|
|
|
nero express 6 problem?
|
|
|
whale_ann
Newbie
|
4. January 2006 @ 07:14 |
Link to this message
|
|
Hi, if anyone could provide some pointers... many thanks in advance.
I've just brought a LG DVD writer and came with bundled Nero Express 6.6.0.15. I was attempting to clone DVD movie into DVD-R, some titles were successfully burned while other titles were consistently halted with "Reading disc failed" at the source disc toward the final 90+% progress bar.
Below is the error log. Any cure? or should i use other s/w?
-Log---------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004
11:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15i
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-242 F: CDRom0
HL-DT-ST DVDRRW GSA-2164D G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 387MB (397224kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.1.2006
===== Disc-Copy over image - 1st step : Copy to image ...
12:08:14 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
12:08:14 AM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
12:08:15 AM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1
(0)
12:08:15 AM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
12:08:15 AM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
12:08:15 AM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
12:08:15 AM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
12:08:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
12:08:15 AM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:08:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder]
--------------------------------------------------------------
12:08:16 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295104 | lead-out | 1 | 0x41 | 0x00
12:08:16 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
12:08:16 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:27:24 AM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068D1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x10 0x00
12:27:25 AM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
12:27:25 AM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1040
12:27:27 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:27:40 AM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
===== Disc-Copy over image - 2nd step : Burn the image ...
12:08:14 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
12:08:14 AM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
12:08:15 AM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1
(0)
12:08:15 AM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
12:08:15 AM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
12:08:15 AM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
12:08:15 AM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
12:08:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
12:08:15 AM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:08:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder]
--------------------------------------------------------------
12:08:16 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295104 | lead-out | 1 | 0x41 | 0x00
12:08:16 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
12:08:16 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:27:24 AM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068D1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x10 0x00
12:27:25 AM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
12:27:25 AM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1040
12:27:27 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:27:40 AM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win
NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win
NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win
NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-- whale --
|
|
Advertisement
|
|
|
|
|
drew9190
Junior Member
|
4. January 2006 @ 09:51 |
Link to this message
|
i recommend you get Nero 7
|
Moderator
|
4. January 2006 @ 12:25 |
Link to this message
|
Nero 7 will not help here....
Quote:
Nero Version: 6.6.0.15
- not too bad, 6.6.0.18 is latest 6.x version
Quote:
Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01
- it would appear there's no newer firmware for this burner yet...
Quote:
DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: Off
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
===== Disc-Copy over image - 1st step : Copy to image ...
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
12:08:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Error reading data
Reading disc failed
- you appear to be trying to copy a single layered discs's-worth of data from a dual layer disc that your burner's firmware is unable to recognise
Quote:
===== Disc-Copy over image - 2nd step : Burn the image ...
Reader running
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
12:08:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Error reading data
Reading disc failed
- see previous comment. you need to try different discs, that your burner's firmware can recognise..
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for winNT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for winNT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for winNT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 4. January 2006 @ 12:26
|
|
whale_ann
Newbie
|
5. January 2006 @ 03:35 |
Link to this message
|
1st would like to apologise to 2x posting... realised "nero dicussion" is more appropriate...
Thanks creaky for the dissects.
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
== the the HDD DMA is already on, the other CDRW/DVD is not involve in this burning process. hence, may not try now...;<
- you appear to be trying to copy a single layered discs's-worth of data from a dual layer disc that your burner's firmware is unable to recognise
== Yap, my friend who pass me the disc may have strip from dual layer to single layer. His disc (the source) is perform playing. Does that affect my burner unable to recongnise? strange. Don't know what action to take here.
- see previous comment. you need to try different discs, that your burner's firmware can recognise..
== if you meant trying different target disc such as DVD+R or DVD+-RW types? can work on this and let you know if it works...:>
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
== ok, with do this 1st!
-- whale --
|
Moderator
|
5. January 2006 @ 03:44 |
Link to this message
|
|
you still need to do the DMA stuff though as any drives not in DMA mode will be in 'PIO' mode, and will drag the speed of all other drives down..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
whale_ann
Newbie
|
5. January 2006 @ 05:28 |
Link to this message
|
I've performed DMA on and uninstallation of InCD, reinstall Nero. However, Burn failed error still persists.
should i try this then? "== if you meant trying different target disc such as DVD+R or DVD+-RW types?"
OR
it is a situation of "== Yap, my friend who pass me the disc may have strip from dual layer to single layer. His disc (the source) is perform playing. Does that affect my burner unable to recongnise? "
if yes, what do i do?
---Below the new log--------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15i
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15
Adapter driver: <> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-242 F: CDRom0
HL-DT-ST DVDRRW GSA-2164D G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 401MB (410728kB)
Memory in use : 21 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.1.2006
===== Disc-Copy over image - 1st step : Copy to image ...
11:00:55 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:00:55 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
11:00:56 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
11:00:56 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
11:00:56 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
11:00:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
11:00:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
11:00:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
11:00:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:00:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder]
--------------------------------------------------------------
11:00:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295104 | lead-out | 1 | 0x41 | 0x00
11:00:57 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
11:00:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:14:06 PM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068F1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x10 0x00
11:14:07 PM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
11:14:07 PM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1040
11:14:07 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:14:10 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
===== Disc-Copy over image - 2nd step : Burn the image ...
11:00:55 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:00:55 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
11:00:56 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
11:00:56 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
11:00:56 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
11:00:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
11:00:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
11:00:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
11:00:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:00:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder]
--------------------------------------------------------------
11:00:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295104 | lead-out | 1 | 0x41 | 0x00
11:00:57 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
11:00:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:14:06 PM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068F1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x10 0x00
11:14:07 PM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
11:14:07 PM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1040
11:14:07 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:14:10 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-- whale --
|
Moderator
|
5. January 2006 @ 10:07 |
Link to this message
|
|
can still see 2 problems - InCD is still there, also the same discs are being used - your burner can't recognise these discs so it's no wonder it's not working
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Member
|
5. January 2006 @ 10:22 |
Link to this message
|
|
Hey Creaky: Long time no talk. I use Ner 6.6.0.18 and have no problems so I have been hesitant to upgrade because of all the problems I have been reading above in the new Version 7. Whats your take on it?
AMD 64X2 3800 Dual Core CPU
Asus A8N32-SLI Deluxe MB-Seasonic600WPSU-WDRAPTORX150GIG HD 10,000RPM/WDCaviar SE 16 WD2500KS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive/V/C MSI ATI ProTD-256E XI1600/2X1Gig Corsair XPS ram@3-3-3-8 1T
BenQ1640X3/BenQ1655/1650/1620/LG4163/Nec3520/3540
alan1476
|
Moderator
|
5. January 2006 @ 10:30 |
Link to this message
|
|
hey stranger, how's it going.
i've simply no need to ever go 7.x myself as i only do straight dvd burns/data & cd burns so Burning Rom 6.x is more than sufficient for me.
i see there are loads of teething problems with 7.x but there always are with new stuff. Alkohol is getting on great with 7.x and he uses stuff like Recode etc..
i would say up to you!
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
whale_ann
Newbie
|
10. January 2006 @ 01:21 |
Link to this message
|
|
Hi Creaky,
> can still see 2 problems - InCD is still there, also the same
> discs are being used - your burner can't recognise these discs so
> it's no wonder it's not working
I thought I've uninstalled InCD with reboot, and then selected installation without InCD. I did these without using Nero's Clean Tools. I simply uninstall program add/remove. Is there such a tool? I've searched here and Nero's website... did not find any.
What should I do now?
-- whale --
|
|
Advertisement
|
|
|
Moderator
|
10. March 2006 @ 02:46 |
Link to this message
|
|
@whale_ann - just catching up on 3months of replies, did you ever get any further with your burning ?...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
