|
|
|
Burn failed, disc-at-once errors
|
|
|
Wrhamster
Newbie
|
30. October 2005 @ 01:27 |
Link to this message
|
|
Hi there. Hope you guys can help me out.
Here's the story. I picked up an LG 4163B internal DVD burner which came with Nero Express about 6 months back. Since then I've been able to burn a couple of DVD-RW data discs, burned some old VHS home movies into DVD using DVD+R, even burned my sister-in-law's wedding vid from my video camera onto a cheap generic DVD-R that cost 12 cents...not a single problem.
Then I tried to re-burn an CD-RW, but Nero or the LG identified it as as a CD-ROM, not RW. Brand new CD-RWs, it identifies correctly. Anyway, an IT friend of mine suggested I upgrade my Nero and my firmware, which I did.
Now, I can't burn anything. I keep getting DISC-AT-ONCE errors. I been trying to figure this out for the past two weeks, but I can't.
Here's my specs. I'm running Windows XP Professional SP2. I've got an Intel Pentium 4 2.4 Ghz with 512MB RAM.
Here's the logfile from trying to burn a DVD-RW
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/Oct/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.1 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <IdeChnDr> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F030J0 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 IdeChnDr Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
SONY DVD-ROM DDU1621 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 302MB (309620kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.10.2005
ISO compilation
15:32:20 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
15:32:21 #2 Text 0 File Reader.cpp, Line 127
Reader running
15:32:21 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
15:32:21 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
15:32:23 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 552159 (122:42.09, 1078MB)
15:32:23 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
15:32:23 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-RW
Disc Manufacturer: CMCW02 -
Disc Application Code: 64, Disc Physical Code: 214
15:32:23 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:32:23 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 552160 (552160) = #552160/122:42.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 552160 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
15:32:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1130823680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
552160 | lead-out | 1 | 0x41 | 0x00
15:32:23 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
15:32:24 #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
15:32:24 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
15:32:24 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
15:32:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:32:24 #16 Text 0 File DVDMinusRW.cpp, Line 269
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
15:32:24 #17 Phase 136 File dlgbrnst.cpp, Line 1832
Quick Format DVD-RW
15:33:12 #18 CDR -1093 File ThreadedTransferInterface.cpp, Line 1771
No seek complete
15:33:12 #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
Could not perform start of Disc-at-once
15:33:12 #20 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 21/Dec/2004 02:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/Oct/2002 00:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Here's the one when trying to burn a DVD-R
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/Oct/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.1 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <IdeChnDr> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F030J0 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 IdeChnDr Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
SONY DVD-ROM DDU1621 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 174MB (178600kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.10.2005
UDF/ISO compilation
16:50:18 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
16:50:18 #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
16:50:18 #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
16:50:18 #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
16:50:18 #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
16:50:18 #6 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.IFO has been modified
16:50:18 #7 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.BUP has been modified
16:50:18 #8 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_03_0.IFO has been modified
16:50:18 #9 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_03_0.BUP has been modified
16:50:18 #10 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_04_0.IFO has been modified
16:50:18 #11 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_04_0.BUP has been modified
16:50:18 #12 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
16:50:18 #13 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
16:50:18 #14 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
16:50:18 #15 Text 0 File Reader.cpp, Line 127
Reader running
16:50:18 #16 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
16:50:18 #17 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:50:18 #18 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:50:18 #19 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
16:50:19 #20 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1142687 (253:55.62, 2231MB)
16:50:19 #21 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
16:50:19 #22 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: NANYA- - JC001
Disc Application Code: 64, Disc Physical Code: 193
16:50:19 #23 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:50:19 #24 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1142688 (1142688) = #1142688/253:55.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1142688 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
16:50:19 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2340225024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1142688 | lead-out | 1 | 0x41 | 0x00
16:50:19 #26 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
16:50:19 #27 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
16:50:19 #28 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
16:50:19 #29 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
16:50:19 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:51:42 #31 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1142688 (116FA0h), lenght 0 blocks
16:51:42 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:51:42 #33 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 20.3x (28,126 KB/s)
16:51:42 #34 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
16:51:43 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:51:43 #36 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
16:51:43 #37 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
16:51:43 #38 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
16:51:43 #39 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:58:47 #40 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1142688 (116FA0h), lenght 0 blocks
16:58:47 #41 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:58:47 #42 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1142687
16:58:49 #43 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
16:58:51 #44 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
16:58:52 #45 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
16:58:52 #46 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:58:52 #47 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
16:58:52 #48 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
16:58:52 #49 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
16:58:52 #50 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:59:04 #51 SCSI -1039 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B4F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x00 0x0C 0x09 0x01
16:59:04 #52 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error
16:59:05 #53 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:59:05 #54 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16:59:05 #55 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 991
16:59:05 #56 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
16:59:21 #57 SCSI -1093 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x37 0x20 0x00 0x0C 0x02 0x00
16:59:21 #58 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x5B 0x01 0x00 0x0C 0x72 0x04
16:59:21 #59 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
HL-DT-ST DVDRAM GSA-4163B\H1 T0
16:59:21 #60 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
16:59:21 #61 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 21/Dec/2004 02:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/Oct/2002 00:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks in advance.
|
|
Advertisement
|
|
|
|
Moderator
|
30. October 2005 @ 02:23 |
Link to this message
|
Quote:
DiskPeripheral : Maxtor 2F030J0 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 IdeChnDr Port 1 ID 1 DMA: Off
- DMA needs to be ON. Can you try and uninstall Intel Application Accelerator as 'IdeChnDr' are the drivers for the pesky Intel Application Accelerator, and all i seem to see about that is people recommended to ditch the blessed thing.
Quote:
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: NANYA- - JC001
Disc Application Code: 64, Disc Physical Code: 193
- erm those discs don't sound very good quality. try decent media
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
- see previous comment
Quote:
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 15/Oct/2002 00:00:00 (Adapter driver for rec)
- see first comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Wrhamster
Newbie
|
30. October 2005 @ 18:22 |
Link to this message
|
|
Hi,
Sorry for the late reply, had to go mind the baby.
Ok, thanks. Will try that. I think I got a box of Verbatim DVD-Rs around here somewhere. Funny though, never had problems with these generic DVDs before.
Thanks again.
WH
|
AfterDawn Addict
|
30. October 2005 @ 19:03 |
Link to this message
|
You're in good hand with Creaky now. In addition to what Creaky had mentioned, you need to a few more tweaking.
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F030J0 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 IdeChnDr Port 1 ID 1 DMA: Off
2 DMA drivers is Off, you need to get/turn them back to On. Try the following guide to troubleshoot and see if it'll resolved the issues.
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
**NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of IDE ATA/ATAPI Controllers
(B) double left click on either Primary or Secondary IDE Channel
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
**NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel. Usually it's the "Secondary IDE Channel"because your "C: drive or Hard Drive" would be the "Main aka Primary IDE Channel already". If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
**NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either Primary or Secondary (usually it's the Secondary Channel)<--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
Quote:
15:32:23 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 552159 (122:42.09, 1078MB)
Hummhhh... what's going on here? This doesn't look good -- it should at least be like 4300MB or 4400MB (at the max with high quality media).
Quote:
Media type: DVD-RW
Disc Manufacturer: CMCW02
I despise Memorex aka CMC MAG and its media. Even if you're using a Rewritable media, it's always good and recommend to use high quality media such as Taiyo Yuden, Verbatim and Maxell (Made In japan). My suggestion is don't use Memorex anymore.
Quote:
15:33:12 #20 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Try to burn at 4X. Again, your dvd burner probably doesn't like the media you're using. So get other high quality media (see above reply) for your next dvd burning project.
|
|
Wrhamster
Newbie
|
30. October 2005 @ 22:00 |
Link to this message
|
Hi Creaky, Alkohol,
Ok. I uninstalled Intel ATA as recommended and used Nero's Control DMA Mode to turn on all the DMAs.
Tried burning using a Verbatim DVD-R. Didn't work, either. But I got a different error message this time.
Here's the logfile, could you guys have a look? Oh, and thanks again.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/Oct/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.1 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F030J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
SONY DVD-ROM DDU1621 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 244MB (250248kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.10.2005
UDF/ISO compilation
11:26:40 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:26:40 #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
11:26:40 #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
11:26:40 #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
11:26:40 #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
11:26:40 #6 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.IFO has been modified
11:26:40 #7 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.BUP has been modified
11:26:40 #8 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_03_0.IFO has been modified
11:26:40 #9 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_03_0.BUP has been modified
11:26:40 #10 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_04_0.IFO has been modified
11:26:40 #11 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_04_0.BUP has been modified
11:26:40 #12 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
11:26:40 #13 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:26:40 #14 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:26:40 #15 Text 0 File Reader.cpp, Line 127
Reader running
11:26:40 #16 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
11:26:40 #17 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:26:40 #18 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:26:40 #19 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:26:40 #20 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1142687 (253:55.62, 2231MB)
11:26:40 #21 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:26:40 #22 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:26:40 #23 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:26:40 #24 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1142688 (1142688) = #1142688/253:55.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1142688 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
11:26:40 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2340225024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1142688 | lead-out | 1 | 0x41 | 0x00
11:26:40 #26 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:26:41 #27 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
11:26:41 #28 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:26:41 #29 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
11:26:41 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:26:41 #31 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
11:26:41 #32 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
11:26:41 #33 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
11:26:41 #34 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:27:04 #35 Text 0 File Cdrdrv.cpp, Line 1286
11:27:04.187 - HL-DT-ST DVDRAM GSA-4163B\H1 T0 : Queue again later
11:27:30 #36 SCSI -1093 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B3C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x36 0x30 0x00 0x0C 0x02 0x00
11:27:30 #37 CDR -1093 File Writer.cpp, Line 311
No seek complete
11:27:30 #38 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:27:30 #39 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:27:30 #40 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1
11:27:32 #41 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 21/Dec/2004 02:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/Aug/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
30. October 2005 @ 22:31 |
Link to this message
|
|
hmmm, all settings look correct in the log now, try 4x maybe. one of my drives won't do 8x on certain Verbatim media but i get an error at the lead-in stage everytime (different error to you though). but when i do 4x it's fine. wierd. try that and this time do a 'simulation burn' - when you go to hit 'burn', untick burn and tick simulation. this will go theu the motions with a blank disc but won't write to the disc and will provide another section of log
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
30. October 2005 @ 23:27 |
Link to this message
|
@Wrhamster
Your log looks clean this time. I didn't see anything wrong with it. However, it looks like it didn't like the media that's all. My only suggestion is to try another 8X DVD+R Taiyo Yuden or Verbatim and burn at 4X. Other than that your log looks good. Below is a reference from your log:
Quote:
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00
This message has been edited since posting. Last time this message was edited on 30. October 2005 @ 23:28
|
|
MMethven
Newbie
|
31. October 2005 @ 00:02 |
Link to this message
|
Hi. I also have a problem with DMA. I was going to post a screen shot but I can't figure out how to do it. I followed this
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
**NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of IDE ATA/ATAPI Controllers
(B) double left click on either Primary or Secondary IDE Channel
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
**NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel. Usually it's the "Secondary IDE Channel"because your "C: drive or Hard Drive" would be the "Main aka Primary IDE Channel already". If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
**NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either Primary or Secondary (usually it's the Secondary Channel)<--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
and come up with the following problem.
Primary IDE Channel
Master:MAXTOR 6L080J4
DMA off
Secondary IDE Channel
Master:SAMSUNG CDRW/DVD SM-308B
DMA on
Autorun on
Slave:DVDRW DRW-2S81
DMA on
Autorun on
I have tried to change my harddrive to DMA but it will only stay in PIO Mode. Another problem is that I can't make a copy of a DVD disk I'm told that the disk I'm using is not large enough, but the disk is large enough.
Any help would be greatly appreciated
Thanks MMethven
|
AfterDawn Addict
|
31. October 2005 @ 00:29 |
Link to this message
|
@MMethven
Well, did you "uninstall" your dvd burner's driver by a chance? And if you failed to do that, did you uninstall it's driver from IDE ATA Channel? Once you uninstall any of the above, you should "restart" your computer right away, then upon restart, Windows should automatically reinstall your driver back. Now if you check your DMA, it should reverse back to DMA if available.
Quote:
Primary IDE Channel
Master:MAXTOR 6L080J4
DMA off
Well, it looks like your MAXTOR burner is on Primary IDE Channel, so you're going to have "uninstall" that one. Then restart your computer, once restart, you should be all set. Give it a shot now.
This message has been edited since posting. Last time this message was edited on 31. October 2005 @ 00:32
|
|
MMethven
Newbie
|
31. October 2005 @ 12:04 |
Link to this message
|
|
@Alkohol
I followed your instructions and my hard drive is now back to DMA mode.
Thanks MMethven
|
|
Wrhamster
Newbie
|
1. November 2005 @ 21:08 |
Link to this message
|
|
Hi guys,
I tried simulating and it worked fine, but when I tried to burn for real, I got the same error. I tried burning at 4x as well, but got the same results.
Anyway, Creaky, Alkohol, thanks for the help, if the log looks good then there's not much else you can do unless you'd like to fly down here and give it a look. hehe )
People told me that LG was a little picky about the discs it burns, but if it didn't burn everything I threw at it the first six months I would've believed them. Oh, well. I'm gonna give up on it for now, I'll try and figure out what's wrong when I have more time.
Right now, I got a stack of MiniDVs full of baby videos that my folks are demanding be turned into DVDs and all I have is a stack of burn-failed discs, so I'm just gonna throw some hard-earned cash at the problem and get myself a LiteOn, like my techie friends here are recommending.
Thanks again for the time and effort, its very much appreciated.
WH
This message has been edited since posting. Last time this message was edited on 1. November 2005 @ 21:09
|
Moderator
|
1. November 2005 @ 21:16 |
Link to this message
|
|
ah well, at least you've gone thru all the basics, a new burner is always a good step once the settings have been sorted; not trying to put you off because a lot of ppl out there are happy with Lite-on, just a heads up - if you buy a 1693S (which i think is their latest model) - don't forget to update the thread, as i've been stung by 2 faulty 1693S's recently and a few ppl round here have too. However we're the minority but it does seem there are bad batches out there..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 1. November 2005 @ 21:17
|
|
Advertisement
|
|
|
|
Wrhamster
Newbie
|
2. November 2005 @ 21:35 |
Link to this message
|
|
Model 1693S. Ok, will watch out for it. Will let you know how things turn out. ;)
WH
|
|
