|
|
|
Prodisc compatible?
|
|
|
Atmos
Junior Member
|
19. November 2005 @ 14:22 |
Link to this message
|
|
I just got 50 new prodisc, dvd-r printables off ebay, and they seem fine, the first one worked out, but now i am getting an error at the start of the burning process, with DVD Shrink. I am wondering if there is something I can do to make these new discs work with my burner, which is a Sony dual layer, not sure the model (about 1.5 yrs old). I used Taiyo Yuden before this, and I think I had to configure those too, but i have no idea ho i did it. Someone here helped me. I would like to do something without wasting anymore discs tryin to burn, Thanks for your time...
|
|
Advertisement
|
|
|
|
|
Atmos
Junior Member
|
19. November 2005 @ 15:01 |
Link to this message
|
|
Ok, the Burn Error is:
Burn Process failed at 1x(1,385 KB/s)
then below, there is a long list of detailed errors i guess with the burner and the disc.... I cant copy/paste that list cuz its on a different computer without the internet, i will try later.
|
|
Atmos
Junior Member
|
19. November 2005 @ 16:48 |
Link to this message
|
|
Ok, i finally got my internet hooked up on the other computer and the exact burn error is this:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 2:35:34 PM
Nero API version: 6.6.0.15
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 15h
Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-75CAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Lite-On LTN486S 48x Max atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
Lite-On LTN486S 48x Max D: CDRom0
SONY DVD RW DRU-710A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261124kB)
Free physical memory: 93MB (95712kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.11.2005
NeroAPI
4:51:38 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
4:51:38 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
4:51:38 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
4:51:39 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
4:51:39 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
4:51:39 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:51:39 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:51:39 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:51:39 PM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
4:53:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2103183 (467:22.33, 4107MB)
4:53:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO
4:53:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
4:53:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
4:53:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2103184 (2103184) = #2103184/467:22.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2103184 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
4:53:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4307320832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2103184 | lead-out | 1 | 0x41 | 0x00
4:53:00 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
4:53:00 PM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
4:53:00 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
4:53:00 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 1x (1,385 KB/s)
4:53:00 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:53:00 PM #21 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode for Multisession
4:53:00 PM #22 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
4:53:00 PM #23 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: No
4:53:00 PM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:55:17 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05CD5E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
4:55:17 PM #26 SCSI -1080 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x015F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x00
4:55:17 PM #27 CDR -1135 File Writer.cpp, Line 311
Write error
SONY DVD RW DRU-710A\H1 T1
4:55:17 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:55:17 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:55:17 PM #30 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was 31
4:55:17 PM #31 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05CD4C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x00
4:55:17 PM #32 CDR -1080 File WriterStatus.cpp, Line 167
Disc not present
4:55:17 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
4:55:17 PM #34 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 1x (1,385 KB/s)
4:55:18 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:55:18 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
If anyone understands this, PLEASE let me know, thanks a lot...
This message has been edited since posting. Last time this message was edited on 19. November 2005 @ 18:24
|
Senior Member
|
19. November 2005 @ 17:01 |
Link to this message
|
Quote:
Recorder: <SONY DVD RW DRU-710A> Version: BYX4 - HA 1 TA 1 - 6.6.0.15
Your Nero is out of date, current version is 6.6.0.18. Your firmware is also out of date, current version is here:
http://forum.rpc1.org/dl_firmware.php?download_id=1917
Quote:
Physical memory : 255MB (261124kB)
Free physical memory: 93MB (95712kB)
You shouldn't be multitasking when you are burning. Close all unneeded apps via task manager.
Quote:
4:53:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
DO NOT use PROdisc. They are sucky bunch of sucks that ever sucked. It really is horrible media. Use either Taiyo Yuden or Verbatim. Sony and Fuji are fine so long as they are made in japan.
You better hope creaky doesn't see this or he'll give you a link with a one page response on it. It seems he has created a thread for every bad media out there.
|
AfterDawn Addict
6 product reviews
|
19. November 2005 @ 18:07 |
Link to this message
|
|
As GlueEater pointed out, try updating your f/w and nero. I've had mixed results with prodisc media. When burned with my litey they would not play back on my set top dvd player and the scans were ugly (btw your sony is a rebadged lite-on) but when burned with my benq playback was fine and scans were good. Your sony drive is capable of booktyping dvd+r media to dvd-rom thus making them more compatable with set top players and I would therefor recommend useing dvd+r media and booktype them dvd-rom. I too would recommend useing better media in the future such as verbatum or taiyo yuden to avoid problems like what you are having. My media of choice is verbatum dvd+r hub printables. Looks like you could do with another 256 mb or 512 mb stick of memory also. Good luck, hope this helps.
BTW edit out your nero serial no in the log. It starts with 1A22
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 19. November 2005 @ 18:11
|
|
Atmos
Junior Member
|
19. November 2005 @ 18:27 |
Link to this message
|
Ok, thanks a lot guys that was helpful info, I just wish I didnt waste my money on these Prodiscs. (Whats the best place to order printables Taiyo Yudens from?) Also, I am wondering what the best and safest way is to buy the new version of Nero...online? I would like to order both these things tonight, so I can use my new computer for burning (thats why im not using the other one, with the low memory, its pretty old too).
|
|
Advertisement
|
|
|
AfterDawn Addict
6 product reviews
|
19. November 2005 @ 18:50 |
Link to this message
|
Good online stores to buy from are supermediastore.com, rima.com, meritline.com, and newegg.com. Compare prices between TY's and verbatum's. They are both top notch media. There is always a risk of getting fake TY media but very slim chance from the retailers I mentioned.
You don't need to buy the Nero update just simply open Nero then click on Nero in the upper left corner then check now then click on the green circles. Note: dont install INCD.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
