|
|
|
help! why on earth is this happening???
|
|
|
Tweeners
Newbie
|
14. November 2005 @ 16:40 |
Link to this message
|
|
hi guys,
been reading awhile, but this is my first post (yay!).
problem:
when burning .nrg files (music stuff, mainly) lately, the burn seems to work perfectly -- even says "burned successfully" or whatever -- but on the CD. . .nothing. they are reading blank. and yet, it will not let me record them again (cd-r), and also when one of them is IN nero and you hit "disc info", it shows that something is there. is there a simple reason for this? it's now happening on my new computer AND my old computer, though i've never had this problem before. i just wasted 30 cds on it! all blank. : (
i'm hoping that the info is there, there's just something simple i have to do in order to get the computer (either one) to recognize the data therein.
thoughts?
and thank you!
T
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
15. November 2005 @ 06:17 |
Link to this message
|
|
Maybe you could post a log?
|
|
gear79
Suspended permanently
|
15. November 2005 @ 07:44 |
Link to this message
|
|
i think maybe you have the settings set to 'simulation' burn and not 'write' like it is supposed to be.
go to tools, drop down menu, then check your setting, see if its in 'simulation' if it is, the select 'write' and problem solved.
but yes, post a log, just edit out your serial #.
1rst. sig compiled by phantom69 |
|
Tweeners
Newbie
|
15. November 2005 @ 07:53 |
Link to this message
|
hi guys and thanks. sorry i didn't post the log; i figured perhaps someone had this exact problem, and i wouldn't clutter a thread (as if!) with long ol' log file, if not necessary. my bad.
so i'm using 6.3.1.6 (i've gotten used to it), and i don't see where there is a general tools heading, nor where i can find a place to set it in write, rather than simulation. i've been burning consistently (for years) with Nero express; however, when i do occasionally switch to Nero, as i have the last couple of days (thinking there's perhaps something wrong with the express module), it does indeed say determine maximum speed/simulation/write (check boxes) on the burn tab of the new compilation window. that's the only place i see it, can't find a general spot for setting global write/simulation. i've had it on 'write' however : )
here's the logfile (hope i don't screw this up, i've seen how mean & nasty you guys can be ; )
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6 (Nero Express)
Recorder: <PHILIPS DVD+-RW DVD8701> Version: 5D24 - HA 0 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <PHILIPS DVD+-RW DVD8701 >Version: 5D24 - HA 0 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+-RW DVD8701 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160M0 iaStor Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVD+-RW DVD8701 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 15 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.11.2005
CD Image
2:53:51 PM #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated
2:53:51 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
2:53:51 PM #3 Text 0 File Writer.cpp, Line 124
Writer PHILIPS DVD+-RW DVD8701 running
2:53:51 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 682192896
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=73:59.27 ( 332952)
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <S:\vocal planet\Vocal_Planet_World_Voices_CD5.nrg>
2:53:51 PM #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media
2:53:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 332951 ( 74:01.26)
2:53:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
2:53:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: PHILIPS DVD+-RW DVD8701;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 40 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
2:53:52 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:53:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1)
2 indices, index0 (150) provided
original disc pos #0 + 332952 (332952) = #332952/73:59.27
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 0x4, wanted index0 0 blocks, length 332952 blocks [PHILIPS DVD+-RW DVD8701 ]
--------------------------------------------------------------
2:53:52 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [PHILIPS DVD+-RW DVD8701 ] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 815433696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
332952 | lead-out | 1 | 0x00 | 0x41
2:53:52 PM #12 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
2:53:52 PM #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
2:53:52 PM #14 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
2:53:52 PM #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 40x (6,000 KB/s)
2:53:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:53:52 PM #17 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off
2:53:52 PM #18 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON
2:56:54 PM #19 Text 0 File WriterStatus.cpp, Line 115
<PHILIPS DVD+-RW DVD8701 > start writing Lead-Out at LBA 332952 (51498h), lenght 6750 blocks
2:57:00 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:57:01 PM #21 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 40x (6,000 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Tweeners
Newbie
|
15. November 2005 @ 07:57 |
Link to this message
|
|
and quickly:
i saw that the last maxtor dma is "off", but that shouldn't have anything to do with it, right? that is obviously a hdd (250gb). however, the same thing is happening on BOTH of my computers, which leads me to believe there's some sort of header thing happening, or something.
just wanted you to know that i did see that : )
T
|
|
gear79
Suspended permanently
|
15. November 2005 @ 08:18 |
Link to this message
|
i'm broken hearted......
Quote:
here's the logfile (hope i don't screw this up, i've seen how mean & nasty you guys can be
i did however see this...
Quote:
Burn process completed successfully at 40x (6,000 KB/s)
slow it down a tad, like around 10x, i do all my audio cd's that way, never at max.
Quote:
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 1 DMA: Off
go ahead and switch to 'on' anyway.
what media did you use?
i am at work, but from memory, in your tools tab, i thinks its labeled 'options'
your burn settings are there. just double check to see if its not in 'simulation' mode.
other then that, i will forward this to creaky, he is the pro in log files...
1rst. sig compiled by phantom69
|
|
Tweeners
Newbie
|
15. November 2005 @ 08:19 |
Link to this message
|
|
oops! one more thing: out of 30 cds i made (coasters?), ONE of them actually worked, and loaded onto the new computer. it was burned on the old computer, though a bunch of others burned on the same computer did NOT work (meaning the same 'blank' reading was occurring on BOTH machines!).
here is the logfile for the one that DID work. . .i can't find the difference! thanks!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 09/10/1999 1:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6 (Nero Express)
Recorder: <SONY CD-RW CRX230E> Version: QYS1 - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY CD-RW CRX230E >Version: QYS1 - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD300BB-32AUA1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 2 ID 0 DMA: On
DiskPeripheral : IBM-DPTA-371360 atapi Port 2 ID 1 DMA: On
=== CDRom-Device-Map ===
ELBY DVD-ROM CDRom1
SONY CD-RW CRX230E D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 279MB (285944kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.11.2005
CD Image
3:58:27 PM #1 Phase 96 File dlgbrnst.cpp, Line 1841
Buffer underrun error protection activated
3:58:27 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
3:58:27 PM #3 Text 0 File Writer.cpp, Line 124
Writer SONY CD-RW CRX230E running
3:58:27 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x20
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE2_FORM1_NOSUB'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 263165952
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=28:31.24 ( 128349)
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\audio\Desktop\Sonic Implants - Afro-Cuban Percussions.nrg>
3:58:27 PM #5 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media
3:58:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 128348 ( 28:33.23)
3:58:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
3:58:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: SONY CD-RW CRX230E;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
3:58:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:58:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (1 - CD-ROM Mode 2/XA, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 128349 (128349) = #128349/28:31.24
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 128349 blocks [SONY CD-RW CRX230E ]
--------------------------------------------------------------
3:58:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [SONY CD-RW CRX230E ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 302229648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
128349 | lead-out | 1 | 0x00 | 0x41
3:58:28 PM #12 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started
3:58:28 PM #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.
3:58:28 PM #14 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed
3:58:28 PM #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 8x (1,200 KB/s)
3:58:28 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:58:28 PM #17 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off
3:58:28 PM #18 Text 0 File Mmc.cpp, Line 19864
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
3:58:28 PM #19 Text 0 File Mmc.cpp, Line 15555
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 1c 21 18
4:02:30 PM #20 Text 0 File WriterStatus.cpp, Line 115
<SONY CD-RW CRX230E > start writing Lead-Out at LBA 128349 (1F55Dh), lenght 0 blocks
4:02:43 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:02:43 PM #22 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 8x (1,200 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2002 11:00:34 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 08/23/2001 12:00:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Tweeners
Newbie
|
15. November 2005 @ 08:24 |
Link to this message
|
thank you, gear79; i was posting while you were, sorry : )
yeah, i don't see ANY 'tools' tab anywhere, at least not in this version. there's a 'configure' button (in express) and then 'preferences' in Nero, but even there, no 'tools'. and nothing that gives the option for a global write/simulation.
and also: i DID write it at 8x (or 16x). did that on ALL of them, and yet EVERY logfile says "completed at 40x". don't know why that is. believe me, i'm fearful (always) of burning at the max (which is 48x and 52x for the two machines).
thanks!
T
|
|
Tweeners
Newbie
|
15. November 2005 @ 08:27 |
Link to this message
|
|
man, i swear i burned it more slowly. regardless, honestly, this had to be the only one that burned at the high speed; i consistenly burned them at 8x (or 16x, on a few); i think this may have been one i just wanted to "check real quick" so i burned it quickly. not certain. i do know that even the slow ones did not work, since almost all of them (save for maybe this one! haha) were burned more slowly.
thanks, and i will indeed turn on the dma for the maxtor. the 'off' dma on the old machine (elby dvd-rom) is off because it simply does not exist. . .no dvd player on the old machine.
T
|
Moderator
|
15. November 2005 @ 08:51 |
Link to this message
|
Quote:
Nero version: 6.3.1.6 (Nero Express)
- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php - you may want to pick the version without the included Yahoo toolbar
Quote:
Recorder: <SONY CD-RW CRX230E> Version: QYS1
- firmware is out of date, QYS3 is here - http://sony.storagesupport.com/cdrw/firmware.htm#230
Quote:
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD300BB-32AUA1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 2 ID 0 DMA: On
DiskPeripheral : IBM-DPTA-371360 atapi Port 2 ID 1 DMA: On
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
- Can't remember what that ElbyVCD thing is...or if it needs removing to get DMA back on..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 08:52
|
|
Tweeners
Newbie
|
15. November 2005 @ 09:02 |
Link to this message
|
|
thank you mr. creaky!
thanks to both of you for trying to help, i really appreciate it.
i will try what you've suggested, burn a CD, and if there's a problem i will post the new logfile here.
thanks again, you guys rock.
T
|
|
gear79
Suspended permanently
|
15. November 2005 @ 09:07 |
Link to this message
|
|
yes, creaky is very knowledgeable, especially when it comes to nero's log files. thats why i sent him a PM requesting his presence to your concern. try what he says, see if it works.
1rst. sig compiled by phantom69
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 09:08
|
Moderator
|
15. November 2005 @ 09:14 |
Link to this message
|
|
no worries, i had subscribed to this thread earlier today but was stuck sorting out the heating 'til i saw gear79's PM.. hopefully the firmware will sort out the problem and dunno whether you need yto uninstall that ElbyVCD virtual drive thingy, i've come across that before but can't remember without googling.
i'm starting to ease off the Nero logs a bit round here as they never stop flooding in!, but still subscribe to all threads in the Nero forum so i can still see what's going on..and jump in where necessary
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 15. November 2005 @ 09:16
|
|
gear79
Suspended permanently
|
15. November 2005 @ 09:18 |
Link to this message
|
|
as always creaky, its a joy to see/find/read your help in the matter, and i am sure the newbies appreciate it, but us older members know that your a great hepl to aD. i for one can vouch for you and your knowledge.
1rst. sig compiled by phantom69
|
Moderator
|
15. November 2005 @ 09:23 |
Link to this message
|
|
(creaky blushes)
:)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Tweeners
Newbie
|
15. November 2005 @ 10:54 |
Link to this message
|
you guys are CRAZY!
but awesome. i have flashed the firmware, i'm just going to update Nero on the new machine (finished on the old one), and fixed the dma stuff. i'll try to burn a disc and see what it says (on both machines). . .i'll keep you posted.
and guys: thanks again! sincerely.
T
|
Moderator
|
15. November 2005 @ 10:55 |
Link to this message
|
|
no worries. just make sure to come back with good results :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
gear79
Suspended permanently
|
15. November 2005 @ 12:16 |
Link to this message
|
|
thanks......... and creaky always loves good results, he lives for them...
1rst. sig compiled by phantom69
|
|
Advertisement
|
|
|
|
Tweeners
Newbie
|
15. November 2005 @ 12:36 |
Link to this message
|
okay, you guys will be wondering what the heck on this one. even though i did the 'dma fixes', that part of the new logfiles hasn't changed. however, it is showing the newer version of Nero, and i also updated the firmware on the old machine. here are the logfiles. . .both of them created CDs that are blank (read blank in both machines), and even after it verified both burn processes (earlier it would not even give me the option to verify, but now it did. . .assuming that was a fix in the newer version of Nero express). i am totally at a loss. why on earth would they read blank?? the new computer is VERY new. i use it for music ONLY. the old machine is mostly for music, plus a bit of online stuff (like this!). this is getting ridiculous, i have a TON of great sounds that i'm trying to get into the new machine, all of them in .nrg format, and i can't burn a single one. DRAG!!
THIS WAS ON THE OLD MACHINE:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 09/10/1999 1:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY CD-RW CRX230E> Version: QYS3 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY CD-RW CRX230E >Version: QYS3 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD300BB-32AUA1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 2 ID 0 DMA: On
DiskPeripheral : IBM-DPTA-371360 atapi Port 2 ID 1 DMA: On
=== CDRom-Device-Map ===
ELBY DVD-ROM CDRom1
SONY CD-RW CRX230E D: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 207MB (212560kB)
Memory in use : 59
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.11.2005
CD Image
1:29:00 PM #1 Text 0 File Burncd.cpp, Line 2948
SONY CD-RW CRX230E
Buffer under-run error protection activated
1:29:00 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
1:29:00 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY CD-RW CRX230E running
1:29:00 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 527030272
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=57:09.14 ( 257189) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\audio\Desktop\07 - E-MU Classics.nrg>
1:29:00 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
1:29:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 257188 ( 57:11.13)
1:29:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:29:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY CD-RW CRX230E;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
1:29:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:29:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1)
2 indices, index0 (150) provided
original disc pos #0 + 257189 (257189) = #257189/57:9.14
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 257189 blocks [SONY CD-RW CRX230E]
--------------------------------------------------------------
1:29:00 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY CD-RW CRX230E] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 527030272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
257189 | lead-out | 1 | 0x41 | 0x00
1:29:00 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:29:01 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
1:29:01 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:29:01 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
1:29:01 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:29:01 PM #17 Text 0 File Mmc.cpp, Line 17024
StartDAO : CD-Text - Off
1:29:01 PM #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
1:29:01 PM #19 Text 0 File Mmc.cpp, Line 17311
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 39 0b 0e
1:44:02 PM #20 Text 0 File WriterStatus.cpp, Line 116
<SONY CD-RW CRX230E > start writing Lead-Out at LBA 257189 (3ECA5h), lenght 0 blocks
1:44:03 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:44:27 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
1:44:27 PM #23 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
1:44:30 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 257189 -> 257187.
1:46:38 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:46:39 PM #26 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2002 11:00:34 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 08/23/2001 12:00:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
AND THIS WAS ON THE NEW MACHINE:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <PHILIPS DVD+-RW DVD8701> Version: 5D24 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <PHILIPS DVD+-RW DVD8701 >Version: 5D24 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+-RW DVD8701 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160M0 iaStor Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVD+-RW DVD8701 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 14
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.11.2005
CD Image
2:07:31 PM #1 Text 0 File Burncd.cpp, Line 2948
PHILIPS DVD+-RW DVD8701
Buffer underrun protection activated
2:07:31 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
2:07:31 PM #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW DVD8701 running
2:07:31 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 527030272
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=57:09.14 ( 257189) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <S:\vitous symphonic orchestra\Miroslav Vitous Symphonic Orchestra Percussions and Harp (v1.0).nrg>
2:07:31 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
2:07:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 257188 ( 57:11.13)
2:07:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
2:07:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+-RW DVD8701;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
2:07:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:07:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1)
2 indices, index0 (150) provided
original disc pos #0 + 257189 (257189) = #257189/57:9.14
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 257189 blocks [PHILIPS DVD+-RW DVD8701]
--------------------------------------------------------------
2:07:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVD+-RW DVD8701] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 629965872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
257189 | lead-out | 1 | 0x41 | 0x00
2:07:32 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:07:32 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:07:32 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:07:32 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (1,800 KB/s)
2:07:32 PM #16 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03D56000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x30 0x02
2:07:32 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:07:32 PM #18 Text 0 File Mmc.cpp, Line 17024
StartDAO : CD-Text - Off
2:07:32 PM #19 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
2:12:40 PM #20 Text 0 File WriterStatus.cpp, Line 116
<PHILIPS DVD+-RW DVD8701 > start writing Lead-Out at LBA 257189 (3ECA5h), lenght 6750 blocks
2:12:48 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:12:50 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 12x (1,800 KB/s)
2:12:50 PM #23 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
2:13:06 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 257189 -> 257187.
2:14:57 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:14:57 PM #26 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
sorry to be such a pain in the butt, you guys. i'm so frustrated! i have a "personal" IT guy, and he is really stumped as well. there must be some simple explanation, right? i've never had this problem before; and it's weird that this would happen on BOTH machines. they are rarely linked, except when i want to send stuff over from one to the other (via crossover ethernet). strange strange strange.
T
|
|
