en/Clean_Tools.html " and reinstall Nero, WITHOUT installing Nero's InCD (packet writing software), doesn't always play well with standard Nero Burning Rom..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
quest4kn
Newbie
|
16. August 2005 @ 05:05 |
Link to this message
|
I'm trying to burn on Verbatim DVD-R media with my Optorite DD0203 and getting the "Could not perform end of Disc-at-once" error at the end of the process. I've burned on this media fine with the same drive; this error only started popping up right after I did a reinstall of windows and upgraded to the new version of Nero. Any thoughts?
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <OPTORITE DVD RW DD0203> Version: 2.07 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <OPTORITE DVD RW DD0203 >Version: 2.07 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : OPTORITE DVD RW DD0203 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX160E atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y160P0 YAR4 ultra Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
OPTORITE DVD RW DD0203 K: CDRom0
SONY CD-RW CRX160E J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 666MB (682620kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.8.2005
ISO compilation
11:37:01 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:37:01 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
11:37:01 PM #3 Text 0 File Writer.cpp, Line 122
Writer OPTORITE DVD RW DD0203 running
11:37:01 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:37:01 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:37:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2263247 (502:56.47, 4420MB)
11:37:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:37:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: OPTORITE DVD RW DD0203, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:37:01 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:37:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2263248 (2263248) = #2263248/502:56.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263248 blocks [OPTORITE DVD RW DD0203]
--------------------------------------------------------------
11:37:03 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [OPTORITE DVD RW DD0203] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4635131904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2263248 | lead-out | 1 | 0x41 | 0x00
11:37:03 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:37:04 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
11:37:04 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:37:04 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
11:37:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:37:04 PM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
11:37:04 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON
11:37:04 PM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
11:37:04 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:07:26 AM #21 Text 0 File WriterStatus.cpp, Line 116
<OPTORITE DVD RW DD0203 > start writing Lead-Out at LBA 2263248 (2288D0h), lenght 0 blocks
12:07:26 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:07:27 AM #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2263247
12:07:31 AM #24 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
12:08:17 AM #25 SCSI -1119 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03896000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x04
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x04
12:08:17 AM #26 CDR -1119 File ThreadedTransferInterface.cpp, Line 1909
Track following error
12:08:17 AM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
Could not perform end of Disc-at-once
12:08:17 AM #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1
12:08:17 AM #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
OPTORITE DVD RW DD0203\H0 T1
12:08:17 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:08:17 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
16. August 2005 @ 05:12 |
Link to this message
|
@quest4kn -
Quote:
Recorder: <OPTORITE DVD RW DD0203> Version: 2.07
- wow, your burner's firmware is waaaay out of date, latest here is 2.50 - http://forum.rpc1.org/dl_firmware.php?download_id=1605
Quote:
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : OPTORITE DVD RW DD0203 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX160E atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y160P0 YAR4 ultra Port 2 ID 0 DMA: Off
- DMA needs to be ON.fix it via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
- just for info, were you intending to do multisession discs ?
Quote:
Track following error
Invalid write state
- update the firmware, sort out the DMA settings, then try a 'simulation burn' which will ask for a blank disc and go thru the motions, but won't write to the disc. Hopefully the firmware and DMA settings will get you burning again..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 16. August 2005 @ 05:12
|
|
quest4kn
Newbie
|
16. August 2005 @ 10:45 |
Link to this message
|
Seems to have removed the error after I updated the firmware, thanks! Although the IDE bus properties say DMA is on for everything, which is weird....think it might have to do with my cables? I think I only have 40-conductor ribbon cables connecting these guys.
Quote:
- just for info, were you intending to do multisession discs ?
Might have accidentally had it set to multisession for that burn.
|
Moderator
|
16. August 2005 @ 10:50 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
quest4kn
Newbie
|
16. August 2005 @ 14:07 |
Link to this message
|
Got the 80 conductor cables in my comp now, but one of the hard drives is still not coming up as DMA in Nero, this one:
Quote:
DiskPeripheral : Maxtor 6Y160P0 YAR4 ultra Port 2 ID 0 DMA: Off
It's connected via an Ultra ATA plug-in board and not the IDE bus. Any thoughts on how to turn DMA on for this guy, or if it's even needed?
Thanks!
|
Moderator
|
16. August 2005 @ 14:16 |
Link to this message
|
|
@quest4kn -
i guess you'll need the drivers for that particular card then..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
raymon_d
Newbie
|
18. August 2005 @ 12:38 |
Link to this message
|
|
problem I need HELP!
1A23#####################
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00DAA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0
HL-DT-ST CD-RW GCE-8525B F: CDRom1
Generic DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 288MB (295800kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.8.2005
ISO compilation
22:28:27 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:28:27 #2 Text 0 File Reader.cpp, Line 127
Reader running
22:28:27 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
22:28:27 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
22:28:27 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1963679 (436:22.29, 3835MB)
22:28:27 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
22:28:27 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
22:28:27 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:28:27 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1963680 (1963680) = #1963680/436:22.30
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1963680 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------
22:28:28 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4021616640, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1963680 | lead-out | 1 | 0x41 | 0x00
22:28:28 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:28:29 #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
22:28:29 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:28:29 #14 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2.4x (3.324 KB/s)
22:28:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:28:29 #16 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
22:28:29 #17 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
22:28:29 #18 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
22:28:29 #19 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:28:29 #20 SCSI -1046 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1D 0xF6 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
22:28:29 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1771
Illegal disc
22:28:29 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
Could not perform start of Disc-at-once
22:28:29 #23 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 18.8.2005 21:43:13
This message has been edited since posting. Last time this message was edited on 19. August 2005 @ 00:47
|
Moderator
|
18. August 2005 @ 22:54 |
Link to this message
|
@raymon_d -
Quote:
1A23-**************************
- EDIT OUT your serial number
Quote:
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06
- firmware is a few revisions behind. 1.0A is here - http://forum.rpc1.org/dl_firmware.php?download_id=1740
Quote:
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
- just for info, did you intend to do multisession ?
Quote:
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
- if the firmware update doesn't help, try better media
Quote:
Illegal disc
Simulation failed at 2.4x (3.324 KB/s)
splat!
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
raymon_d
Newbie
|
19. August 2005 @ 00:39 |
Link to this message
|
|
yea I guess I have to change media
and tnx
This message has been edited since posting. Last time this message was edited on 19. August 2005 @ 00:41
|
|
Advertisement
|
|
|
Moderator
|
19. August 2005 @ 00:43 |
Link to this message
|
|
no worries.
ps you still need to edit previous post and take out your serial number (the 2nd line of the post)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
