|
|
|
Issues
|
|
|
djrad
Newbie
|
19. November 2005 @ 08:47 |
Link to this message
|
|
Okay, I have been using DVD Decrypter and DVD Shrink. Up until about a week ago, everything has been fine (I think). Now, all of a sudden when I make backup of a movie, it plays great for about 45 minutes, then it starts to freeze up, jump around, or go to the menu screen. I am running Windows XP and have a Sony DVD burner. Is there something wrong with the drivers? or is a Nero issue? or maybe I am buring at too fast a speed? Please help. I have made 10 coasters in the last two weeks.
Robb
|
|
Advertisement
|
 |
|
|
Senior Member
|
19. November 2005 @ 09:42 |
Link to this message
|
Could be speed issue, could also be bad media issue. Could I have your Latest Nero log, or any of the logs that failed? The log will be in ProgramFiles\Ahead\Nero\NeroHistory. If you can't find it then just search. The diff sections are separated by this thing:
====== *** NeroAPI, History File *** ======
I will need everything under that, but only one section and the last section. And please remember to edit out your serial number, it'll be at the very top, usually starts w/ 1A2 or something.
|
|
djrad
Newbie
|
19. November 2005 @ 09:50 |
Link to this message
|
Thanks. I havent had any "fails" during the process. That is what is so strange.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DRU-530A> Version: 2.1a - HA 2 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : IDE-DVD ROM 16x atapi Port 2 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 2 ID 1 DMA: On
DiskPeripheral : Maxtor 6B200R0 atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
IDE-DVD ROM 16x E: CDRom0
SONY DVD RW DRU-530A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458220kB)
Free physical memory: 132MB (136048kB)
Memory in use : 70
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.11.2005
NeroAPI
12:54:16 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:54:16 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:54:16 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:54:16 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:54:16 AM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-530A running
12:54:16 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:54:16 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:54:16 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:54:16 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:54:17 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
12:54:17 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
12:54:17 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
12:54:17 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:54:17 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DRU-530A]
--------------------------------------------------------------
12:54:17 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
12:54:17 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:54:17 AM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
12:54:17 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:54:17 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
12:54:17 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:54:17 AM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: PRODISC.
Media type ID: R03
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
12:54:17 AM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
1:03:21 AM #23 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-530A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
1:03:22 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:03:49 AM #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11,080 KB/s)
1:03:50 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
1:03:50 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 10:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
Senior Member
|
19. November 2005 @ 10:09 |
Link to this message
|
Quote:
Recorder: <SONY DVD RW DRU-530A> Version: 2.1a - HA 2 TA 1 - 6.6.0.16
Nero is now running 6.6.0.18, your behing a version. When you go to update it only download packets 1&2. Your firmware is behind by several version. current is 2.1g, here's a link for that:
http://forum.rpc1.org/dl_firmware.php?download_id=1719
Quote:
Physical memory : 447MB (458220kB)
Free physical memory: 132MB (136048kB)
YOu shouldn't be multi-tasking when you burn. Via task manager close up all unneeded apps.
Quote:
12:54:17 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
You are using horrible media, switch to Taiyu Yuden or Verbatim. Sony and Fuji is fine but they have to be made in Japan.
Quote:
12:54:17 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
With good media like Taiyo Yuden 8x should be fine, but what you're using is crap so if you insist on using prodisc burn at no higher than 2x. But seriously don't use it, new disc'll run you about 30 cents a disc. don't cheap out.
|
|
djrad
Newbie
|
19. November 2005 @ 18:07 |
Link to this message
|
|
Great! let me see if these things help. I will post again tomorrow.
Robert
|
AfterDawn Addict
6 product reviews
|
19. November 2005 @ 18:22 |
Link to this message
|
Try the updates as suggested by GlueEater. I've had mixed results with that media. My litey hates them. They wouldn't even playback on my set top dvd player and the scans were horrid when burned with it but when burned with my benq they played just fine and the scans were good. Try slowing the burn speed to 2x. In the future I also recommend useing better media to avoid the problems like what you are having. My media of choice is verbatum DVD+R hub printables.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
djrad
Newbie
|
19. November 2005 @ 18:59 |
Link to this message
|
Okay, I was wrong. I was not using Nero, but was only using DVD Shrink to burn the discs. I will try better quality discs. I hope that solves it. Regardless, I updated Nero as well.
|
AfterDawn Addict
6 product reviews
|
19. November 2005 @ 19:04 |
Link to this message
|
Dvd shrink does not incorperate it's own burn utility but instead uses nero or dvd decrypter to burn and it was most likely useing nero in your case unless you instructed it to make an iso and burn with dvd decrypter.
Your firmware is several updates behind as well. The current is 2.1g and yours is 2.1a http://forum.rpc1.org/dl_firmware.php?download_id=1719 I would definately update the f/w.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 19. November 2005 @ 19:09
|
|
Advertisement
|
|
|
|
djrad
Newbie
|
20. November 2005 @ 17:42 |
Link to this message
|
|
The other strange thing is that these DVDs play fine on my desktop and laptop computer?
Robb
|
|
