|
|
|
Backing up Cowboy Bebop: The Movie
|
|
|
POFurious
Newbie
|
21. November 2005 @ 06:13 |
Link to this message
|
Hello all; this is my first post here. I recently bought most of the Cowboy Bebop DVD's, and my first move (as with all my software) was to back it up.
Only problem is, I'm getting coaster after coaster, and I'm at my wits' end.
Basically, I'm using DVDShrink and Nero. I've already attempted to back it up with three DVD-R's and I've gotten three coasters back. And at $9 AUD a pop, that's $24 wasted on ....-ups alone.
My initial reaction was that the screensaver screwed it. I disabled that and everything progressed smoothly enough, till I burnt and got a coaster back.
Second time around, I updated my drive's firmware. I'm using an OptoWrite DD1601 (http://www.optorite.com/_english/web/1_product/1_feature.php?hChk...) with the most recent firmware upgrade. I tried again, I got a coaster.
Then I checked the discs I was using. I'm using a stack of TDK DVD+R 2.4x Speed Double Layer 8.5 Gb DVD's. I checked the disc manufacturer and it's a RICOHJPN D00. I looked it up and according to this (http://www.digitalfaq.com/media/dvdmedia.htm) it seems to be a relatively reliable 'media' to work with.
I'm beginning now to think it's a hardware error. And considering I've only got one disc left to trial this on, I have to get it right. The HDD isn't on the same cable, as advised, but the DVD burner is Slave instead of Master, and there is a (unused) CD burner on the same cable. At any rate, getting my optimism up because I thought I'd get lucky a third time, I went through it again with DVD Shrink, Nero, the updated firmware, the checked discs and the rest.
Nero returned this to me:
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDR/RW DD1601> Version: 16AF - HA 1 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDR/RW DD1601 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8520B D: CDRom0
DVDR/RW DD1601 E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 72MB (74740kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.11.2005
NeroAPI
12:22:31 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
12:22:31 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
12:22:31 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
12:22:32 AM #4 Text 0 File Reader.cpp, Line 126
Reader running
12:22:32 AM #5 Text 0 File Writer.cpp, Line 124
Writer DVDR/RW DD1601 running
12:22:32 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:22:32 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:22:33 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:22:33 AM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
12:23:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3573631 (794:08.31, 6979MB)
12:23:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
12:23:01 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDR/RW DD1601, Media type: DVD+R9 Double Layer
12:23:01 AM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
12:23:01 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 3573632 (3573632) = #3573632/794:8.32
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3573632 blocks [DVDR/RW DD1601 ]
--------------------------------------------------------------
12:23:01 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDR/RW DD1601 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7318798336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3573632 | lead-out | 1 | 0x00 | 0x41
12:23:03 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
12:23:04 AM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
12:23:04 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
12:23:04 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2.4x (3,324 KB/s)
12:23:04 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:23:04 AM #21 Text 0 File DVDPlusDualLayer.cpp, Line 451
L0 Data Zone Capacity set to 1819152 (1BC210h, 3553MB) -> OK, confirmed setting
12:23:04 AM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 467
Burning Layer 1
12:23:04 AM #23 Text 0 File DVDPlusDualLayer.cpp, Line 475
Start writing layer 1 at address 0 (0h)
12:23:04 AM #24 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02068000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
12:23:04 AM #25 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
12:42:10 AM #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 1638
Burning Layer 2
12:42:10 AM #27 Text 0 File DVDPlusDualLayer.cpp, Line 1645
Perform layer 1 to 2 jump before writing at address 1819168 (1BC220h)
12:42:26 AM #28 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1B 0xC3 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
12:42:26 AM #29 CDR -1135 File Writer.cpp, Line 304
Write error
12:42:26 AM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:42:27 AM #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
12:42:27 AM #32 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
12:42:27 AM #33 CDR -1176 File WriterStatus.cpp, Line 164
Session fixation error
12:42:27 AM #34 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
12:42:27 AM #35 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2.4x (3,324 KB/s)
12:42:27 AM #36 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
12:42:27 AM #37 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
For the love of God, someone help me please. I'm at my wit's end. =\
EDIT: I just noticed something unusual. One of the ones I 'canned' appears to have nearly the right amount on it. I've got an *.ISO on here that's 7,318,519,808 bytes (6.81 Gb) which works flawlessly, but the 'messed up' CD is 7,318,261,760 bytes (6.81 Gb).
I don't get it. :S
EDIT 2: Okay, it seems that everything else but the final chapter of the movie is working. So that 250-odd meg that got trimmed off was during my favorite and the lead up to the climax/conclusion. Damn.
This message has been edited since posting. Last time this message was edited on 21. November 2005 @ 07:00
|
|
Advertisement
|
|
|
|
Moderator
|
21. November 2005 @ 08:25 |
Link to this message
|
hi...
Quote:
Nero API version: 6.3.1.20
- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php
Quote:
Recorder: <DVDR/RW DD1601> Version: 16AF
- firmware is up to date according to this - http://forum.rpc1.org/dl_firmware.php?download_id=1994 HOWEVER that was dated 11months ago. not good, as your burner isn't recognising the media.. see further down my reply
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- yup, Nero's too old to recognise your burner. update Nero
Quote:
Physical memory : 255MB (261620kB)
Free physical memory: 72MB (74740kB)
Memory in use : 71 %
- 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory
Quote:
Recorder: DVDR/RW DD1601, Media type: DVD+R9 Double Layer
- the burner can't recognise that disc properly, here's an example (not the best example as it's CMC but it's an example) of what it should look like, ie this should be a 3line paragraph detailing the media. don't know what to suggest here as your burner's firmware is to old to recognise those discs - Quote:
Recorder:
DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
Quote:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
- self explanatory
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
Session fixation error
- see previous 2 comments
Quote:
Existing drivers:
- the ATAPI drivers are supposed to be listed in this section, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 21. November 2005 @ 08:26
|
|
POFurious
Newbie
|
21. November 2005 @ 21:25 |
Link to this message
|
Again, it didn't work. I addressed the ASPI drivers, the version of Nero, and even installed more memory, put the drive itself in a new machine (my proper one). The only reason it says unknown media, I think- is because that's when I took the movie DVD OUT of the drive.
In any case, here's the error log. It's either the drive or the media. I ran Nero InfoTool and it picks up the drive alright and all that jazz, even tells me the CD manufacturer (same as before). Have I been scammed into buying dodgy DVD's or is it just bad luck?
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 2
Recorder: <DVDR/RW DD1601> Version: 16AF - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340016A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDR/RW DD1601 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
OtherPeripheral : MYLEX GAM Device flashpnt Port 3 ID 6 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM E: CDRom2
DVDR/RW DD1601 F: CDRom0
Generic DVD-ROM H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 516MB (529100kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.11.2005
NeroAPI
4:32:46 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
4:32:46 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
4:32:46 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
4:32:47 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
4:32:47 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
4:32:47 PM #6 Text 0 File Writer.cpp, Line 113
Writer F: DVDR/RW DD1601 running
4:32:47 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:32:47 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:32:47 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:32:47 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
4:38:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3573631 (794:08.31, 6979MB)
4:38:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
4:38:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: DVDR/RW DD1601, Media type: DVD+R9 Double Layer
4:38:32 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
4:38:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3573632 (3573632) = #3573632/794:8.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3573632 blocks [F: DVDR/RW DD1601]
--------------------------------------------------------------
4:38:32 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDR/RW DD1601] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7318798336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3573632 | lead-out | 1 | 0x41 | 0x00
4:38:32 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:38:32 PM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
4:38:33 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
4:38:33 PM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
4:38:33 PM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
4:38:33 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:38:33 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 476
L0 Data Zone Capacity already set to 2086912 (1FD800h, 4076MB), requested last LBA L0 1786879 (1B43FFh, 3489MB) ignored
4:38:33 PM #24 Text 0 File DVDPlusDualLayer.cpp, Line 639
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
4:38:33 PM #25 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1
4:38:33 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
4:38:33 PM #27 SPTI -1066 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x1375b200: Len x804
4:38:33 PM #28 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
5:00:28 PM #29 CDR -1206 File DVDPlusDualLayer.cpp, Line 1910
Burning Layer 2
5:00:28 PM #30 Text 0 File DVDPlusDualLayer.cpp, Line 1921
Perform layer 1 to 2 jump before writing at address 2086912 (1FD800h)
5:00:41 PM #31 SPTI -1135 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1F D9 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x13980000: Len x10000
0x00 00 01 BA 45 C1 84 21 26 3B 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 00 57 6E FB 0B CD 80 4D A9
0x40 0F 1D 4F 00 9D CA 03 9C 3A 14 3D BD 5F 1B 37
5:00:41 PM #32 CDR -1135 File Writer.cpp, Line 302
Write error
F: DVDR/RW DD1601
5:00:41 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:00:42 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:00:42 PM #35 SPTI -1176 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
5:00:42 PM #36 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
5:00:42 PM #37 Phase 129 File APIProgress.cpp, Line 278
Generating DVD borders completed successfully
5:00:42 PM #38 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
5:00:42 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:00:42 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 9:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 17/04/2005 8:30:47 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 21. November 2005 @ 21:26
|
Senior Member
|
21. November 2005 @ 21:31 |
Link to this message
|
|
|
Moderator
|
21. November 2005 @ 21:34 |
Link to this message
|
i'd go with jmet on this one..
as to the Nero bits, Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- this burner still isn't catered for in Nero as it's being generically detected
Quote:
Recorder: DVDR/RW DD1601, Media type: DVD+R9 Double Layer
- media still not being recognised - same reason as i gave before
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
POFurious
Newbie
|
22. November 2005 @ 04:56 |
Link to this message
|
|
Right. I'll try that. Fortunately, I was sensible enough to make an ISO of it, so hopefully that should work.
Thanks for the help Creaky and JMet, I really appreciate it. I'll see how I go with it tomorrow. :)
|
|
Advertisement
|
|
|
Moderator
|
22. November 2005 @ 05:00 |
Link to this message
|
cool, keep us posted; jmet's DVD Decrypter advice is probably your best bet here...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
