|
thank you creaky for replying, here is my log of the last session with serial omitted...
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
Nero version: 6.3.1.6
Recorder: <DVDRW IDE1004> Version: 0043 - HA 0 TA 2 - 6.3.1.6
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW IDE1004 >Version: 0043 - HA 0 TA 2 - 6.3.1.6
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2B020H1 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y160P0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : DVDRW IDE1004 nvatabus Port 0 ID 2 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE1004 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 453MB (464124kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.10.2005
ISO compilation
13:40:02 #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:40:02 #2 Text 0 File Reader.cpp, Line 118
Reader running
13:40:02 #3 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE1004 running
13:40:02 #4 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)
13:40:02 #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media
13:40:02 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1688415 (375:12.15, 3297MB)
13:40:02 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
13:40:02 #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: DVDRW IDE1004, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
13:40:02 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:40:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1688416 (1688416) = #1688416/375:12.16
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1688416 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------
13:40:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3457875968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1688416 | lead-out | 1 | 0x00 | 0x41
13:40:03 #12 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
13:40:03 #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
13:40:03 #14 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
13:40:04 #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 2x (2,760 KB/s)
13:40:04 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:40:04 #17 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 52 49 43 4F 48 - 4A 50 4E 57 30 31 01 39 ...RICOHJPNW01.9
23 00 8A 79 6A 02 1A 00 - 8E 7A 6A 02 1A 00 8C 7A #..yj....zj....z
6A 02 1A 23 13 10 F0 10 - 00 00 00 00 00 00 00 00 j..#............
13:40:04 #18 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 21:21,284 (1281284ms) -> OK
13:40:04 #19 Text 0 File DVDPlusRW.cpp, Line 618
Start write address at LBA 0
DVD high compatibility mode: Yes
14:01:02 #20 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE1004 > start writing Lead-Out at LBA 1688416 (19C360h), lenght 0 blocks
14:01:02 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:01:03 #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
14:01:03 #23 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK
14:01:03 #24 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 2x (2,760 KB/s)
14:01:03 #25 Phase 78 File dlgbrnst.cpp, Line 1841
Data verification started
14:01:26 #26 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
14:01:26 #27 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Recorder needs eject between burn and verify. Auto reload.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
14:10:50 #28 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1681
Read error on CD file
S.Hs.Universe.1997.ep1.DVDRip.DivX-NewMov.avi
14:12:18 #29 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1380
Status summary
Total files=10, identical=8, different=0, inaccessible=1, skipped=1.
14:12:18 #30 Phase 81 File dlgbrnst.cpp, Line 1841
Data verification failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03/06/2004 10:40:46 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
thanks
luigi
This message has been edited since posting. Last time this message was edited on 21. October 2005 @ 14:06
|
|
@luigi43
In addition to what Car.Mike had mentioned. You need to completely wipe out Nero from your system by using Nero's General Clean Tool.
((To enable DMA back ON by "uninstalling" your DVD burner or DVD rom driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on +sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of IDE ATA/ATAPI Controllers
(B) double left click on either Primary or Secondary IDE Channel
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer and Windows should detect your driver and reinstall it for you automatically. That's it... easy as smoking!!!
NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel. Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka "Primary IDE Channel" already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under what Channel, usually is "Secondary" <--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
This message has been edited since posting. Last time this message was edited on 21. October 2005 @ 18:40
|
