|
|
|
To Convert AVI to DVD with Nero Vision 4 (basic guide)
|
|
|
rahkel
Newbie
|
29. January 2006 @ 08:31 |
Link to this message
|
could i download Nero on www.isohunt.com?
XD
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
30. January 2006 @ 09:07 |
Link to this message
|
|
@rahkel
Honestly, I don't know. There's alternatives, but it's best to buy the full functional version.
Good luck!!
|
AfterDawn Addict
|
30. January 2006 @ 09:18 |
Link to this message
|
@nitnylion
Quote:
########################################################################
[08:58:05] DVDEngine ERROR
[08:58:05] DVDEngine cause: 3 (invalid_parameter)
[08:58:05] DVDEngine source: _get_PGC_PB_TM
[08:58:05] DVDEngine description: ICellRef refers a cell (VOB_IDN=1, C_IDN=15) which does not exist in
[08:58:05] DVDEngine VTSTT_VOBS#1.
[08:58:05] DVDEngine ########################################################################
There is something wrong in your VTS_VOB, possibly cell 1 or maybe it's corrupted. Have K-Lite Codec Pack fix or runs through your AVI file to check for any codec issues or corrupted files, then try to transcode and convert again. Here http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm (it's FREE)
Other than that, everything looks fine to me. Just make sure you run a "scan disk/disk clean up" and "defrag your hard drive" on a daily basis to better/smoothen the performances when converting or transcoding with Nero Vision.
Good luck!!
This message has been edited since posting. Last time this message was edited on 30. January 2006 @ 09:19
|
Senior Member
|
30. January 2006 @ 10:52 |
Link to this message
|
Oh no help me please!
I have a video of my little brothers first steps andi think its mp4. I also have a film in the same format and i need to burn them to dvds.
I have Nero 6 burner but when i click make a dvd, it comes up with two serparate folders to add to, one being video and one being audio.
Help me please with a step by step guide as to how to but them on disc. If additional software is needed please post a link also.
Thanks ireland!![afterdawn legend]
|
Senior Member
|
30. January 2006 @ 10:56 |
Link to this message
|
|
Sorry about double post but someone, i cant remember name, just asked about downloading nero. You can download any free trial
remainder of post removed due to piracy
This message has been edited since posting. Last time this message was edited on 30. January 2006 @ 20:05
|
Moderator
|
30. January 2006 @ 20:06 |
Link to this message
|
|
@billybob, the Forum Rules are in my sig, Piracy is not on, i've edited your post
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Senior Member
|
31. January 2006 @ 01:27 |
Link to this message
|
|
Oh im very sorry, not a good start.
But how can i put that video of my little brother onto dvd?
I think its mp4 but im not sure, its just a normal fiel to play in windows mediaa player.
Could somebody please help?
Thanks ireland!![afterdawn legend]
|
|
watannie
Newbie
|
31. January 2006 @ 03:06 |
Link to this message
|
thankyou for your help in showing how to use Nero,I have been trying to get this easy on screen insructions for ages and thanks to you i can now download.CHEERS
|
|
Hallaw
Suspended due to non-functional email address
|
31. January 2006 @ 16:48 |
Link to this message
|
hy
i have conerted one movie on Nero vision 4 but the menus bottons aren´t "clickable".
So today I decided to uninstall Nero using the general cleaning tool and then install the latest version (7.0.1.4b). That I did but the problem remains, thumbnails can not be highlighted or clicked on :(
Any suggestions?
|
Senior Member
|
31. January 2006 @ 22:43 |
Link to this message
|
|
Hello all. Can somebody please answer my question, not to be rude but its urgent the video of mybro is a gift.
Unclickable thumbnails? I really don't no much about youru version at all, have you got all available updates etc? Thats all i can suggest sorry im not much help.
I look forward to people helping me on my program.
Thanks ireland!![afterdawn legend]
|
|
martin16v
Junior Member
|
1. February 2006 @ 03:55 |
Link to this message
|
i tryed to convert a AVI dvdrip 700mb, 1h.22m.22sec vid.
vid >>> high quality
audio >> 2 pass
is there much difference between high quality and standard play?
or is there a work around.
xp pro/sp 2
120gb hdd
plextor dvd-r
matshita dvd-rom
Abit NF7-S V2.0 Mobo,
xp2500 mobile @ 200x11/1.5v,
2X512 crucial Pc3200,
MSI RX800 Pro-TD256 AGP 256M
PA9C-42CU cooper heatsink
Zalman ZM-47J Northbridge Heatsink
600watt psu
|
|
martin16v
Junior Member
|
1. February 2006 @ 04:24 |
Link to this message
|
xp pro/sp 2
120gb hdd
plextor dvd-r
matshita dvd-rom
Abit NF7-S V2.0 Mobo,
xp2500 mobile @ 200x11/1.5v,
2X512 crucial Pc3200,
MSI RX800 Pro-TD256 AGP 256M
PA9C-42CU cooper heatsink
Zalman ZM-47J Northbridge Heatsink
600watt psu
|
AfterDawn Addict
|
1. February 2006 @ 11:37 |
Link to this message
|
I've always done mine via 2 PASS VBR with High Quality settings + Progressive and I'm pretty much satisfied with the results, so far it's awesome.
However, the choice is yours. If speed is what you need, then use Standard, if quality is what you need, then use High Quality + 2 Pass VBR.
|
|
martin16v
Junior Member
|
1. February 2006 @ 12:28 |
Link to this message
|
if i try to use 2 PASS VBR with High Quality settings i get the warnig as in the first link above.
but if i set it to 2 PASS VBR with standard play Quality i loose nearly 1gig and Nero seems happy as in the second link above.
i would prefer 2 PASS VBR with High Quality settings.
xp pro/sp 2
120gb hdd
plextor dvd-r
matshita dvd-rom
Abit NF7-S V2.0 Mobo,
xp2500 mobile @ 200x11/1.5v,
2X512 crucial Pc3200,
MSI RX800 Pro-TD256 AGP 256M
PA9C-42CU cooper heatsink
Zalman ZM-47J Northbridge Heatsink
600watt psu
|
AfterDawn Addict
|
1. February 2006 @ 13:32 |
Link to this message
|
@martin16v
It's OK (that's normal), it means that Nero Vision is trying to get you the best quality possible available. Therefore, it's using a lot of space on the disc or hard disk. You can clearly see that with "2 Pass VBR + High Quality + Progressive" required more spaces on the disc than just a basic/Standard Quality.
To solve your problem, just click OK and continue on, but make Nero Vision burn your project into your hard drive (it can be over 4.38GB, sometimes I have 4.7GB and I click OK) and let it converted/trancoded my AVI projects into DVD and burned it on my hard drive. However, once it's done converting and burned into your hard drive. You need to "transcode/compress" with Nero Recode2 to fit onto a DVD-R or DVD+R disc (just like you're compressing or transcoding a new release movie into any DVD-R or DVD+R disc).
*NOTE: to get the best/highest quality when using Nero Recode 2.
<> checked "Advanced Analysis" and "High Quality Mode (slow recording)"
Good luck!!
|
|
martin16v
Junior Member
|
2. February 2006 @ 10:30 |
Link to this message
|
|
thanks for the feed back but after one hour into the conversion system locked up.................three attempts and three lock ups later i through the towel in.
to get the job done and backed up i used Canopus ProCoder 2. excellent picture but the audio seems quieter than the original.
xp pro/sp 2
120gb hdd
plextor dvd-r
matshita dvd-rom
Abit NF7-S V2.0 Mobo,
xp2500 mobile @ 200x11/1.5v,
2X512 crucial Pc3200,
MSI RX800 Pro-TD256 AGP 256M
PA9C-42CU cooper heatsink
Zalman ZM-47J Northbridge Heatsink
600watt psu
|
|
bojan28
Newbie
|
4. February 2006 @ 10:12 |
Link to this message
|
I started a new thread but i will ask for help for my problem here also.when i start Nero vision on Nero smart menu i am getting error:
Unable to load licensing subsystem
is there any solution for this problem?
reinstall is not helping
thanx in advance
Peace,Love & Harmony!
|
AfterDawn Addict
|
5. February 2006 @ 17:44 |
Link to this message
|
@bojan28
I can't comment in regards to the error you're having simply because that never happened to me before. I could only suggest you get Nero's Clean Tool to completely clean out Nero from your system, then go to "regedit" and delete every Nero files/programs. Now try to reinstall Nero again to see if your problem is solved.
Good luck!!
|
|
loveya
Suspended due to non-functional email address
|
6. February 2006 @ 12:01 |
Link to this message
|
@alkohol
First of all, great job! You know, you are a genius. Helping everybody all ;) Keep up the good work.
Ok, now I have a itsy bitsy question that need your help with....
Here goes...I just burned tons of DVD-9 to DVD-5 disc using Nero Recode with like no visible loss of quality (I'm very impressed with the advice you gave me last time) . First, how come the disc freezes a few times when I was watching it? (Is it maybe caused by my kids running in the same room making bunbing into the comp. and everything?) Secondly, after recoding and burning, the menu ends up being after the main movie and not before it. That just made me mad because I'd used all that space for the menu and it's for nothing.
Thanks in advance,
Loveya
<-- http://byethost.com -->
For Free Byethost Hosting Support,SEO Tips,Web Templates,Adsense Tips, and many more... |
AfterDawn Addict
|
6. February 2006 @ 23:19 |
Link to this message
|
@loveya
There could be a few other things that can cause your backup(s) to pause or have a few glitches like new protections, poor media, burning too fast, firmware needs updates, etc. Yes, "Wedding Crashers, The Cave, The Fog, Dark Water, Legend Of Zorro, Red Eye, Brothers Grimms, The Great Raid, Madagascar, Sky High, etc." all of them has the latest ARccOS and RipGuard protections, so you'll need a free tool like VobBLanker 2.1.0.0 to PROCESS and filter out those craps, junks, dummy cells, or fake pgcs/sectors in order to have a successful backup.
First of all, what kind of blank media did you used? And did you customize the size to at least 4360MB or 4400MB? I need to know what kind of burner you have and is the firmware up-to-date? Let me know, so I can refer you to the right firmware that's available for your drive. Firmware plays a big role when it comes to dvd burnings, it helps to enhnances the burning performances and media compatibility.
Secondly, are you multi-tasking while burning (i.e. surfing the net, having a lot of programs running in the background)? I recommend you not to surf the net, if you can disconnect from the internet and shutdown as many programs as possible. Or if you can, then release more memory ram by disabling/shuting down other unnecessary running programs as well.
Can you at least post your Nero burning log, so I can take a closer look at it? If you're using Nero 6 Ultra, go here: C:\Program Files\Ahead\Nero\Nero History, if it's Nero 7 Ultra, then go here: C:\Program Files\Nero\Nero 7\Core\Nero History -- then get your Nero log, but REMEMBER to EDIT out your Nero serial before you're going to post back here.
|
|
Donna1973
Newbie
|
7. February 2006 @ 09:03 |
Link to this message
|
Hi there, I am having trouble as well burning AVI files, got the pic no probs, but the sound is a little slower than the pic, using Nero 7 tried doing as was mentioned earlier, still no joy
|
AfterDawn Addict
|
8. February 2006 @ 00:14 |
Link to this message
|
Did you tried to run your AVI files through k-lite codec pack in prior to start your project with Nero Vision?
|
|
mikehende
Member
|
8. February 2006 @ 05:51 |
Link to this message
|
That is a great tutorial, I have printed it out for future use but have run into some problems, I followed the instructions to the letter but I am not seeing some of the options that's listed in the tutorial. I have Nero6 "Ultra" version. So I chose to burn to the HD as Alkohol recommends but using Nerovision Express 3, I don't see:
1] The Video Format option in the Video Options window, all that is there is the "Audio" Format which is already set to "Automatic".
2] In the Choose Recorder window, under Options, there isn't any "Book Type Settings" under the Power Burn, eberything else is there except for the booktyping thing.
So now, I go and open Nero Burning Rom to burn the now converted AVI file, when I click on Open, I am directed to a Folder named "Video_TS" and in there I see 6 files,
vts_01_1 [DVD movie]
vts_01_0 [DVD Movie info]
vts_01_0 [Back up file of the IFO]
VIDEO_TS [DVD movie]
VIDEO_TS [DVD movie]
VIDEO_TS [Back up file of the IFO]
I then try to import either of the 2 files that reads DVD Movie but I get an error message that reads "Unexpected File Format". Can anyone address these for me please? Thanks.
|
|
Donna1973
Newbie
|
8. February 2006 @ 07:07 |
Link to this message
|
|
hi there, thanks I will try that now
|
|
Advertisement
|
|
|
|
Donna1973
Newbie
|
8. February 2006 @ 07:12 |
Link to this message
|
is that by using the Nero recode
|
|
