|
|
|
only able to write at 1 speed?
|
|
|
trickyd
Newbie
|
10. November 2005 @ 13:02 |
Link to this message
|
|
Allo people,
Have this problem where using the same software and same media as I had burned at 4 speed previously, I am only age to burn at 1 speed now.
Software - Nero 6.6.0.3 (dvd shrink is used to rip the files but have tired with nero only and same issue.)
drive - Pioneer 105
Media - Rivision DVD-R 4X 4.7GB 120 min
Opperating system - Xp Sp 2 (All up to date.)
AV - AVG free edition.
When I try to burn at the higher speed I get the error below. Could anyone help me out please?
"Richard
a
*** serial numbers edited out ***
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-105 D: CDRom0
HL-DT-ST DVD-ROM GDR8163 F: CDRom1
FvF-Inc CDDVD-2003-200x G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 228MB (234096kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
UDF/ISO compilation
22:30:56 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
22:30:56 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
22:30:56 #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:30:56 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
22:30:57 #5 Text 0 File Reader.cpp, Line 127
Reader running
22:30:57 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
22:30:57 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
22:30:57 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
22:30:57 #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
22:30:57 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285929 (507:59.04, 4464MB)
22:30:57 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD DVD)
22:30:57 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
22:30:57 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:30:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
22:30:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386924544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286080 | lead-out | 1 | 0x41 | 0x00
22:30:57 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:30:57 #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
22:30:57 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:30:57 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
22:30:57 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:30:57 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode
22:30:57 #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON
22:30:57 #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes
22:30:57 #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:30:59 #25 Text 0 File Cdrdrv.cpp, Line 1282
22:30:59.390 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later
22:31:06 #26 SCSI -1061 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x18 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
22:31:06 #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
22:31:06 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:31:07 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
22:31:07 #30 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 767
22:31:07 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) "
virtute duce comite fortuna
This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 13:48
|
|
Advertisement
|
 |
|
|
|
trickyd
Newbie
|
10. November 2005 @ 13:47 |
Link to this message
|
|
Hey,
Update.
Burned a disk at 1 speed and the disk says it is written on but has used 0 space and has nothing on it.
Also I tested out burning a CD-r... this worked fine (Just burned a backup for my college work... not much like 50 Megs.)
So... DVD writing failed but cd writing working fine.
virtute duce comite fortuna
|
|
trickyd
Newbie
|
10. November 2005 @ 13:56 |
Link to this message
|
|
Went to the pioneer site and found latest drivers was going to overwrite the autoexec.bat etc but before it could complete came up with following error
______________________< ERROR >_______________________
| |
| There is no MSCDEX.EXE. |
| Copy it to the boot drive from the DOS disk. |
______________< Quit for ERROR >______________
| |
| Exit for error. |
| If you have confirmed, press the SPACE key. |
|______________________________________________|
Searched my PC and no such file around. What do I do from here?
virtute duce comite fortuna
|
Senior Member
|
10. November 2005 @ 17:40 |
Link to this message
|
Quote:
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.3
Your Nero is behind by a few versions. The current version is 6.6.0.16
Quote:
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off
Your DMA is off here is how you can turn it back on:
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of "IDE ATA/ATAPI Controllers"
(B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel")
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
Quote:
22:30:57 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285929 (507:59.04, 4464MB
You are writing too close to the edge, here is how you can fix that, I am assuming that you are using shrink:
In shrink got to Edit>Preference>in the first tab scroll down in box to 'custom'> then in the box beside it type in 4300.
Try that :D
|
AfterDawn Addict
|
10. November 2005 @ 20:28 |
Link to this message
|
@GlueEater
Yep, that was written by me. Anyways, I've updated with the fancy pictures now, so it'll be super easy to follow.
@trickyd
((To enable DMA back ON by "uninstalling" its driver ?for Win XP users? by alkohol))
Here are some helpful pictures for references.
A) on "DESKTOP" right click on "MY COMPUTER," left click on "PROPERTIES"
B) left click on "HARDWARE," left click on "DEVICE MANAGER"
C) left click on + sign of IDE ATA/ATAPI Controllers
D) double left click on either ?Primary? or ?Secondary IDE Channel?
E) left click on "DRIVER," left click on "UNINSTALL"
You will see a "Warning: you are about to uninstall this device from your system," just click "OK," now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
**NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "Uninstall" it from the ?DVD/CD-ROM Drives?
****at Device Manager****
(A) left click on + sign of DVD/CD-ROM Drives
(B) double left click on your DVD burner or your DVD-ROM drive
(C) click on "DRIVER," "UNINSTALL," "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 20:58
|
|
temj
Member
|
10. November 2005 @ 21:09 |
Link to this message
|
Great guide alkohol! 
|
|
trickyd
Newbie
|
11. November 2005 @ 10:00 |
Link to this message
|
Carried out the above... think the log is showing DMA is on now but the exact same problem. What else can I try>?
"Richard
a
***** edited out *****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-105 D: CDRom8
HL-DT-ST DVD-ROM GDR8163 F: CDRom1
FvF-Inc CDDVD-2003-200x G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 148MB (151968kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.11.2005
UDF/ISO compilation
19:57:28 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
19:57:29 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
19:57:29 #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:57:29 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
19:57:29 #5 Text 0 File Reader.cpp, Line 127
Reader running
19:57:29 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
19:57:29 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
19:57:29 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
19:57:29 #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
19:57:29 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285929 (507:59.04, 4464MB)
19:57:29 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD DVD)
19:57:29 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
19:57:29 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:57:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
19:57:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386924544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286080 | lead-out | 1 | 0x41 | 0x00
19:57:29 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:57:29 #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
19:57:29 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:57:29 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
19:57:29 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:57:29 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode
19:57:29 #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON
19:57:29 #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes
19:57:29 #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:57:31 #25 Text 0 File Cdrdrv.cpp, Line 1282
19:57:31.875 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later
19:57:41 #26 SCSI -1061 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02ED0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x19 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
19:57:41 #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
19:57:41 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:57:41 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
19:57:41 #30 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 767
19:57:41 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)"
virtute duce comite fortuna
|
Senior Member
|
11. November 2005 @ 11:18 |
Link to this message
|
|
@alkohol
Yeah that really is a great guide, I copied and pasted it from some other guy who posted it, I think it was MaxBurn. Kinda makes me seem lazy doesn't it. I can't even take the time to type out my own response and you take the time to put pictures in and improve it. lol
This message has been edited since posting. Last time this message was edited on 11. November 2005 @ 13:22
|
|
trickyd
Newbie
|
11. November 2005 @ 13:20 |
Link to this message
|
I upgraded to Nero 7... tried to burn again. Same issue.
Latest error log I have added below. Any ideas?
"Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-105 D: CDRom0
HL-DT-ST DVD-ROM GDR8163B F: CDRom1
FvF-Inc CDDVD-2003-200x G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 241MB (247580kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.11.2005
UDF/ISO compilation
23:18:38 #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
23:18:38 #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
23:18:38 #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
23:18:38 #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
23:18:38 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
23:18:38 #6 Text 0 File Reader.cpp, Line 124
Reader running
23:18:38 #7 Text 0 File Writer.cpp, Line 113
Writer D: PIONEER DVD-RW DVR-105 running
23:18:38 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
23:18:38 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
23:18:38 #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
23:18:38 #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286079 (508:01.04, 4464MB)
23:18:38 #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)
23:18:38 #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
23:18:38 #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:18:38 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [D: PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
23:18:38 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681891840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286080 | lead-out | 1 | 0x41 | 0x00
23:18:38 #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
23:18:38 #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
23:18:38 #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
23:18:38 #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
23:18:38 #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
23:18:38 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
23:18:38 #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
23:18:38 #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
23:18:38 #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
23:18:38 #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
23:18:41 #27 Text 0 File Cdrdrv.cpp, Line 1197
23:18:41.421 - D: PIONEER DVD-RW DVR-105 : Queue again later
23:18:48 #28 SPTI -1061 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 04 00 02 F3 18 0E 00 00 00 00 44 D9
Buffer x0a5e0000: Len x10000
0x00 00 01 BA 44 00 66 C0 5D 09 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 37 CE 1A 35 2E C9 6B 18 DF
0xDB 40 0A 00 1E 88 04 00 50 04 00 2E 04 00 42 00
23:18:48 #29 CDR -1061 File Writer.cpp, Line 302
Internal target failure
D: PIONEER DVD-RW DVR-105
23:18:48 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:18:48 #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
23:18:48 #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 767
23:18:48 #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) "
virtute duce comite fortuna
|
|
temj
Member
|
12. November 2005 @ 05:06 |
Link to this message
|
Quote:
"Sense Key: 0x04 (KEY_HARDWARE_ERROR) "
KEY_HARDWARE_ERROR indicates that the target detected a non-recoverable hardware failure while performing the command or during a self test.
Think your burner might be on its way out.
|
Moderator
|
13. November 2005 @ 06:33 |
Link to this message
|
Quote:
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33
- burner's firmware is up to date
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- as your burner is internal to the PC, that question mark is saying your ATAPI drivers still aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off
- DMA needs to be ON, it will be fixed via following the above link
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286079 (508:01.04, 4464MB)
- 4464MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Existing drivers:
- the ATAPI drivers are supposed to be listed in this section, this will be sorted by following the DMA fix above
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Senior Member
|
13. November 2005 @ 07:43 |
Link to this message
|
Hello all, Trickyd I had the same prob awhile back and it had me baffled for ages. Turned out what I had to do was uninstall Nero from the add and remove programmes and then do a search on my pc, just type in Nero. And then delete everything that comes up in your serch under Nero. Then re-install Nero, and hopefully you get no error.
|
|
trickyd
Newbie
|
25. November 2005 @ 15:06 |
Link to this message
|
Righty,
ATAPI drivers are not updated....
DMA is showing as on for the writer...
Have uninstalled Nero, searched PC and removed everything to do with Nero... reinstalled Nero 6 Ultra edition.
Now I still get errors... Going to try a new drive next. Anything else I can do?
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-105 D: CDRom0
HL-DT-ST DVD-ROM GDR8163 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 170MB (174712kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.11.2005
UDF/ISO compilation
01:00:02 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
01:00:02 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
01:00:02 #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
01:00:02 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
01:00:02 #5 Text 0 File Reader.cpp, Line 127
Reader running
01:00:02 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
01:00:02 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
01:00:02 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
01:00:02 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
01:00:02 #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286079 (508:01.04, 4464MB)
01:00:02 #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
01:00:02 #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
01:00:02 #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:00:02 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
01:00:03 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681891840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286080 | lead-out | 1 | 0x41 | 0x00
01:00:03 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
01:00:03 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
01:00:03 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
01:00:03 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
01:00:03 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:00:03 #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
01:00:03 #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
01:00:03 #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
01:00:03 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01:00:04 #25 Text 0 File Cdrdrv.cpp, Line 1287
01:00:04.984 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later
01:00:12 #26 SCSI -1061 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02CC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x19 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
01:00:12 #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
01:00:12 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
01:00:12 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
01:00:13 #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 767
01:00:13 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
virtute duce comite fortuna
|
Senior Member
|
25. November 2005 @ 16:01 |
Link to this message
|
Well you still haven't updated your Nero, and now it's 6.6.0.18. And you are still writing too close to the edge. And you didn't do what Alkohol and I told you to do about that DMA. Why did you only turn on the DMA for your writer but not your other drive, the LG one.
|
|
trickyd
Newbie
|
26. November 2005 @ 06:37 |
Link to this message
|
Quite right, I didn't update my Nero... I actually uninstalled it, removed all traces of it... and installed it again.
It worked fine before so no reason to say why it would not work better now. Also, I tried to upgrade to the new version with much problems actually, I have spent the time from when I last posted until now fixing the mess that caused... So, I will be staying away from later versions of Nero for the time being.
Only turned on the DMA for the Pioneer one as it is the only one involved, I saw little point in turning on DMA on a seccondary drive which had absolutely nothing to do with the process, but then I will do that if you think it will make a difference.
Yeah, with the burning too close to the edge... fair comment. I was just trying to burn an image I previously used DVD Shrink to backup which I no longer have in my possession... but I will try another backup with the changes above.
I really appreciate your help like guys and didn't mean to upset you, I know I am running on goodwill here and the last thing I want is to P you off.
virtute duce comite fortuna
|
Senior Member
|
26. November 2005 @ 08:35 |
Link to this message
|
|
I see your point in only changing your Pioneer's DMA but aren't you using the other drive to rip the movie? This will make your rip time decrese so why not?
|
|
trickyd
Newbie
|
26. November 2005 @ 08:58 |
Link to this message
|
The DVD rom is a very recent addition to my PC to be honest. Before now I always used the one drive. I had bought the drive a wee while back but never installed it until recently.
Ok, so this time I have done everything as above... I even did risk updating Nero and thankfully all went ahead fine.
I used the new sony drive to rip things and also decreased the amount of the disk that Nero was to write too. Unfortunately, still an error.
I am going to leand another dvdr drive from a mate of mine, is there anything else I could realistically try before hand?
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-105 D: CDRom0
HL-DT-ST DVD-ROM GDR8163B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 153MB (156996kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.11.2005
UDF/ISO compilation
18:55:26 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
18:55:26 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
18:55:26 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:55:26 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
18:55:26 #5 Text 0 File Reader.cpp, Line 127
Reader running
18:55:26 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
18:55:26 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:55:26 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:55:26 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:55:27 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
18:55:27 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
18:55:27 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
18:55:27 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:55:27 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
18:55:27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202144 | lead-out | 1 | 0x41 | 0x00
18:55:27 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:55:27 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
18:55:27 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:55:27 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
18:55:27 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:55:27 #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
18:55:27 #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
18:55:27 #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
18:55:27 #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:55:29 #25 Text 0 File Cdrdrv.cpp, Line 1288
18:55:29.046 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later
18:55:36 #26 SCSI -1061 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04520000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x18 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
18:55:36 #27 CDR -1061 File Writer.cpp, Line 311
Internal target failure
18:55:36 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:55:37 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
18:55:37 #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 767
18:55:37 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
virtute duce comite fortuna
|
Senior Member
|
26. November 2005 @ 09:23 |
Link to this message
|
|
I honestly don't know why you would want to burn above 4x but w/e. read temj's post, that might be it.
|
|
Advertisement
|
|
|
|
trickyd
Newbie
|
26. November 2005 @ 09:27 |
Link to this message
|
|
Above 4x?
Yeah, starting to think that hence setting up an exchange with my mate for a dvdr drive.
Och well, I'll try it and let you know how I get on.
virtute duce comite fortuna
|
|
