|
|
|
Burn Error
|
|
|
tracy2181
Newbie
|
28. November 2005 @ 15:49 |
Link to this message
|
|
I am hoping someone can help me. I have been reading up on everyone's problems with burn errors, but none seem to be the same as mine. I have included my burn error message that I get. I am using Fuji DVD+R blank DVDs.
Thanks,
Tracy
1A20-***********************
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DW-U18A> Version: UYS1 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV6003H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMBI RW16x10/DVD atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
COMBI RW16x10/DVD E: CDRom0
SONY DVD RW DW-U18A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522776kB)
Free physical memory: 272MB (279392kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.11.2005
NeroAPI
8:03:46 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
8:03:46 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
8:03:46 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
8:03:46 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
8:03:46 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-U18A running
8:03:46 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:03:46 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:03:46 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:03:47 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:11:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
8:11:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
8:11:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-U18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
8:11:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
8:11:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [SONY DVD RW DW-U18A]
--------------------------------------------------------------
8:11:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-U18A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286160 | lead-out | 1 | 0x41 | 0x00
8:11:02 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
8:11:02 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:11:02 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
8:11:02 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
8:11:02 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:11:02 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
8:11:02 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
8:16:23 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C080000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0x51 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
8:16:23 PM #24 CDR -1114 File Writer.cpp, Line 311
Reset occurred
8:16:23 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:16:23 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:16:47 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
8:16:47 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:16:47 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 30. November 2005 @ 10:00
|
|
Advertisement
|
|
|
|
Senior Member
|
28. November 2005 @ 16:08 |
Link to this message
|
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
I don't think you have your drive installed correctly, do you have the master and slave set correctly?
Quote:
Physical memory : 510MB (522776kB)
Free physical memory: 272MB (279392kB)
Memory in use : 46 %
You shouldn't be multi-tasking when you are burning, turn off all apps via task manager during the whole process.
Quote:
8:11:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
You are writing too close to the edge, write no further than 4300MB.
Quote:
8:11:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-U18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
This is something that Alkohol pointed out in another thread, but now that I think about it is kinda true. Ritek was suppose to be a pretty good quality media, but now we've been getting alot of burn errors w/ Ritek so switch to something like Taiyo Yuden or Verbatim, Sony and Fuji are fine so long as they are Made in Japan, the same goes for Maxell.
Quote:
Existing drivers:
No drivers are showing up which mean I'm almost certain you don't have your jumpers loaded correctly.
|
Moderator
|
30. November 2005 @ 10:01 |
Link to this message
|
|
@tracy2181 - i've edited out your serial number -
1A20-***********************
in future pls do not post any serial numbers :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
tracy2181
Newbie
|
30. November 2005 @ 23:15 |
Link to this message
|
|
Hi GlueEater,
I don't know what jumpers are or how to set master and slave correctly or what they even are. Are there any websites where I could get more info on these and how to set them correctly.
Thanks,
Tracy
|
AfterDawn Addict
|
30. November 2005 @ 23:32 |
Link to this message
|
Quote:
Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C080000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0x51 0x60 0x00 0x00
I don't know, but lately I've seen a lot of RITEK with "KEY_MEDIUM_ERROR" and now "(STATUS_CHKCOND, KEY_UNIT_ATTENTION)", so maybe it's good to try other high quality like Taiyo Yuden, Verbatim and Maxell (made in japan).
Below is an example successful burned log of mine. You can compare mine to yours and see if you'll notice any differences.
Quote:
David X
Home Use
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 557MB (570388kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.11.2005
UDF/ISO compilation
12:58:38 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
12:58:38 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
12:58:38 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:58:38 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
12:58:38 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
12:58:38 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:58:38 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
12:58:38 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:58:39 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:58:39 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
12:58:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2253359 (500:44.59, 4401MB)
12:58:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)
12:58:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:58:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:58:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2253360 (2253360) = #2253360/500:44.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253360 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
12:58:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4614881280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2253360 | lead-out | 1 | 0x41 | 0x00
12:58:39 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:58:39 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
12:58:39 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
12:58:39 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
12:58:39 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
12:58:39 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:58:39 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:58:39 PM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:58:39 PM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
12:58:39 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:12:55 PM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2253360 (226230h), length 0 blocks
1:12:55 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:13:19 PM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
1:13:19 PM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This is what "GlueEater" was talking about; again it's taken from mine, and yours doesn't seem to have them.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
This message has been edited since posting. Last time this message was edited on 30. November 2005 @ 23:35
|
Senior Member
|
1. December 2005 @ 14:55 |
Link to this message
|
|
Did you install your Burner yourself or did it come w/ the comp? IF it came w/ it then send it back to them and they'll fix it for you, if you installed it yourself then it should have came w/ an instruction booklet.
|
|
tracy2181
Newbie
|
1. December 2005 @ 15:39 |
Link to this message
|
|
I installed it myself, now the problem is trying to find where I put the darn instruction booklet.
|
Senior Member
|
1. December 2005 @ 18:00 |
Link to this message
|
|
|
|
tracy2181
Newbie
|
1. December 2005 @ 23:14 |
Link to this message
|
|
I transferred the burner to my other computer (it's faster and better than the other I was using) and I don't seem to have any problems. If my drivers are off wouldn't that effect my burning no matter which CPU I was using?
-Tracy
|
AfterDawn Addict
|
2. December 2005 @ 03:59 |
Link to this message
|
On the 'good' computer, run Nero Startsmart, locate Nero Toolkit then run InfoTool then click on the 'Aspi' tab.Look at Nerpo aspi layer and system aspi layer.Then do the same on the problem machine and see if they are the same.
|
|
tracy2181
Newbie
|
2. December 2005 @ 17:16 |
Link to this message
|
My Nero ASPI is installed and working on both computers and on both computers I have no System ASPI installed. I have also been getting some burn errors on my 'good' computer, but not as many, so I am not sure what is wrong. I don't know what a System ASPI is or how I would go about installing one. Does this having something to do with my burn errors?
Thanks,
Tracy
|
AfterDawn Addict
|
3. December 2005 @ 05:08 |
Link to this message
|
Before going too far into drivers, have a look at this link.
http://www.videohelp.com/dvdwriters.php?DVDnameid=269&Search=Sear...
You mention that the good PC has occasional burning problems which contradicts your earlier post, or did you mean that there was no problems except when you moved the Sony drive to it?
It seems, from the opinions posted on the link that the drive is very picky when it comes to media.I would buy a small pack of Maxell -R, which the package will say are made in Japan (I think the 10 packs in jewel cases) and try them before going further.
|
|
tracy2181
Newbie
|
4. December 2005 @ 04:14 |
Link to this message
|
The good computer had no burn errors for a while on the discs that I had had problems with on the bad computer, but I was too quick in saying that it didn't get any burn errors because a couple of days later I was getting burn errors again. I tried Sony DVD+R that are made in Japan but I got burn errors with those. I don't know how to switch over to -R DVDs, can you tell me how, my burner supports those, but I don't know where to go to enable my burner to burn those. Also I have been looking for a new burner, any ideas on what would be the best?
Thanks,
Tracy
|
AfterDawn Addict
|
4. December 2005 @ 04:42 |
Link to this message
|
See this thread, very similar to your problem and note the reply from 'creaky' regarding 'aspi'
http://forums.afterdawn.com/thread_view.cfm/265883
He gives a link which will help you install the required ASPI layer, then you can eliminate that as the problem.
Also as regards DVD-R disks, you just insert the disk.The burner should accept it.
I note that 'creaky' has not subscribed to your thread, which surprises me.If you are not making progress you might PM himself and ask him to look at your thread.
|
Member
|
4. December 2005 @ 04:46 |
Link to this message
|
you dont need to enable anything to burn -rs just put them in your drive and burn like normal. you could go to http://www.newegg.com/ProductSort/SubCategory.asp?SubCategory=5 for a good place to buy dvd burners for around 40$. i would buy a lite-on because they dont have riplock at all whick slows down the extraction of dvds to your hard drive on most brands and can booktype my +rs to dvd-rom
This message has been edited since posting. Last time this message was edited on 4. December 2005 @ 05:01
|
Moderator
|
4. December 2005 @ 05:07 |
Link to this message
|
Quote:
I note that 'creaky' has not subscribed to your thread, which surprises me.If you are not making progress you might PM himself and ask him to look at your thread.
- i'm a few replies up, but i didn't get chance to come back yet.. i subscribe to virtually all Nero threads, but hadn't got around to this one 'til now.. :), will have a read thru...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 4. December 2005 @ 05:08
|
Moderator
|
4. December 2005 @ 05:31 |
Link to this message
|
right... have had a look thru, nothing wildly different from what the other guys have found/recommended....
Quote:
Existing drivers:
- the ATAPI drivers are supposed to be listed in this section, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm however if the burner is external to the PC you may not have to bother with this - see my last comment.
Quote:
Recorder: <SONY DVD RW DW-U18A> Version: UYS1
- There's a 'UYS4' dated June 28th, 2004 (still quite old though but might do the trick) here -
Quote:
Recorder: SONY DVD RW DW-U18A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
- (see previous comment). your firmware is current enough to recognise those Ritek discs, as if it was too out of date you'd see just the first line ie - Quote:
Recorder: SONY DVD RW DW-U18A, Media type: DVD+R
- however maybe the newer firmware will improve things.
edit- the burner appears to be ecternal to the PC, ie USB or similar ?, do you know if you have USB2.0 or the older USB1.1 ??
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 4. December 2005 @ 05:34
|
AfterDawn Addict
|
4. December 2005 @ 07:37 |
Link to this message
|
|
|
Senior Member
|
4. December 2005 @ 08:20 |
Link to this message
|
|
I think creaky meant that it's exxternal via a box.
|
AfterDawn Addict
|
4. December 2005 @ 11:02 |
Link to this message
|
|
IDE converted to USB?
|
|
Advertisement
|
|
|
Moderator
|
4. December 2005 @ 15:47 |
Link to this message
|
|
yup to last 2 replies :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
