|
|
|
My Error Log
|
|
|
JohnStark
Newbie
|
26. October 2005 @ 09:58 |
Link to this message
|
|
Greetings, first time posting here.
I downloaded DVDShrink a few months ago and its worked great for me up until a few days ago. I've made backups of over 100 movies so far. However, the last few times I've tried to burn movies I keep getting errors while the movie is being burned to DVD. Previously I was using Teon DVDs, but when I ran out of those I bought some Memorex 8x -R DVDs. I had burned about 30 movies so far using the Memorex DVDs I bought the last few weeks with no problems, but suddenly the last 4-5 movies I've tried to make backup of have failed during the burn process.
The only thing I see in the error log that indicates a problem is where it states that the "Medium in drive: unknown", and yet these Memorex DVDs were burning just fine up until a couple of days ago. So even though the log indicates that the problem might be the discs I'm using, it seems odd that I was able to burn so many movies using these same discs prior to getting this error.
Here is the error log:
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <DVDRW IDE 16X> Version: A089 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : QUANTUM FIREBALLP AS60.0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : 56X CD-ROM atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE 16X E: CDRom0
56X CD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 1164MB (1192648kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.10.2005
NeroAPI
6:12:51 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
6:12:51 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
6:12:52 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
6:12:52 PM #4 SCSI -1196 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04FE5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x02
6:12:52 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:12:52 PM #6 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running
6:12:52 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:12:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:12:52 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:12:52 PM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:15:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1874271 (416:30.21, 3660MB)
6:15:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
6:15:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
6:15:34 PM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
6:15:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1874272 (1874272) = #1874272/416:30.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1874272 blocks [DVDRW IDE 16X]
--------------------------------------------------------------
6:15:34 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3838509056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1874272 | lead-out | 1 | 0x41 | 0x00
6:15:34 PM #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
6:15:34 PM #18 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
6:15:34 PM #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
6:15:34 PM #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
6:15:34 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:15:34 PM #22 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
6:15:34 PM #23 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
6:15:34 PM #24 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
6:15:34 PM #25 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:16:00 PM #26 Text 0 File Cdrdrv.cpp, Line 1286
18:16:00.703 - DVDRW IDE 16X\H1 T0 : Queue again later
6:16:12 PM #27 Text 0 File Cdrdrv.cpp, Line 1286
18:16:12.375 - DVDRW IDE 16X\H1 T0 : Queue again later
6:39:13 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0E480000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x12 0x16 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
6:39:13 PM #29 CDR -1135 File Writer.cpp, Line 311
Write error
6:39:13 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:39:13 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:39:14 PM #32 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1185279
6:39:14 PM #33 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
6:39:14 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:39:14 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 10/3/2004 1:33:05 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 10/3/2004 1:33:05 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 1:33:44 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any advice on what might be causing this error is greatly appreciated.
(Edited to remove my Nero key)
This message has been edited since posting. Last time this message was edited on 26. October 2005 @ 09:59
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
26. October 2005 @ 10:03 |
Link to this message
|
|
Hve you updated your firmware lately? Check your drive using the link in my sig.
Now to the Memosux issue. Get some better media. This stuff is crap. I'd bet that this is the problem. Memosux provides inconsistant media on a constant basis. If kivory666 see this, you will hear about it.
Get some TY's, Maxells, Sony's, Verbatims. Much better sucess rate.
|
|
JohnStark
Newbie
|
26. October 2005 @ 10:11 |
Link to this message
|
|
Yes, my firmware is up to date.
As far as the Memorex discs I'm using, I understand that they aren't very good, but as I stated I burned about 30 consecutive movies using them with no errors, and now every time I try to burn a movie the burn process fails. So to me, its not a matter of getting a good "success rate", as my success rate previously was 100% and which has now gone to 0%. To me, that seems to more likely indicate something else besides the media that I'm using.
|
|
Car.Mike
AfterDawn Addict
|
26. October 2005 @ 10:54 |
Link to this message
|
JohnStark,
Welcome to the forum. Below are the error codes
1. === Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : QUANTUM FIREBALLP AS60.0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : 56X CD-ROM atapi Port 1 ID 1 DMA: Off
Go to Device Manager and find the Ide/Ata controllers and then click on that to expand it. Now you will see the Primary and secondary controllers. Under primary fild the controller that is in PIO and right click it to uninstall it. Now go to the secondary controllers and find the device that is in PIO and right click that and uninstall it. Now re-boot and let Windows re-install the drives and devices
2. SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04FE5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Burner is not ready
3. Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
Some the worst disks on the market. Try Taiyo Yuden, or Verbatim
4. 6:39:13 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0E480000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Burner does not like the CMC disks. see above
Do you have Roxio on your computer. If you do remove the drag to disc module as it causes massive problems w/ burning DVD's
|
|
temj
Member
|
26. October 2005 @ 13:12 |
Link to this message
|
Quote:
"As far as the Memorex discs I'm using, I understand that they aren't very good, but as I stated I burned about 30 consecutive movies using them with no errors, and now every time I try to burn a movie the burn process fails. So to me, its not a matter of getting a good "success rate", as my success rate previously was 100% and which has now gone to 0%. To me, that seems to more likely indicate something else besides the media that I'm using. "
Having previously had successes with cheap media is no indication they're not the cause of the problem.
Their "quality control" is often not as good as other more expensive media, and you can easily end-up with a bad disc or even a bad batch of discs.
|
|
konfused1
Member
|
26. October 2005 @ 13:41 |
Link to this message
|
|
@temj:
Nice sig!
|
|
JohnStark
Newbie
|
28. October 2005 @ 08:52 |
Link to this message
|
Quote:
JohnStark,
Welcome to the forum.
Thanks.
Quote:
1. === Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : QUANTUM FIREBALLP AS60.0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : 56X CD-ROM atapi Port 1 ID 1 DMA: Off
Go to Device Manager and find the Ide/Ata controllers and then click on that to expand it. Now you will see the Primary and secondary controllers. Under primary fild the controller that is in PIO and right click it to uninstall it. Now go to the secondary controllers and find the device that is in PIO and right click that and uninstall it. Now re-boot and let Windows re-install the drives and devices
In Device Manager, Primary and Secondary IDE/ATA controllers are listed but there is nothing listed underneath those. Are you saying to uninstall the Primary and Secondary controllers themselves, as there are no devices listed underneath them to uninstall? I'm running Windows 2000 if that helps.
Quote:
2. SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04FE5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Burner is not ready
If you have the time, could you explain this error in a bit more detail please?
Quote:
Do you have Roxio on your computer. If you do remove the drag to disc module as it causes massive problems w/ burning DVD's
I don't have Roxio on my computer, however I did install a MP3 player to my machine about two weeks ago which has a "drag and drop" feature as part of its software. The software is "MusicMatch Jukebox", and now that I've thought it over, it seems that my DVD burning problems started at about the same time I installed this program. Any knowledge of whether this program causes the same problems as the Roxio program you mentioned?
I appreciate your timely reply to my error log, and thanks again for any new imput you might have.
This message has been edited since posting. Last time this message was edited on 28. October 2005 @ 08:52
|
Senior Member
|
28. October 2005 @ 09:29 |
Link to this message
|
|
@JohnStark hi :)
in addition to what has been said above.
the burn speed is a tad high. the faster you burn the higher the chances of errors, i would suggest 4x max, and with those cmc 2.4x.
if you feel the new programme may be the problem , uninstall it and try again. if all is back to normal ok, if not you can always reinstall
 gif by ireland
we cant help if you wont help yourself This message has been edited since posting. Last time this message was edited on 28. October 2005 @ 09:30
|
AfterDawn Addict
|
28. October 2005 @ 10:34 |
Link to this message
|
You are getting a media error apparently after the first "Not Ready" error the process begain and some data was written. Can you see the burned area on the DVD that failed?:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
This is generally cured by using some better quality media. As stated earlier, just because the first few worked, it does not mean that the rest will.
Please notice that the burned failed after your burner tried for almost 25 minutes to complete a burn at 8X which usually takes less than 8 minutes.
Quote:
Last address to be written: 1874271
EndDAO: Last written address was 1185279
It looks like your burner wrote about 2/3 of the files before getting stuck on a bad section of the blank.
You should have been able to hear your burner struggling with this.
This message has been edited since posting. Last time this message was edited on 28. October 2005 @ 10:44
|
|
Car.Mike
AfterDawn Addict
|
28. October 2005 @ 14:35 |
Link to this message
|
JohnStark,
It has been years since I have used W-2000 but if I remember correctly the 2 HD's should be on the Primary IDE Channel and the 2 cd-dvdroms should be listed under the Secondary IDE Channel.
In the next one the burner was not ready as the command was sent but the computer just did not comply. It did eventually though. It could be that the cable is loose or there is a possible short as it corrected itself later.
If the MusicMatch Jukebox program has a drag and drop I would dump the program as the program might be trying to access the DVD drive . You can uninstall the Drag and Drop feature in Roxio and in Nero so I would check that out first
|
|
Advertisement
|
|
|
|
JohnStark
Newbie
|
16. December 2005 @ 19:09 |
Link to this message
|
|
Hey guys, I forgot to get back to this thread. I bought new media (Verbatim) and it cleared up my problem completely. Its amazing that other dvds are of such poor quality that half a stack of them are simply duds.
Thanks for the advice on the Verbatim discs, and for everyone taking the time to reply.
Merry Christmas!
|
|
