|
|
|
Power calibration error
|
|
|
elawley23
Junior Member
|
28. January 2006 @ 11:43 |
Link to this message
|
|
Can someone please help
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <HP DVD Writer 400c> Version: KH27 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380013A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : E-IDE CD-ROM 45X atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 400c D: CDRom0
E-IDE CD-ROM 45X E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 221MB (226584kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.1.2006
NeroAPI
2:57:30 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:57:30 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:57:30 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:57:30 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:57:30 PM #5 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 400c running
2:57:30 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:57:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:57:30 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:57:30 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:57:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2160655 (480:08.55, 4220MB)
2:57:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:57:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 400c, Media type: DVD+R
2:57:31 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:57:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2160656 (2160656) = #2160656/480:8.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2160656 blocks [HP DVD Writer 400c]
--------------------------------------------------------------
2:57:31 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4425023488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2160656 | lead-out | 1 | 0x41 | 0x00
2:57:31 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:57:31 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:57:31 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:57:31 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
2:57:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:57:31 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BD70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
2:57:31 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
2:58:07 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x73 0x03
2:58:07 PM #24 CDR -1106 File Writer.cpp, Line 311
Power calibration error
2:58:07 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:58:08 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:58:08 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
2:58:08 PM #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
2:58:08 PM #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
2:58:08 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
2:58:08 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:58:08 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Lsu
|
|
Advertisement
|
|
|
|
|
andmerr
Suspended permanently
|
28. January 2006 @ 12:52 |
Link to this message
|
A power calibration error is caused by the inability of a DVD-RW drive to use a DVD-R or DVD-RW disk.(also effects cd rom drives)
DVD-R and DVD-RW disks themselves have information written on them, within this Media ID code there is information that the drive uses to calibrate itself to the disk, when a drive first starts to write to a disk it will burn a small amount of data to a calibration area on the disc, using the calibration information in the Media ID code, and then try to read back the data that it has written. If it cannot be read, then disk will be ejected and fail with a power calibration error.
A power calibration error is normally caused by problems with the media. Should you be experiencing problems with your drive or the media, we recommend that a disk from a good quality manufacturer be used to test it.
|
Moderator
1 product review
|
28. January 2006 @ 14:07 |
Link to this message
|
Power calibration errors can mean many things. As andmerr stated, this error can be due to the media you are using. It also can mean that the drive is not getting the power it needs(check you cables to see that they are seated securely), and lastly and I hope this isn't the case...you drive is dead(buy a new one).
But before we buy a new drive, lets try the cheaper solutions first.
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
This means the drive doesn't like your media, change to Verbatim, Taiyo Yuden or Sony, Maxell, Fuji(made in Japan)...stay away from Memorex, Imation, Philips, Kyphermedia, etc. all made in Taiwan.
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
I also see you have the Nero InCD package installed...a big no,no. Uninstall Nero completely off your system and reinstall omitting the InCD package, it is known to bugger with DVD burning.
|
|
andmerr
Suspended permanently
|
28. January 2006 @ 15:38 |
Link to this message
|
|
see wasnt that easy locoeng...............lol
|
Moderator
1 product review
|
28. January 2006 @ 15:48 |
Link to this message
|
|
Thanks for the tip...LOL
You knew I'd bite, didn't you...
|
|
andmerr
Suspended permanently
|
28. January 2006 @ 18:52 |
Link to this message
|
|
pretty much..................
|
|
elawley23
Junior Member
|
29. January 2006 @ 06:29 |
Link to this message
|
|
Thankyou, I was using maxell disks, It has worked for 2 years, I will take off incd and check the cables, but in 2 years a lot of disks have went through the burner,it is a good chance that it is finally going out, thankyou again for the reply
Lsu
|
|
andmerr
Suspended permanently
|
29. January 2006 @ 08:46 |
Link to this message
|
|
thats a definite possibility, i have done 10000+ and killed my burner.Had to get another one
|
|
elawley23
Junior Member
|
29. January 2006 @ 09:37 |
Link to this message
|
|
I have not done that many, maybe in the 2000 range, i just blew a little air duster in the drive and it worked for one burn and then quit again, i have used the drive disk cleaners and that did not work.
Lsu
|
Moderator
1 product review
|
29. January 2006 @ 16:09 |
Link to this message
|
|
Taiwanese or Japanese Maxell's, there is a difference.
|
|
elawley23
Junior Member
|
30. January 2006 @ 04:17 |
Link to this message
|
|
I do not know, but I am going to buy some sonys and try them out
Lsu
|
Moderator
1 product review
|
30. January 2006 @ 12:39 |
Link to this message
|
|
Where they are made should be printed around the UPC code.
|
|
elawley23
Junior Member
|
18. February 2006 @ 18:12 |
Link to this message
|
|
I have now tryed sony disks from japan and I uninstalled incd from my computer and I am still getting the 'Power calibration error'
Lsu
|
|
andmerr
Suspended permanently
|
18. February 2006 @ 20:09 |
Link to this message
|
you did use the Nero clean tools didnt you
|
|
elawley23
Junior Member
|
18. February 2006 @ 20:33 |
Link to this message
|
|
I just did, I am going to try and burn again
Lsu
|
|
elawley23
Junior Member
|
18. February 2006 @ 20:44 |
Link to this message
|
It still is not working , here is a new log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <HP DVD Writer 400c> Version: KH27 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380013A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : E-IDE CD-ROM 45X atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 400c D: CDRom0
E-IDE CD-ROM 45X E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 164MB (168744kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2006
NeroAPI
11:04:22 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
11:04:22 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
11:04:22 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:04:23 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:04:23 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:04:23 PM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 400c running
11:04:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:04:23 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:04:23 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:04:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2125103 (472:14.53, 4150MB)
11:04:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:04:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 400c, Media type: DVD+R
11:04:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:04:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2125104 (2125104) = #2125104/472:14.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2125104 blocks [HP DVD Writer 400c]
--------------------------------------------------------------
11:04:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4352212992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2125104 | lead-out | 1 | 0x41 | 0x00
11:04:23 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:04:23 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:04:23 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:04:23 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
11:04:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:04:23 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C700600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
11:04:23 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:04:39 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
11:04:39 PM #24 CDR -1135 File Writer.cpp, Line 311
Write error
11:04:39 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:04:39 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:04:39 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
11:04:39 PM #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
11:04:39 PM #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
11:04:39 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
11:04:39 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:04:39 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Lsu
|
Moderator
1 product review
|
19. February 2006 @ 15:17 |
Link to this message
|
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Still isn't liking your discs, have you tried a different brand?
I'm going to call in our resident Nero expert, Creaky, and maybe he can find something we are missing.
|
|
elawley23
Junior Member
|
20. February 2006 @ 11:33 |
Link to this message
|
|
I just got a new burner and hooked it up and it is doing the same thing my old burner was doing, it is giving my the power colibration error, my new burner is a lacie D2, I do not know what could be wrong
Lsu
|
Moderator
1 product review
|
20. February 2006 @ 13:05 |
Link to this message
|
|
I know it's frustrating but be patient, Creaky will be around shortly.
|
|
elawley23
Junior Member
|
20. February 2006 @ 13:53 |
Link to this message
|
|
I updated the firmware on my new lacie d2 burner and it started working, I have done 2 movies so far, I do not what to say to much, I am afraid I will jinks it, thank you for all your help and happy burning
Lsu
|
Moderator
1 product review
|
20. February 2006 @ 15:20 |
Link to this message
|
|
Please don't jinx it...glad you got it working.
Happy burning.
|
Moderator
|
12. March 2006 @ 04:43 |
Link to this message
|
|
oops just noticed i hadn't LOCOENG's PM. oops., but at least you're all sorted :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Moderator
1 product review
|
12. March 2006 @ 05:16 |
Link to this message
|
|
Better late than never Creaky...LOL
|
|
Advertisement
|
|
|
|
andmerr
Suspended permanently
|
12. March 2006 @ 09:31 |
Link to this message
|
|
how far behing did you say you were creaky???????lol
|
|
