|
DVD X Copy Platinum problems...
|
|
|
cyclone20
Newbie
|
7. October 2005 @ 15:44 |
Link to this message
|
|
The software is not finalizing my dvd's. The software reads original dvds, copies them, but when I put the blank Philips DVD to get burned, does it, BUT, when the green task bar is full, the finalizing takes 10-15 minutes, it used to be under 1 minute. When the disc ejects, it says burn successful, but the discs do not read or play in any dvd players. What can I do?
|
|
Advertisement
|
 |
|
|
Moderator
|
8. October 2005 @ 07:49 |
Link to this message
|
|
cyclone20
Welcome to aD!
Sounds like the problem may be your blank discs. Make sure your firmware is up to date on your drive. I would also switch to a better brand of blank discs like Sony, Fuiji (look for made in Japan) or Verbatim DataLifePlus. Philips uses some iffy manufacturers.
Do the burned discs play in your pc? Have you tried any other copy software?
|
|
cyclone20
Newbie
|
8. October 2005 @ 17:52 |
Link to this message
|
|
I have both Philips and Verbatim blank DVD's. Neither seem to work, I have also tried formatting both discs to the burner drive. How do I update my firmware? Is there a patch I can download. Also, what other dvd burning software is out there that works like DVD X Copy?
|
AfterDawn Addict
|
8. October 2005 @ 18:05 |
Link to this message
|
If you want a program that is very similiar to Xcopy then you can try DVDFab Express, I believe you get a trial period with this software
http://www.dvdidle.com/dvd-fab-express.htm
It works exactly like Xcopy only it lets you control the burn speed. The developers of this offer the decrypter part of this software free it is DVDFab Decrypter and it is available at http://www.filepedia.com. You can use this in conjunction with the other free programs DVD Shrink, and to burn you can try ImgBurn developed by LUK who did DVD Decrypter. Available here
http://www.imgburn.com/
This message has been edited since posting. Last time this message was edited on 8. October 2005 @ 18:06
|
Moderator
|
8. October 2005 @ 23:07 |
Link to this message
|
@cyclone20
Try what arniebear suggested = there are many good programs to use other than X Copy. Stopped using X copy myself about a year ago.
What's the make and model of your drive? Need to check if your firmware is up tp date. I'd stick w/ the verbatim and stay away from the Philips unless they were made by a good manufacturer.
Here's a dl to check the manufacturer code:
http://dvd.identifier.cdfreaks.com/
This will also list your current firmware.
|
AfterDawn Addict
|
9. October 2005 @ 01:10 |
Link to this message
|
definitely stay away from Philips media, they SUCK big time~!
i compiled this list MYSELF on another thread found here:
http://forums.afterdawn.com/thread_view.cfm/241224
Philips DVD+R 4.7GB CMC MAG.E01 8x (crap)
Philips DVD+R 4.7GB CMC MAG.F01 4x (crap)
Philips DVD+R 4.7GB INFOME..R20 8x (crap again)
Philips DVD+R 4.7GB MBIPG101R04 8x (need i continue with crap?)
Philips DVD+R 4.7GB Philips.081 8x (philips SUCKS)
Philips DVD+R 4.7GB PHILIPS.C08 8x (the sucking continues)
Philips DVD+R 4.7GB PHILIPS.C16 16x (wow, sucks x2)
do yourself a BIG favor, get some GOOD quality media as the others suggested :)
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
cyclone20
Newbie
|
9. October 2005 @ 08:15 |
Link to this message
|
I checked the make and model of my DVD Burner and what I see is HL-DT-ST DVD+RW GCA 4040N
|
AfterDawn Addict
|
9. October 2005 @ 08:30 |
Link to this message
|
@cyclone20, If the above suggestions don't correct your problem you might want to try the DVD X Copy forum at this link. Its also listed at the page bottom. X Copy questions should be posted there.
http://dvdxcopy.afterdawn.com/
Good luck
Jerry
|
|
mackdl
Senior Member
|
9. October 2005 @ 14:34 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 9. October 2005 @ 14:36
|
Moderator
|
9. October 2005 @ 17:26 |
Link to this message
|
|
@cyclone20
What's your current firmware version? If you downloaded DVD Identifier
once you open the program you drive and current firmware will be listed under drive selection- the firmware version is listed after FW.
|
|
cyclone20
Newbie
|
9. October 2005 @ 18:01 |
Link to this message
|
|
still not sure if this is what im looking for, but its what was listed with other things>
[20:47:16] DVD Identifier V4.1.1
[20:47:16] Initializing ASPI/SPTI Drive Interface
[20:47:16] SPTI Drive Interface Successfully Initialized
[20:47:16] 1 Supported Drive Found (Out Of 1 Available Drive)
[20:47:16] Manufacturer Database [25-SEP-05@636$87] Loaded From File : (@636$87) Entries Found
[20:47:24] This Version Of 'DVD Identifier' Is Up-To-Date
[20:47:24] The Manufacturer Database Is Up-To-Date
[20:48:18] ERROR : Unable To Initialize Disc : Not ready - Medium not present [02/3A/01]
[20:48:19] ERROR : Unable To Initialize Disc : Not ready - Medium not present [02/3A/01]
[20:49:13] DVD+R/+RW Medium Detected. Starting Identification...
[20:49:13] ** Initiating ADIP Retrieval Method 1 (Original ADIP)
[20:49:13] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00]
[20:49:13] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted
[20:49:13] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP)
[20:49:13] ADIP Read Method 2 Completed Without Errors
[20:49:13] Disc Identification Completed Successfully
[20:49:25] DVD+R/+RW Medium Detected. Starting Identification...
[20:49:25] ** Initiating ADIP Retrieval Method 1 (Original ADIP)
[20:49:25] ERROR : ADIP Read M1 Failed : Illegal request - Invalid field in CDB [05/24/00]
[20:49:25] INFO : ADIP Read Method 1 Not Supported ; Method 2 Will Be Attempted
[20:49:25] ** Initiating ADIP Retrieval Method 2 (Copy Of ADIP)
[20:49:25] ADIP Read Method 2 Completed Without Errors
[20:49:25] Disc Identification Completed Successfully
[20:49:55] DVD+R/+RW Medium Information Copied To Clipboard
|
Moderator
|
9. October 2005 @ 18:45 |
Link to this message
|
Okay on the top of the program you'll see 'drive selection and drive write capabilities' under this you'll drive will be listed. It will have something like this '[D:]HL-DT-ST DVD+RW GCA 4040N [FW ????]
your firmware version will be next to the FW where I have the question marks. If you only have the one drive it will default to that if not you will need to click on scroll bar and highlight your burner.
You can also put a disc for the Philips that you have and see who the manufacturer is.
|
|
cyclone20
Newbie
|
9. October 2005 @ 18:47 |
Link to this message
|
|
[FW C110] it says
|
Moderator
|
9. October 2005 @ 19:03 |
Link to this message
|
Here's a link to the latest firmware C113:
http://forum.rpc1.org/dl_firmware.php?download_id=1997
I also would switch brands of discs.
As kivory666 said:
Quote:
definitely stay away from Philips media, they SUCK big time~!
Also if your using +r discs alot of older dvd players do not like this format.
|
|
cyclone20
Newbie
|
9. October 2005 @ 20:41 |
Link to this message
|
|
Ok i downloaded it, and after trying to use dvd x, it read the original copy, but when i put in a verbatim brand disc, it rejected it immediately and said to check the log file...now what
|
AfterDawn Addict
|
10. October 2005 @ 03:47 |
Link to this message
|
|
Do you have any other burning programs besides Xcopy? When you put the disk in does DVD Identifier find this one? You downloaded the firmware update, and you flashed your drive, correct?
|
|
cyclone20
Newbie
|
10. October 2005 @ 06:18 |
Link to this message
|
|
Do you have any other burning programs besides Xcopy? When you put the disk in does DVD Identifier find this one? You downloaded the firmware update, and you flashed your drive, correct?
Reply: I have no other burning softwares. Yes when I put the disc in the drive using DVD Identifyer it finds the disc. I did download the firmware update, and im not sure what flashing a drive is, so I must not have done that yet.....
|
AfterDawn Addict
|
10. October 2005 @ 06:39 |
Link to this message
|
For flashing click on the drive and then it will just flash your drive, when done reboot your PC and the new firmware should be there. Remember flashing a drive is always at your own risk, however without doing it the drive will not always recognize and write new media properly. You are running a Dell computer because this file is for a Dell.
Do you have Nero? You really need to try another program to see if it is a problem with Xcopy or the drive.
|
|
cyclone20
Newbie
|
10. October 2005 @ 07:39 |
Link to this message
|
|
Heres a little background about my drive. A month ago I had the same problem with my drive or software, after years of successful burnings, burning somehow just wasnt happening, so i contacted Dell, got a new drive, installed it and dvd x and it worked great for the first few dvds, but now its not burning dvds, which is why im on this forum, but my drive does however made music CDs just fine, but not DVD's. I have a hard time believing the problem is my new drive, but as for the software, I installed the same software on my roomates Dell, and his drive burns DVD's just fine....so im at all loss for explanations.....
|
AfterDawn Addict
|
10. October 2005 @ 07:58 |
Link to this message
|
|
What is the firmware on your friends Dell is it the same. Just because the drive burns CD's does not mean it does not have something wrong with it. It is hard to diagnose without comparing with another program. Is the drive selected in the drive select box of Xcopy as the burning drive?
|
AfterDawn Addict
|
10. October 2005 @ 07:59 |
Link to this message
|
1. Verify the media. Make sure you?re using the correct media for your DVD burner. +R or ?R. This is a common issue.
2.Run drive select, go to my computer >C-drive> programs files> 321 studios> platinum xpress> drive select, click on it. if you have only one drive it will not show anything, if you have two or more pick out your dvd burner. then go check the pcsetup folder same place as drive select in C drive. click the + sign to see if your burner is listed.
and check in device mgr to see if thge vso driver is listed there.
for more help on dvdxcopy products go here,
http://dvdxcopy.afterdawn.com/
|
|
cyclone20
Newbie
|
10. October 2005 @ 16:30 |
Link to this message
|
My burner is a DVD+ReWriteable. It has used DVD+R discs successfully for the last 3 years, but I just tried to burn a movie with the newest firmware but once again the finalizing stage took 10 minutes and the disc was ejected as "burn successfull" but will not play in any dvd player uncluding my laptop dvd player, even though the purple side of disc looks like it has been copied too...
|
|
Whisperer
Senior Member
|
10. October 2005 @ 19:25 |
Link to this message
|
Try and defrag your drive. And, if you have Norton Utilities/System Works, run Norton "WinDoctor" in the "Find and Fix Problems" section. Sometimes little bits of a program get scattered or lost and it takes so long for the HDD to find what it needs that it can cause a failure in fuctionality.
ALSO ... DON'T just blow-off media as not being your issue by overlooking the fact that media brands can change manufacturers and your favorite brand of blank disks may not work anymore. Just try buying Sony or another quality brand and try once more. Just to be sure.
If that doesn't work then you will probably have to reinstall DXC. Do you still have the original downloaded zip of the .exe? Pop over to the DXC forum and check out the "stickies" for how to reinstall and reactivate. Be sure to go to the right section for your version of DXC. Hope it doesn't become an ordeal for you because 321 is no longer alive and another company is handling authorizations for upgrades, activations and reinstalls. Or post a question to Ireland, over there, for help.
I myself still like and use DXC v1.5.2 often (very stable version), but I never liked or upgraded to Platinum. Besides the above program suggestions you might check out the CloneDVD and AnyDVD combination.
http://www.slysoft.com/en/
Best regards
Whisperer
This message has been edited since posting. Last time this message was edited on 10. October 2005 @ 19:35
|
|
cyclone20
Newbie
|
10. October 2005 @ 19:53 |
Link to this message
|
|
I checked my program files for DXC and it says .exe for Platinum and Xpress "Not found" is that whats causing these problems? If so is there a folder, patch or file I can download and unzip. The Platinum version I have is a two disc set, one disc for the software, the other for the authorization. I have the original XPress software, but I tried to re-install that and it says "Error (7) I have reached my maximum amounts of installations" So how can I get around that?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
10. October 2005 @ 20:02 |
Link to this message
|
|
i will tell you why platinum will not work,you have a crack version,
as the 2-set you have proves it as platinum only activates on line..and has only one disk..the 2nd disk is the crack to activate..after a while the program will quit working..and those files (.exe for Platinum and Xpress "Not found" }will quit working.
end of story.
|
