|
|
|
Write Error
|
|
|
BreadC
Newbie
|
20. February 2006 @ 09:23 |
Link to this message
|
|
no wonder they were on special offer :@
|
|
Advertisement
|
|
|
|
Senior Member
|
20. February 2006 @ 15:01 |
Link to this message
|
|
@cyprusrom
Thanks for taking care of this while i was away from the thread. Media choice is very important to a successful burn. So is a proper or not corrupt ASPI. Looks like BreadC is doing fine without one for the system.
It is best to do whatever you can to get burning again, and not spend a whole bunch of money in the process. Usually the cheapest fix is to replace media if crappy, and fix any software/firmware issues. Media is usually the cheapest and fastest thing to change/try.
@BreadC
Many would have given up and replaced the drive if in your place. You stuck with it, and now it looks like you will be joining the ranks of Good media users. Glad you are getting successful burns now.
Die CMC Mag!!! |
AfterDawn Addict
1 product review
|
20. February 2006 @ 18:18 |
Link to this message
|
|
@Maxburn
I'm glad you're back! I do what I can to help another AD-er, but my knowledge by far cannot match your expertise! probably some could "use" my help, but they definitely "need" yours!
It is amazing how many people at the begining reject the iddea of bad media, when they present a log with CMC Mag, or "Mr.DVD", and you tell them they wasted some money on crappy discs.
This message has been edited since posting. Last time this message was edited on 20. February 2006 @ 20:05
|
Senior Member
|
20. February 2006 @ 19:33 |
Link to this message
|
Thanks cyprusrom, but dont sell yourself short. You got BreadC burning again by doing what you said. Success. Thats all it takes. Get them back to burning by doing what you suggest, and in my book, you have skills.
Check out this thread. Some ppl still dont get it with CMC.
http://forums.afterdawn.com/thread_view.cfm/1/232406
We have a person saying the only problem with CMC is the firmware isnt correct, not the discs. I know, but this one belives this, and is trying to use psudo-science to convince everyone. I gave that one my answer. It goes something like this..PROVE IT.. LOL
Die CMC Mag!!!
|
AfterDawn Addict
1 product review
|
20. February 2006 @ 20:42 |
Link to this message
|
|
@Max,
That is a funny one!
I am always entertained by a thread like that regarding CMC Mag! Although, I wonder, could some people really be that ingorant, or they just start that kind of argument just for the fun of it?
This message has been edited since posting. Last time this message was edited on 20. February 2006 @ 20:43
|
|
LaraPR
Newbie
|
21. February 2006 @ 14:27 |
Link to this message
|
|
@ Max Burn
I'll think i will give up already, don't worry max this is the last time i will bother you and this is the last time i will try.....and I guess my A+ Tech Classes are not helping me at all (LOL)..well Max I did what you said, uninstalled INCD etc, and even try it with DVD Shrink and..........well just guess..the worst happened and i included my last Nero History log as you requested, and thanks for all your help your are the best!
1C80-XXXX_XXXX_XXXX_XXXX_XXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.5.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 5, 4
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHV2080AH atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 766MB (785392kB)
Free physical memory: 352MB (361420kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.2.2006
NeroAPI
8:04:23 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
8:04:23 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
8:04:24 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
8:04:24 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
8:04:24 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
8:04:24 PM #6 Text 0 File Writer.cpp, Line 113
Writer D: PHILIPS DVD+RW SDVD6004 running
8:04:24 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:04:24 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:04:24 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:04:24 PM #10 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:04:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202111 (489:21.36, 4300MB)
8:04:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO
8:04:24 PM #13 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
8:04:24 PM #14 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:04:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202112 (2202112) = #2202112/489:21.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202112 blocks [D: PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
8:04:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509925376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202112 | lead-out | 1 | 0x41 | 0x00
8:04:24 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:04:24 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:04:24 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
8:04:24 PM #20 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
8:04:24 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
8:04:24 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
8:04:24 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:04:24 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x06567400: Len x804
8:04:24 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
8:18:13 PM #26 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x2A 00 00 11 E5 E0 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 11 DC 40 0C 00 00 00 00 90 92
Buffer x00bb0000: Len x10000
0x00 00 01 BA 44 0C 94 F2 4C 55 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 65 1E A1 89 6D 6B A5 CB B2
0x17 14 E2 F0 A4 1D 58 35 00 D2 B7 9D D0 65 29 11
8:18:13 PM #27 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
8:18:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:18:13 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:18:18 PM #30 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF1 00 03 00 11 DC 40 0C 00 00 00 00 90 92
8:18:18 PM #31 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
8:18:18 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:18:18 PM #33 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
8:18:18 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:18:18 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
===== *** NeroAPI, History File *** ======
1C80-XXXX-XXXX-XXXX-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.0.5.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHV2080AH atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 766MB (785392kB)
Free physical memory: 473MB (484740kB)
Memory in use : 38
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.2.2006
DVD-Copy over Image
7:14:54 PM #1 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
7:14:54 PM #2 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
7:14:54 PM #3 Phase 23 File dlgbrnst.cpp, Line 1730
Reading disc aborted
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
1C80-XXXX-XXXX-XXXX-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.5.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 5, 4
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHV2080AH atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 766MB (785392kB)
Free physical memory: 350MB (359352kB)
Memory in use : 54
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.2.2006
NeroAPI
8:04:23 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
8:04:23 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
8:04:24 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
8:04:24 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
8:04:24 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
8:04:24 PM #6 Text 0 File Writer.cpp, Line 113
Writer D: PHILIPS DVD+RW SDVD6004 running
8:04:24 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:04:24 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:04:24 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:04:24 PM #10 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media
8:04:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202111 (489:21.36, 4300MB)
8:04:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO
8:04:24 PM #13 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
8:04:24 PM #14 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:04:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202112 (2202112) = #2202112/489:21.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202112 blocks [D: PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
8:04:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509925376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202112 | lead-out | 1 | 0x41 | 0x00
8:04:24 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:04:24 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:04:24 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
8:04:24 PM #20 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
8:04:24 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
8:04:24 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
8:04:24 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:04:24 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x06567400: Len x804
8:04:24 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
8:18:13 PM #26 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x2A 00 00 11 E5 E0 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 11 DC 40 0C 00 00 00 00 90 92
Buffer x00bb0000: Len x10000
0x00 00 01 BA 44 0C 94 F2 4C 55 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 65 1E A1 89 6D 6B A5 CB B2
0x17 14 E2 F0 A4 1D 58 35 00 D2 B7 9D D0 65 29 11
8:18:13 PM #27 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
8:18:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:18:13 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:18:18 PM #30 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF1 00 03 00 11 DC 40 0C 00 00 00 00 90 92
8:18:18 PM #31 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
8:18:18 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:18:18 PM #33 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
8:18:18 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:18:18 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 21. February 2006 @ 14:58
|
|
BreadC
Newbie
|
21. February 2006 @ 14:32 |
Link to this message
|
|
yes cyprusrom thank you for your help!!! i managed to burn 5 in a row now!!!! :D:D:D:D
i also tried one of those mr dvd. i picked up the spindel, took 3/4 of the top cd off and took one from underneath, and that 1 worked lol. but i am gonna go and buy Verbatim from now on no question about it.
thx again for your help cyprusrom :) it was appreciated!!
|
AfterDawn Addict
1 product review
|
21. February 2006 @ 14:45 |
Link to this message
|
@breadC
Quote:
took 3/4 of the top cd off and took one from underneath, and that 1 worked lol. but i am gonna go and buy Verbatim from now on no question about it.
You're welcome! But don't get fooled by one Mr.DVD that managed to make it through the burn! Even the worse media ever can work sometimes. But if you are pleased with a 50% or less success rate and poor video quality, you can try more Mr.DVDs(such a lame name!:)!)
Go to Best Buy if is close to you, or Office Max. OM has Verbatims 50 for $15!
|
AfterDawn Addict
1 product review
|
21. February 2006 @ 15:23 |
Link to this message
|
@Lara
Quote:
PRD: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x2A 00 00 11 E5 E0 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 11 DC 40 0C 00
I don't know if Max is attednding the thread right now, so i will ask you really quick: what kind of media are you using? Your log shows DVD+R, but no media code. It seems that your drive doesn't like/recognize that media.
Try some quality media. Once you use good media, I would speed up the burn to X4.
This message has been edited since posting. Last time this message was edited on 21. February 2006 @ 15:25
|
|
LaraPR
Newbie
|
21. February 2006 @ 15:48 |
Link to this message
|
|
@cyprusrom
Thanks Cyprusrom for your assistance My Dvd+R's are Sony
This message has been edited since posting. Last time this message was edited on 21. February 2006 @ 15:48
|
AfterDawn Addict
1 product review
|
21. February 2006 @ 16:08 |
Link to this message
|
If those Sonys are made in Japan, they are good media. but your burner does not like it. I know the version of Nero that you are running has been giving people problems, so you could try and get the earlier version that was much more stable and with no bugs.
ftp://ftp3.usw.nero.com/software/nero7/Nero-7.0.1.4b_eng_no_yt.exe
Quote:
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
Are you trying to do a "Copy on the fly", or "Burn at Once"? Can you describe exactly what you are trying to do?
If you want to switc to the cleaner version of Nero( I would recommend), use Nero Clean Tool from Nero website to uninstall Nero, do not do it from Control Panel.
This message has been edited since posting. Last time this message was edited on 21. February 2006 @ 16:09
|
|
LaraPR
Newbie
|
22. February 2006 @ 02:53 |
Link to this message
|
@cyprusrom
Yes They are made in Japan, and yes i was trying to use Nero Recode to burn directly fron DVD and then Nero will ask to insert a Blank Media, so i guess is better to save it at the hard disk first Maybe?...I will check with the other version that you recomended but i've been using Nero since forever and i think i tried that version before, because i just updated to the last version with the hope of those "supposely bugs fixes" and I thought it was my only hope..I guess it got it worse
|
AfterDawn Addict
1 product review
|
22. February 2006 @ 11:20 |
Link to this message
|
Lara,
Here is something I told to someone else:
Quote:
If reader and burner share the same IDE channel, this create a slowing of data flux between reader and burner.
On the fly copy is recommended only if reader and burner are on different IDE channels.
Another possibility if 1:1 copy has failed is because source disc is bigger than destination, so is necessary compression of the movie. Even with big CPU power, this operation is difficult on the fly, because video compression requires many passes
------------------------------------------------------------------
So, if you want to burn on the fly, the file should not need compression and should have a prformant burner able to read 2x faster than the burner. I would advise to copy the files on HDD and then burn the DVD. And yes,the latest version is buggy.
|
|
LaraPR
Newbie
|
23. February 2006 @ 15:41 |
Link to this message
|
|
Thanks I will try that!
|
Senior Member
|
25. February 2006 @ 04:31 |
Link to this message
|
Thanks Cyprusrom for helping in here while i was out. :)
To have the best chance of success on a DVD burn, extract files to HD and burn from there with recode as cyprusrom suggested. I think a HD reads the data faster/better than from the disc copies. I used to get coasters whenever i tried copy on the fly, and now i dont even try that way anymore. Most of the time i use AnyDVD and clonedvd2. Movie goes in one drive, blank disc in the other. Its always good to have an alternate method of ripping using different software. Nero is a great program when everything is working right. It can be very tempermental. Sometimes when we suspect Nero is the problem, trying a non-Nero burn tells you if Nero is the problem. DVD Shrink with DVD Decrypter used for the burn would tell us if its a Nero only problem. You can Google for those programs if you dont have them.
I like to use recode, clonedvd2 and DVD Shrink the most. If i need to rip a movie that has too high of compression for my liking, then i will use DVD Rebuilder Pro. Excellent but slow program.
Dont worry about bugging me. It doesnt bug me, but it does take me sometime to get back to a thread once in a while. The good thing is, someone will usually help you. Cyprusrom is a good example. Jumped right in here and started helping.. :)
@LaraPR
Use the version of Nero cyprusrom put up. We have been seeing all kinds of weird errors with the newest versions of Nero, and for many ppl going back to the last stable version fixes things. Also good media can make all the difference in the world. The Sony media, if MIJ will be Taiyo Yuden, best out there IMHO. Even the Sony MIT media is good, but the log is saying it doesnt like the media.
Burn at 4x
use good media
Dont multitask while burning
Those are some of the basic things we suggest when someone has burning problems. But in your case, Nero may be messing with you on the buggy updates they have put out lately.
Did you get your ASPI fixed? It can be either missing, or working, but corrupted ASPI will cause problems. You should see something like i posted earlier in this thread. Just check it with info tools to be sure its working properly. That and going back to the older version of Nero is worth a try. Your firmware is up to date on that drive. Id try better media.
You keep posting until we hear from you "success". Until then, we will keep trying as long as you do. Post the latest log on a failed burn, and we can try to find the errors.
Die CMC Mag!!!
|
AfterDawn Addict
1 product review
|
25. February 2006 @ 10:14 |
Link to this message
|
 Piss me off, and I Will ignore You!This message has been edited since posting. Last time this message was edited on 25. February 2006 @ 10:43
|
|
LaraPR
Newbie
|
25. February 2006 @ 11:02 |
Link to this message
|
@max and Cyprusrom
Well Guys seems that nothing works for me i keep wastin my DVD's No Matter what.. even when I first copy DVD into my Hard Disk the same error comes up and no matter what version i use sometimes I get section fixation error or unspecifed recorder error. I even Try Nero 6 and Clone DVD and I am fresh out of Ideas and actually almost out of DVD's since i had wasted them all so i guess I have two options throw my DVD Drive out of the window and buy and external one for my laptop or wait for a new vesion of Nero without so many bugs (Like that's is going to happen) so. Here is my last log..and thanks again for all your help !
====== *** NeroAPI, History File *** ======
1A23-XXXX-XXXX-XXXX-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\Nero\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 4d
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHV2080AH atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785392kB)
Free physical memory: 234MB (239636kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.2.2006
NeroAPI
2:42:30 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
2:42:30 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
2:42:30 PM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
2:42:30 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
2:42:30 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
2:42:30 PM #6 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+RW SDVD6004 running
2:42:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:42:30 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:42:30 PM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
2:42:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2204175 (489:49.00, 4305MB)
2:42:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
2:42:30 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
2:42:30 PM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:42:30 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2204176 (2204176) = #2204176/489:49.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2204176 blocks [PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
2:42:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4514152448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2204176 | lead-out | 1 | 0x41 | 0x00
2:42:30 PM #16 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:42:30 PM #17 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:42:30 PM #18 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
2:42:30 PM #19 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
2:42:30 PM #20 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
2:42:30 PM #21 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 2.4x (3,324 KB/s)
2:42:30 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:42:30 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x06790600: Len x804
2:42:30 PM #24 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
3:02:20 PM #25 SPTI -1 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x2A 00 00 1A 9D 60 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 1A 93 C0 0C 00 00 00 00 90 92
Buffer x064e0000: Len x10000
0x00 00 01 BA 44 0D 67 1D 1D E7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 14 7A 0A 99 AC 25 30 72 98
0x7A 90 1A 90 1D 59 50 42 AC 40 6D 55 48 16 15 23
3:02:20 PM #26 CDR -1 File Writer.cpp, Line 311
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
3:02:20 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:02:20 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:02:36 PM #29 SPTI -1 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x92
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0xF1 00 03 00 1A 93 C0 0C 00 00 00 00 90 92
3:02:36 PM #30 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
3:02:36 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:02:36 PM #32 Phase 38 File APIProgress.cpp, Line 275
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
dolphin2
Suspended due to non-functional email address
|
25. February 2006 @ 11:38 |
Link to this message
|
|
@ LaraPR
What is the rated speed of the discs you are trying to burn (ie the speed printed on the disc/label)?
The reason I ask is perhaps the discs are to new for your burner firmware to see. I tried to find the latest firmware version for your burner but didn't have any luck.
|
|
LaraPR
Newbie
|
25. February 2006 @ 11:58 |
Link to this message
|
|
@ Dolphin
Thanks For your help I had tried so far this speeds 1X-8x and 1X-16X
|
Senior Member
|
25. February 2006 @ 12:31 |
Link to this message
|
@LaraPR
Quote:
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06
Your firmware is up 2 date (i checked before in a prior log)
http://forum.rpc1.org/dl_firmware.php?download_id=1681
Quote:
3:02:36 PM #30 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
D: PHILIPS DVD+RW SDVD6004
You keep getting this error. Unspecified means Nero cant really tell you what is wrong with the drive. Try a laser lens cleaner on the burner. If that doesnt help, its looking more like the drive itself may be bad. Most of the problems seen here in the Nero forum are not bad drives, just bad setups or software/media. Sometimes it really is the drive, and no amount of "tweaking" on our part will fix that. I hate to suggest getting a new drive, as that is kind of like saying "i give up". But, that is the only way to fix a bad drive problem. Id also hate to see you buy a new drive and still have the same problem. Check the cable going to the drive. Sometimes this can be loose, or get messed up if its an external burner.
But before you do that, try the versions of Nero suggested. 6.6.0.18 was the last stable 6x version. Try it before replacing the drive.
Also Nero 7x stable version was 7.0.1.4. These newer versions are giving ppl "illegal disc" errors when they had none with the older versions.
Youve changed the media, firmware is up 2 date, your managing memory well, not burning too fast. Just those buggy Nero versions you are using may be your main problem. Its worth a try before buying a new drive.
Hang in there. I think we can get you burning, without buying a new drive. At least thats what im hoping for.
Die CMC Mag!!!
|
AfterDawn Addict
1 product review
|
25. February 2006 @ 12:36 |
Link to this message
|
|
You might also want to give it a try with some other kind of media. Although Sony MIJ is great quality media, maybe, your player just doesn't like this particular one. And i heve no ideea if burning "too slow" could be a problem, but I think X4 is a really safe speed. Could crank it up a little.
Piss me off, and I Will ignore You!
This message has been edited since posting. Last time this message was edited on 25. February 2006 @ 12:38
|
|
LaraPR
Newbie
|
11. March 2006 @ 12:24 |
Link to this message
|
@cyprusrom
Ok this is funny, I haven't been able to burn Full 1 and a half hour DVD's Just 37 or 40 minutes DVD's i cannot get it. take a look at this
********** Nero Recode **********
Version: 2.2.7.6
Project type: Copy entire DVD
Target size: Custom (2227200)
17:44:50 File LangStreamPatcher.cpp, Line 56
Command table patching started...
17:44:50 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!
Burn settings:
Target: PHILIPS DVD+RW SDVD6004
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Maria C\My Documents\Nero Recode (70749327360 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
17:44:52 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [1 vobus] 0.15MB -> 0.15MB [R 1.00]
Video: 0.15MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Menus Vobs [1 vobus] 0.10MB -> 0.10MB [R 1.00]
Video: 0.09MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [4301 vobus] 2159.26MB -> 2159.26MB [R 1.00]
Video: 2099.30MB, extra: 59.95MB
Audio: 8 streams
0. 0. Dolby Digital 2-ch English 51.55MB [enabled]
1. 1. Dolby Digital 5.1-ch English 0.00MB [enabled]
2. 2. Dolby Digital 5.1-ch English 0.00MB [enabled]
3. 3. Dolby Digital 5.1-ch English 0.00MB [enabled]
4. 4. Dolby Digital 5.1-ch English 0.00MB [enabled]
5. 5. Dolby Digital 5.1-ch English 0.00MB [enabled]
6. 6. Dolby Digital 5.1-ch English 0.00MB [enabled]
7. 7. Dolby Digital 5.1-ch English 0.00MB [enabled]
Subpicture: 32 streams
0. 0. Unspecified 0.00MB [enabled]
1. 1. Unspecified 0.00MB [enabled]
2. 2. Unspecified 0.00MB [enabled]
3. 3. Unspecified 0.00MB [enabled]
4. 4. Unspecified 0.00MB [enabled]
5. 5. Unspecified 0.00MB [enabled]
6. 6. Unspecified 0.00MB [enabled]
7. 7. Unspecified 0.00MB [enabled]
8. 8. Unspecified 0.00MB [enabled]
9. 9. Unspecified 0.00MB [enabled]
10. 10. Unspecified 0.00MB [enabled]
11. 11. Unspecified 0.00MB [enabled]
12. 12. Unspecified 0.00MB [enabled]
13. 13. Unspecified 0.00MB [enabled]
14. 14. Unspecified 0.00MB [enabled]
15. 15. Unspecified 0.00MB [enabled]
16. 16. Unspecified 0.00MB [enabled]
17. 17. Unspecified 0.00MB [enabled]
18. 18. Unspecified 0.00MB [enabled]
19. 19. Unspecified 0.00MB [enabled]
20. 20. Unspecified 0.00MB [enabled]
21. 21. Unspecified 0.00MB [enabled]
22. 22. Unspecified 0.00MB [enabled]
23. 23. Unspecified 0.00MB [enabled]
24. 24. Unspecified 0.00MB [enabled]
25. 25. Unspecified 0.00MB [enabled]
26. 26. Unspecified 0.00MB [enabled]
27. 27. Unspecified 0.00MB [enabled]
28. 28. Unspecified 0.00MB [enabled]
29. 29. Unspecified 0.00MB [enabled]
30. 30. Unspecified 0.00MB [enabled]
31. 31. Unspecified 0.00MB [enabled]
VTS_02 Menus Vobs [1 vobus] 0.15MB -> 0.15MB [R 1.00]
Video: 0.15MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_02 Title Vobs [73 vobus] 36.00MB -> 36.00MB [R 1.00]
Video: 35.41MB, extra: 0.59MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.44MB [enabled]
Subpicture: 0 streams
VTS_03 Menus Vobs [1 vobus] 0.15MB -> 0.15MB [R 1.00]
Video: 0.15MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_03 Title Vobs [64 vobus] 28.50MB -> 28.50MB [R 1.00]
Video: 27.57MB, extra: 0.93MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.81MB [enabled]
Subpicture: 0 streams
VTS_04 Menus Vobs [1 vobus] 0.15MB -> 0.15MB [R 1.00]
Video: 0.15MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_04 Title Vobs [1 vobus] 0.37MB -> 0.37MB [R 1.00]
Video: 0.37MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
17:45:33 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
17:45:33 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2227200 sectors (1139223 required)
17:45:33 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4350.00MB (2225.04MB obtained)
17:45:33 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
17:45:36 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.15MB -> Expected 0.15MB -> Output 0.15MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.15MB
Pictures Modified [I 0] [P 0] [B 0]
17:45:36 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 0.10MB -> Expected 0.10MB -> Output 0.10MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.09MB
Pictures Modified [I 0] [P 0] [B 0]
17:51:01 File NeroRecorder.cpp, Line 609
Added extra file VTS_01_2.VOB
17:54:37 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 2159.26MB -> Expected 2159.26MB -> Output 2159.26MB
Finished error -0.00MB
Ratio encoded = 1
Original encoded = 4300
Slide encoded = 0
StillImage encoded = 0
Output extra size = 58.89MB
Source video size = 2100.37MB
Pictures Modified [I 0] [P 0] [B 10]
17:54:37 File NeroRecorder.cpp, Line 609
Added extra file VTS_01_3.VOB
17:54:43 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Menus Vobs
VTS_02 Menus Vobs:
Original 0.15MB -> Expected 0.15MB -> Output 0.15MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.15MB
Pictures Modified [I 0] [P 0] [B 0]
17:54:50 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 36.00MB -> Expected 36.00MB -> Output 36.00MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 73
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.67MB
Source video size = 35.33MB
Pictures Modified [I 0] [P 0] [B 0]
17:54:51 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Menus Vobs
VTS_03 Menus Vobs:
Original 0.15MB -> Expected 0.15MB -> Output 0.15MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.15MB
Pictures Modified [I 0] [P 0] [B 0]
17:54:56 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Title Vobs
VTS_03 Title Vobs:
Original 28.50MB -> Expected 28.50MB -> Output 28.50MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 64
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.88MB
Source video size = 27.61MB
Pictures Modified [I 0] [P 0] [B 0]
17:54:57 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_04 Menus Vobs
VTS_04 Menus Vobs:
Original 0.15MB -> Expected 0.15MB -> Output 0.15MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.15MB
Pictures Modified [I 0] [P 0] [B 0]
17:54:57 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_04 Title Vobs
VTS_04 Title Vobs:
Original 0.37MB -> Expected 0.37MB -> Output 0.37MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.37MB
Pictures Modified [I 0] [P 0] [B 0]
17:54:57 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (2225.04MB)
17:55:19 File NeroRecorderBase.cpp, Line 1130
Burning 21 files with total size of 2333126656 bytes on hard disk
17:55:19 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
17:55:43 File NeroRecorderBase.cpp, Line 506
Writing to disc: D
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.4
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 0, 1, 4
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHV2080AH atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785748kB)
Free physical memory: 196MB (200976kB)
Memory in use : 74
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2006
NeroAPI
5:55:43 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
5:55:43 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
5:55:43 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
5:55:43 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
5:55:43 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
5:55:43 PM #6 Text 0 File Writer.cpp, Line 113
Writer D: PHILIPS DVD+RW SDVD6004 running
5:55:43 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:55:43 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:55:43 PM #9 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
5:55:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1139775 (253:17.00, 2226MB)
5:55:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
5:55:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
5:55:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:55:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1139776 (1139776) = #1139776/253:17.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1139776 blocks [D: PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
5:55:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2334261248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1139776 | lead-out | 1 | 0x41 | 0x00
5:55:43 PM #16 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:55:43 PM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
5:55:43 PM #18 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
5:55:43 PM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
5:55:43 PM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
5:55:43 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:55:43 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x06fd5200: Len x804
5:55:43 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:08:58 PM #24 Text 0 File WriterStatus.cpp, Line 116
<D: PHILIPS DVD+RW SDVD6004> start writing Lead-Out at LBA 1139776 (116440h), length 0 blocks
6:08:58 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:10:31 PM #26 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
18:10:32 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
AfterDawn Addict
1 product review
|
11. March 2006 @ 18:11 |
Link to this message
|
Well, from what I see the burn was succesful. Does the DVD play okay?
Quote:
6:10:31 PM #26 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
Piss me off, and I Will ignore You!
|
|
Advertisement
|
|
|
|
LaraPR
Newbie
|
13. March 2006 @ 01:40 |
Link to this message
|
|
Yes, But that is not any ordinary DVD is a Workout video DVD of 37 Minutes only , but if I try to Burn any DVD one and a half hour at least Movie then i get that error "unspecified error"
or others. What do you think? Weird right?
|
|
