|
|
|
RICOHJPNR01 vs. RITEK R02
|
|
|
danadena
Junior Member
|
6. September 2005 @ 08:10 |
Link to this message
|
|
I recently bought several Ridata 50pks from Newegg. In the past I always got RICOHJPNR01, this time I got Ritek R02. Does anybody have any experience with the R02's?
Thanks for any info, on these.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
6. September 2005 @ 11:09 |
Link to this message
|
|
R02 is excellent media .. Depending on your make of writer and burning software, you will get the same results as you got using RICOHJPN .. Personally, my PC writer likes the RICOHJPN discs a little more (it's a Ricoh MP5240A) but my LiteOn set top recorders like the R02 a little more ..
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you dont know how to ignore a posting, complain to
me and I will be only too happy to demonstrate . . .
|
|
danadena
Junior Member
|
7. September 2005 @ 10:00 |
Link to this message
|
I have noticed a little shutter here and there with the R02's, but when I backup to where it shuttered and play it agian, it won't do it. I have a TEAC DVD+RW DV-W58E burner and use Nero to burn. I guess my set up likes RICOHJPNR01's better. Does anybody know where I can get anymore of the R01's? I also bought some Ridata 8x's and they shutter a little to.
|
AfterDawn Addict
6 product reviews
|
7. September 2005 @ 10:05 |
Link to this message
|
|
Try slowing down the burn speed. Never burn over 4x and if you were burning at 4x try 2.4x. Also is your f/w up to date?
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 7. September 2005 @ 10:06
|
|
danadena
Junior Member
|
7. September 2005 @ 10:07 |
Link to this message
|
|
How do I slow down my speed.
|
AfterDawn Addict
6 product reviews
|
7. September 2005 @ 10:30 |
Link to this message
|
|
What proggys are you useing?
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
danadena
Junior Member
|
7. September 2005 @ 11:07 |
Link to this message
|
|
What does that mean?
I did however find when I get ready to burn a copy it has a peed box with the choices of Max and 2.4. I set it on 2.4 and it took the same amount of time as when it is set on Max. So I guess I can only burn at 2.4.
|
AfterDawn Addict
6 product reviews
|
7. September 2005 @ 12:12 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
danadena
Junior Member
|
7. September 2005 @ 13:23 |
Link to this message
|
I use DVD decryter, DVD Shrink 3.2, and Nero. It has always taken about 20 min. to decryte, about 5-8 min. to shrink, and 27 - 29 to burn. Then if I make another copy for the other kid, I use Sonic and that takes 20 min every time.
As far as the other stuff you mentioned, I have no clue. I will try to find out what mode I am in. I believe I have seen it go into the slow mode with certain discs. It errored out a few times and then it will take about 45 min to decryte, but it will get it done. Then if I move on to another disc, it screams along as usual.
|
AfterDawn Addict
6 product reviews
|
7. September 2005 @ 13:38 |
Link to this message
|
|
You can select the burn speed in dvd shrink if you have enable burning with nero checked. After you click backup click on the burn settings tab. Note: you must have a blank dvd loaded into your dvd burner. 4x should take around 12-14 min and 2.4x probably 18-20 min. Make sure your drive is in DMA mode.
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 7. September 2005 @ 13:40
|
|
danadena
Junior Member
|
7. September 2005 @ 14:08 |
Link to this message
|
|
I just checked, Primary and Secondary are set to DMA mode.
|
|
danadena
Junior Member
|
8. September 2005 @ 07:11 |
Link to this message
|
|
How do I figure out what firmware I have? I found a website that says the R02 are compatible with my burner as long as I have 2.0B f/w.
|
AfterDawn Addict
6 product reviews
|
8. September 2005 @ 07:19 |
Link to this message
|
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
danadena
Junior Member
|
8. September 2005 @ 08:16 |
Link to this message
|
|
I downloaded and ran it. In the general info top line to the right it says "revision" D.0C
Is that the F/W? If so, how do I update it, should I update it?
|
AfterDawn Addict
6 product reviews
|
8. September 2005 @ 10:53 |
Link to this message
|
|
If that's what it said after revision then that is the f/w. I couldn't find a f/w update for a teac DV-W58C. I couldn't find DV-W58C period. I found the model DV-W58D but the f/w didn't resemble your f/w vs. You can try to google for an update or contact the manufacturer. Be careful, you can ruin a drive by flashing it with the wrong f/w.
Mort
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
danadena
Junior Member
|
8. September 2005 @ 11:17 |
Link to this message
|
Mine is a TEAC DVD+RW DV-W58E. I found a Dell upgrade to D.0N
I am scared to do it though. What are the odds it can goof up what I have?
|
AfterDawn Addict
6 product reviews
|
8. September 2005 @ 11:34 |
Link to this message
|
That sounds better. D.0C TO D.0N. I wouldn't be afraid to update the f/w if it was mine. If there is a problem you will usually get a screen saying no drive detected that uses this f/w. So thats got dell f/w vs. No wonder I couldn't find any drives with D.0C f/w. I did find teac f/w update here http://forum.rpc1.org/dl_firmware.php?download_id=1827 but I would try the dell f/w update 1st.
Make sure you don't have a disc in the drive when you flash it and do not power down during the flash. Read and follow the directions closely
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 8. September 2005 @ 11:41
|
|
danadena
Junior Member
|
8. September 2005 @ 12:05 |
Link to this message
|
|
Other then no disc in the drive, do I need to watch anything else?
|
AfterDawn Addict
6 product reviews
|
8. September 2005 @ 14:04 |
Link to this message
|
|
Make sure you don't loose power or shut down pc while flashing and be sure to select correct drive if you have more than 1. Very easy process really as you will find out once you've done it.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
danadena
Junior Member
|
8. September 2005 @ 16:47 |
Link to this message
|
|
I did it! I checked the revision and it shows D.0N.
Thanks for all the help.
|
|
Advertisement
|
|
|
AfterDawn Addict
6 product reviews
|
8. September 2005 @ 17:17 |
Link to this message
|
|
You're very welcome. Happy burning.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
