Brothers Grimm problem
|
|
rw2516
Junior Member
|
20. December 2005 @ 13:44 |
Link to this message
|
Ran into problem with Brothers Grimm. I'm running the latest AnyDVD.
DVDecrypter cannot open the disc. Tried many times and log stops at devices found. The title of the dvd does come up and it creates the destination folder but the files do not appear and Decrypter closes itself after a minute or so. So I tried Shrink. Something about this disc slows shrink waaaay down. Around four minutes to analyze and 2 hours to encode but eventually errors with the "Out of Memory Not Enough Storage is Available to Process the Command" message. Also when poking around the files to see what I want to get rid of or play in the preview window Shrink was not responding correctly, I'd get the little hourglass "wait" when moving from main movie to extra features, etc.
Finally gave up and tried another dvd to make sure everything was working ok and had no problems.
Went back to Brothers Grimm to try again. Decrypter still would not open the disc. Tried Shrink again and this time it started to encode at normal speed(45-50min) but still errored with the "Out of Memory" message. Out of curiosity I looked to see how large the file in the Shrink folder was, 49.2MB. Don't know if that's normal or not but the drive has 50.5GB of free space.
Tried every combination of AnyDvd, Decrypter and Shrink. No luck. Suggestions?
|
Advertisement
|
  |
|
AfterDawn Addict
|
20. December 2005 @ 13:51 |
Link to this message
|
Did you try CloneDVD2 with AnyDVD?
How about DVDFab decrypter?
|
ScubaBud
AfterDawn Addict
|
20. December 2005 @ 14:24 |
Link to this message
|
or...
I just did this movie with AnyDVD and Nero Recode2 which is almost the same as DVD Shrink. Try using shrink if you don't have Recode2.
This message has been edited since posting. Last time this message was edited on 20. December 2005 @ 14:24
|
AfterDawn Addict
|
21. December 2005 @ 10:48 |
Link to this message
|
The question begs to be asked...How much ram do you have in your system?
|
rw2516
Junior Member
|
21. December 2005 @ 13:37 |
Link to this message
|
512 Memory. It's just something about this disc. Just having it open in the drive takes up all available memory. Take it out and everything is back to normal. Went ahead and tried several other discs and everything works fine. While Shrink is encoding any other disc I minimized Shrink and opened and ran other programs with no problem. I cruised the Internet with McAfee running a virus scan and Shrink running with no slow down. With The Brothers Grimm in the drive it took a couple minutes for the Shrink window to minimize after clicking on minimize and no other programs would respond. Also took the Shrink window a few minutes to come back up after clicking on restore.
|
rw2516
Junior Member
|
21. December 2005 @ 14:40 |
Link to this message
|
Just having the disc in the drive is not doing it. Playing it with WMP does not suck up all the memory. It's opening the disc with Shrink or Decrypter that sucks up all the memory so that's there is not enough memory for either program to run.
|
Senior Member
3 product reviews
|
21. December 2005 @ 14:57 |
Link to this message
|
Brothers Grimm was EASY with CloneDVD 2 & AnyDVD
(Latest version).Also backed it up with Nero Recode & AnyDVD.
Easy one.
Try CloneDVD 2 & AnyDVD and back-up main movie only. Take out the audio languages you don't need to get the compression to at least 60% or higher. This is a 2 hour movie, so it's pretty big.
But easy to make the back-up with this method.
Use The Best Media for The Best Burns! TYs, Verbs,(Made in Taiwan) Sony MIJs (YUDEN000 T02), Sony Made in Taiwan DVD+R 16x, Maxell MIJ, RITEK G05.
This message has been edited since posting. Last time this message was edited on 21. December 2005 @ 15:00
|
AfterDawn Addict
|
22. December 2005 @ 16:31 |
Link to this message
|
Use the task manager to see what all you have running at any given time. You'll be suprised.
|
ScubaBud
AfterDawn Addict
|
22. December 2005 @ 16:35 |
Link to this message
|
It almost sounds like your DVD reader doesn't like the disk and has a hard time reading it.
|
Member
|
22. December 2005 @ 17:19 |
Link to this message
|
I agree with ScubaBud, it does sound like a drive problem...
|
Senior Member
3 product reviews
|
22. December 2005 @ 19:01 |
Link to this message
|
@rw2516,
Yes, it may be as simple as updating your reader firmware to better support reading DVD-9 discs. Or, maybe you need a new reader. Me, I would try a firmware update first. The method I used worked very well with Perfect results & went quickly & was easy too. Try CloneDVD 2 & AnyDVD. Maybe it will do fine! You have the latest AnyDVD, try the FREE 21 day trial of CloneDVD 2. What do you have to lose?
Use The Best Media for The Best Burns! TYs, Verbs,(Made in Taiwan) Sony MIJs (YUDEN000 T02), Sony Made in Taiwan DVD+R 16x, Maxell MIJ, RITEK G05.
|
oupiin
Newbie
|
22. December 2005 @ 19:13 |
Link to this message
|
I used AnyDVD ( newest version ) along with DVD Shrink and it ran like a champ. Played the whole movie on an Xbox and it is running on a Phillips DVD player now.
There is a help file on how to do it if this does not work. Dated 12-20 I believe.
Hope this helps.
Oupiin
|
rw2516
Junior Member
|
23. December 2005 @ 15:14 |
Link to this message
|
It's just possible my drive doesn't like this disc. ALL other discs work fine. Also works fine with computer media players. Both drives(HL-DT-ST DVD-ROM GDR8162B and PIONEER DVD-RW DVR-107D). For whatever reason, opening this disc with Shrink or Decrypter(in either drive)(AnyDVD on or off) causes the CPU(Pentium 4) to lock up immediately in either drive. It's like there is something at the very beginning of the disc that the computer is working so hard to get around that it locks up and both Shrink and Decrypter quit responding. Is there something at the very beginning of this disc? I'm going to give DVD Clone a shot tomorrow. If that doesn't work I'll quit worrying about it. Just one movie. Haven't had a problem with other new releases. Haven't ruled out that it may be an actual error on this disc not related to any type of protection.
|
rw2516
Junior Member
|
23. December 2005 @ 15:20 |
Link to this message
|
OOPS! Messed up the bold face. Sorry.
|
ScubaBud
AfterDawn Addict
|
23. December 2005 @ 15:29 |
Link to this message
|
rw2516
I would first try another disk, maybe from a friend that has the same movie or rent one just to see if it will work for you. I bet that will correct the problem. In other words, its probably a bad stamping of an original disk.
Good luck
|
rw2516
Junior Member
|
24. December 2005 @ 04:03 |
Link to this message
|
Well, downloaded trial of CloneDVD and it worked. Still curious about why the other programs were acting the way they were.
|
h-k
Suspended due to non-functional email address
|
25. December 2005 @ 14:08 |
Link to this message
|
I had the same problem with shrink (with AnyDVD running) on this DVD. Got the out of memory error. Then I just did a copy/paste of the video_ts folder to my HD with AnyDVD running and I got it no problem. After that shrink worked fine on the ripped files. I noticed this happens on discs with ripgaurd.
|
b18bek9
Member
1 product review
|
25. December 2005 @ 18:42 |
Link to this message
|
i'm surprised not alot of people use dvdfab anymore well i guess i'm jus use to the couple of decryptors i have an Nero an shrink but u can try using that an shrink or Nero with dvdfab
|
marrero66
Junior Member
|
25. December 2005 @ 19:43 |
Link to this message
|
i have the same problem and i did it the same way that madagascar
1:dvdfab decripter
2:vobBlanker
3:dvd shrink or recode
4:burn with nero
and work exellent with all menus and extras
|
Senior Member
3 product reviews
|
25. December 2005 @ 20:05 |
Link to this message
|
Use The Best Media for The Best Burns! TYs, Verbs,(Made in Taiwan) Sony MIJs (YUDEN000 T02), Sony Made in Taiwan DVD+R 16x, Maxell MIJ, RITEK G05.
|
Newbie
|
28. December 2005 @ 09:01 |
Link to this message
|
@Gottawin
Your sig block sure makes it difficult to stay focused...
|
RSG003
Suspended due to non-functional email address
|
28. December 2005 @ 12:54 |
Link to this message
|
Its not a drive error or memory problem. I had the same problem using 1CLICKDVDPRO and AnyDVD.Both latest versions, and I have 1gb of ram. Brothers Grimm is loaded with just about every protection..at least according to AnyDVD. I do own clonedvd2 just for problems like this and with AnyDVD there was no problem. Just a problem with 1clickdvdpro.
|
Senior Member
3 product reviews
|
28. December 2005 @ 18:12 |
Link to this message
|
Well, I have said it before & I'll say it again: CloneDVD 2 & AnyDVD can back-up any commercial DVD out there at this time. Any of them. This is The Best Combination going! Slysoft Rules!
Use The Best Media for The Best Burns! TYs, Verbs,(Made in Taiwan) Sony MIJs (YUDEN000 T02), Sony Made in Taiwan DVD+R 16x, Maxell MIJ, RITEK G05.
|
j4oodyii
Suspended due to non-functional email address
|
28. December 2005 @ 22:19 |
Link to this message
|
How many people are using laptops? I am having the same problem with Brothers Grimm. I have a laptop and not only does shrink run out of memory but so does Nero. I have tried recently AnyDVD with Nero and got 39% through the burn before it ran out of memory. I know it has something to do with laptop!! I think...
|
Advertisement
|
  |
|
j4oodyii
Suspended due to non-functional email address
|
28. December 2005 @ 23:26 |
Link to this message
|
Well I hate to sound like everyone else but AnyDVD and clonedvd2 ripped a perfect copy. I won't use any other program from now on.
|