|
Things you need:
1. Crossover Cable (Different then an RJ-45 Cable, be careful.)
2. Computer relatively close to your xbox
3. Zone Alarm PRO and Commview (not exactly where to download there are links for commview all over the site and members have Zone Alarm Pro..)
Ok so im guessing that you already have a router.. Your setup(after you buy the crossover cable) should be like this.
Modem --> Router --> Computer --> Crossover Cable (from your computer not your router!) --> Xbox
If your running windows xp all you have to do is go to
Control Panel --> Network Connections then you should have 2 connections under LAN or High Speed, highlight them with your mouse and hit 'Bridge Connections'
Voila now you have bridge your connections
Now you have to sign onto xbox live and you have to get bungies ip.. This can be a little bit tricky as bungie is always frequently adding new ips to there servers. Make sure you know what ips were in Commview BEFORE you sign into Xbox live, Otherwise you wont know which ips are bungies. *Note* There are alot more IPs then one and you have to constantly keep updating otherwise when you go into matckmaking you will lagout.
Now that you have the IPs add them to the Trusted list in Zone Alarm Pro. Block all of the other ips.
Some of bungies Ips are:
65.59.234.161
65.59.232.25
65.59.232.6
207.46.246.6
207.46.246.254
65.59.234.163
65.59.234.162
(Thanks to xSiPx for these)
I'll tell you the rest on AIM or Xbox Live
GT = C0ldf1r3
Aim = enjOi desiGn
I'll be on aim tonight and XBL tommrow and Sunday.
-- GT = C0ldf1r3 --
Looking for standbyers or bridgers!
|
