|
|
|
Burner not working correctly???
|
|
|
hmaurice
Newbie
|
12. February 2006 @ 21:28 |
Link to this message
|
|
I have a Lite-on DVD rw LDW-411S, I have learned how to back up my DVD's with the help of people on this site, but now my drive is having problems recognizing anything I put in it? I can put a blank DVD, or CD in it, to try to copy something on it, and it says I have no blank DVD or CD in the drive. The light comes on, like it is reading it, then it goes off, and nothing. I am assuming I have to replace the drive, but I need to know with what type of equipment. I have a small tower, around the size of a VCR, so I wondered if there are only certain types I can get for it or not. Any help would be greatly appreciated. Thanks!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
13. February 2006 @ 03:35 |
Link to this message
|
|
first I would try to reboot the computer and try again. Then if that doesn't work I would go to Device Manager and uninstall and then install and reboot the computer. Windows will automatically recognize the drive and reinstall the drive when you reboot. Or something that is easy is to try different disks. You might need a firmware update to recognize your disk. there are many variables. good luck
|
|
sytyguy
Senior Member
|
16. February 2006 @ 08:49 |
Link to this message
|
hmaurice,
Quote:
I can put a blank DVD, or CD in it, to try to copy something on it, and it says I have no blank DVD or CD in the drive. The light comes on, like it is reading it, then it goes off, and nothing.
What software says that you have no blank DVD or CD in the drive?
Ihoe, has given you some sound advice, but let me elaborate, go to Device Mangager, then select the + sign next to IDE ATA/ATAPI controllers, then double-click on Secondary IDE Channel, then select the driver tab on the top, and then select uninstall. Select ok, and re-boot.
HTH,
Rich
|
Senior Member
|
16. February 2006 @ 09:12 |
Link to this message
|
|
|
hmaurice
Newbie
|
10. March 2006 @ 19:19 |
Link to this message
|
I bought a new spindle of Blank DVD's they are memorex DVD-R 8x 4.7gb, I have used the brand before, and the speed, not quite sure bout the + and - thing, I know I usually get the one with the + sign, but I was told it makes no difference. I have been in the process of backing up all of my dvd's, and was doing just fine, until I used these. It will start the burn process on DVD Shrink, and a few seconds into it actuall burning, the blank disc pops out, and I get the following error message..........
11:02:07 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
11:02:08 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
11:02:08 PM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-411S running
11:02:08 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:02:09 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:02:09 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:02:09 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:02:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2055119 (456:41.44, 4013MB)
11:02:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:02:30 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
11:02:30 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
11:02:30 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2055120 (2055120) = #2055120/456:41.45
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2055120 blocks [LITE-ON DVDRW LDW-411S]
--------------------------------------------------------------
11:02:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW LDW-411S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4208885760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2055120 | lead-out | 1 | 0x41 | 0x00
11:02:30 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
11:02:30 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:02:30 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
11:02:30 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
11:02:30 PM #20 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0BCC5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
11:02:30 PM #21 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0BCC4C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
11:02:30 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:02:31 PM #23 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
11:02:31 PM #24 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
11:02:31 PM #25 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
11:02:31 PM #26 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:02:44 PM #27 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x00D40000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
11:02:44 PM #28 CDR -1106 File Writer.cpp, Line 311
Power calibration error
11:02:44 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:02:44 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:02:44 PM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
11:02:44 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
11:02:44 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:02:44 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 2:24:34 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/23/2005 4:15:57 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Now I am not sure what all this means, if anyone can help, or has any suggestions?
|
Member
|
10. March 2006 @ 19:25 |
Link to this message
|
|
For one thing your drive doesn't recognise the dvd media. Get better media and upgrade the firmware. There are a few tricks you can do to upgrade that drive.
New build with goodies
|
|
hmaurice
Newbie
|
10. March 2006 @ 19:43 |
Link to this message
|
|
Can you tell me what the few tricks you are talking about are? What kind of software would you suggest?
|
AfterDawn Addict
6 product reviews
|
10. March 2006 @ 22:12 |
Link to this message
|
firstly you got lucky with your memorex media. most including me don't recommend memorex because they buy their media from various manufactures mostly bad and you never know what you're going to get.
I'm guessing your firmware is out dated since the media isn't being recognized and your drive is several years old. If you have dvd decrypter open it. If you don't dl it here http://mrbass.org/dvdrip/ click on tools then click on drive then click on check for firmware updates. it will tell you your current firmware version and take you to a page with the latest firmware update for your drive. DL the latest version and then flash your drive following all directions carefully. mainly remove any media from the drive and do not power down during the flash. very simple really. BTW the current f/w for your drive is FSOK.
i think one of the tricks johnyd was refering to is crossflashing your drive with LDW-811S f/w making it capable of burning at 8x. we won't cross that bridge yet.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 10. March 2006 @ 22:17
|
Member
|
11. March 2006 @ 06:35 |
Link to this message
|
|
@ Mort81 Couldn't have said it better myself.
New build with goodies
|
AfterDawn Addict
6 product reviews
|
11. March 2006 @ 06:40 |
Link to this message
|
|
hopefully it will get hmaurice up n going again.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
hmaurice
Newbie
|
12. March 2006 @ 17:02 |
Link to this message
|
So,can you please recomend some good blank media please? I updated firmware before, and tried again, it told me that there was no more updates for it. I have DVD Decrypter, but not sure how to use it. You see I had tried and failed for about a year to burn a DVD, then got on here, and someone walked me through it, with success, since then I have been able to backup my DVDs with DVD Shrink, and most of the time they work. I am not a tech genious, I am not too bad, but some things I have a hard time following. Like I said I had 16x's Memorex, and they all worked, so I bought a bigger spindle this time of memorex 8x's the only difference was the + and - on it. PLease hlpe, thank you!
|
AfterDawn Addict
6 product reviews
|
13. March 2006 @ 06:10 |
Link to this message
|
hmaurice,
What f/w did DVD Decrypter tell you that you currently have?
Recommended media is verbatim, taiyo yuden, maxell mij, sony mij, and fuji mij. mij = made in japan.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
hmaurice
Newbie
|
13. March 2006 @ 12:40 |
Link to this message
|
I went and got more media, by Sony, I put another DVD in, finished with DVD Shrink, said burn process started, like normal, and then a minute later the same error popped up and it spit disc out. I only know how to use Shrink, not Decrypter, I am at my wits end, now I have tons of software, and nothing to do with it. Please help me!
|
|
sytyguy
Senior Member
|
13. March 2006 @ 13:03 |
Link to this message
|
|
You never did answer Mort's question, concerning what firmware are you currently running? BTW, that log hmaurice posted indicated he was using RITEKG - 05, which are normally pretty good discs, in fact, that is what I used to use without failures.
hmaurice, I think the problem is with your burner, and it could be that you just need the latest firmware update.
Best of luck,
Rich
|
|
hmaurice
Newbie
|
13. March 2006 @ 13:20 |
Link to this message
|
|
I am not sure how to tell you what firmware I have, where would I find that information, I know I have "flashed" the drive to update it, and it was working well, I will tell you whatever you want to know, just tell me where to find the info, and what to look for!
|
|
hmaurice
Newbie
|
13. March 2006 @ 13:25 |
Link to this message
|
|
Also, from what I understand from others, my DVD r/rw drive is a bit out dated. Is there any brands, with model #'s that you can recommend to me I was thinking maybe about getting an external, unless internals are better???
|
|
hmaurice
Newbie
|
13. March 2006 @ 13:28 |
Link to this message
|
|
Ok, I finally caught the error that flashes across my screen for half a second.....power callobration error.........what does that mean?
|
AfterDawn Addict
6 product reviews
|
13. March 2006 @ 14:25 |
Link to this message
|
hmaurice,
this is from a post i made previously in this thread that tells you how to determine what f/w you currently have and also what the latest f/w is that is available for your drive.
Quote:
If you have dvd decrypter open it. If you don't dl it here http://mrbass.org/dvdrip/ click on tools then click on drive then click on check for firmware updates. it will tell you your current firmware version and take you to a page with the latest firmware update for your drive. DL the latest version and then flash your drive following all directions carefully. mainly remove any media from the drive and do not power down during the flash. very simple really. BTW the current f/w for your drive is FSOK.
The power calibration error could be a result of outdated f/w or poor quality media. I doubt it's the media since you have tried ritek G05's and sony's.
I would stay with an internal drive unless you do not have an open bay. I still believe we can get your drive up n burning.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435This message has been edited since posting. Last time this message was edited on 13. March 2006 @ 14:28
|
|
hmaurice
Newbie
|
13. March 2006 @ 14:37 |
Link to this message
|
|
Mort81, I did as you said in Decrypter, it said I had FSOK I then went to update it it read....Your drive's frimware is already the most updated do you wish to continue, I pushed yes....It then updated from FSOK to FSOK....I did this same precedure not too long ago, which is why it was already updated. Anyways, I am going to try to backup a DVD again, I hope it works this time!
|
AfterDawn Addict
6 product reviews
|
13. March 2006 @ 15:03 |
Link to this message
|
sounds like your drive has the most current f/w. what speed are you burning at? also use dvd identifier http://dvd.identifier.cdfreaks.com/ and tell us the manufactures and id's of your medias. give us the log of your last burn attempt.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
hmaurice
Newbie
|
13. March 2006 @ 17:23 |
Link to this message
|
This is one of messages I got after doing what you told me with the DVD Identifier.
Disc & Book Type (DVD+R)-(DVD+R)
Manufacturer name (CMC Magnetics Corp.)
Manufacturer ID (CMC Mag)
Media Type ID (E01)
Product Revision (not specified)
Blank Disc Capacity (Not supported by method 2)
Recording Speeds(1x-2.4x, 4x, 6x-8x)
(method 2 might not always detect all speeds)
** INFO : Drive = LITE-ON DVDRW LDW-411S - [FW FS0K] - [ATAPI]
** INFO : Write Capabilities = DVD+R DVD+RW
** INFO : Write Capabilities = DVD-R DVD-RW
** INFO : Disc = [DVD+R:CMC MAG-E01-000]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below
** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV]
** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Descriptor #2 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV]
|
|
sytyguy
Senior Member
|
13. March 2006 @ 18:17 |
Link to this message
|
Quote:
Manufacturer name (CMC Magnetics Corp.)
Manufacturer ID (CMC Mag)
CMC is amongst the worst discs one can purchase, so sorry to tell you that, but facts are facts.
Use Quality Media; avoid Memorex-CMC, get the good "stuff": Taiyo Yuden, Sony (MIJ), Verbatim, Ricoh or other top name products.
Best of luck,
Rich
|
AfterDawn Addict
6 product reviews
|
13. March 2006 @ 18:19 |
Link to this message
|
Quote:
Manufacturer name (CMC Magnetics Corp.)
Manufacturer ID (CMC Mag)
Media Type ID (E01)
This is most likely part if not all your problem. CMC Mags are garbage.
A couple other things to do and check is:
defragment hdd/s
remove any adware/spyware
make sure Nero is updated to latest vs. latest vs of nero6 is 6.6.1.4
What does dvd identifier say about your sony discs? They should either code out as manufactured by sony or yuden. If all else fails you can try using DVD Shrink and use DVD Decrypter to burn instead of Nero. Don't use the cmc mag discs. In DVD Shrink after you have clicked backup click on target device then under select backup target select ISO image file and burn with DVD Decrypter.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
sytyguy
Senior Member
|
13. March 2006 @ 18:26 |
Link to this message
|
Quote:
Manufacturer name (CMC Magnetics Corp.)
Manufacturer ID (CMC Mag)
Media Type ID (E01)
What does dvd identifier say about your sony discs?
Mort, the above is from DVD Identifier, and they are CMC (BAD).
It must be late, good buddy.
Later, Rich
|
|
Advertisement
|
|
|
AfterDawn Addict
6 product reviews
|
13. March 2006 @ 18:31 |
Link to this message
|
|
sytyguy,
that must have been on some other media. sony doesn't buy any of it's media from cmc mag that I am aware of.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
