|
|
|
Benq Dvdrw 1620w and Nero burning issues!
|
|
|
cjpro
Newbie
|
24. February 2006 @ 03:03 |
Link to this message
|
|
I have tried about 10 different fixes for this stupid burner and I keep throwing up coasters! It starts the burn and fails at 1%.
A few quick notes that may narrow it down
I have swapped IDE cables so it's not that.
It was working maybe no less then 3 weeks ago.
I have tried nero 6 & 7.
My other DVD burner works flawlessly.
I used to be able to burn to dvds at once with no issues.
I have 2gb of ram.
I have tried 2 different brands of media BOTH OF WHICH WORKED BEFORE.
I have tried different types of files to burn, from different hdds.
It almost always freezes at 1% but once at 3%
It does read media still and recognizes blanks, and discs with content on them as well.
Firmware is fully updated.
I can successfully rip/encode a dvd from this drive. I can play games/music/read date from this drive.
Note: I have tried different versions of Nero 7 as well. The earliest one, and the latest neither worked. I have uninstalled/reinstalled numerous times.
Honestly I have no clue what it could be I have read through this and cdfreaks and am getting no where. Any suggestions would be GREATLY appreaciated.
5:42:23 AM #27 CDR -1135 File Writer.cpp, Line 311
Write error
5:42:23 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:42:23 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:42:23 AM #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
5:42:23 AM #31 Text 0 File DVDR.cpp, Line 5586
Drive: BENQ DVD DD DW1620
Book Type request [gen]: ?Drive doesn't support changing Book Type for DVD-R
5:42:23 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
This text seems to bring up on every fail.
.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 2 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP DVD Writer 740b >Version: HI24 - HA 2 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP2504C atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 2 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 2 ID 1 DMA: On
DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b F: CDRom0
BENQ DVD DD DW1620 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095592kB)
Free physical memory: 1384MB (1417280kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.2.2006
UDF/ISO compilation
5:42:16 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:42:16 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:42:16 AM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:42:16 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:42:16 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:42:16 AM #6 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1620 running
5:42:16 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:42:16 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:42:16 AM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
5:42:17 AM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2284223 (507:36.23, 4461MB)
5:42:17 AM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
5:42:17 AM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
5:42:17 AM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:42:17 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2284224 (2284224) = #2284224/507:36.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2284224 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------
5:42:17 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4678090752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2284224 | lead-out | 1 | 0x41 | 0x00
5:42:17 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:42:17 AM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
5:42:17 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:42:17 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
5:42:17 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:42:17 AM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
5:42:17 AM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Seamless Link -> ON
5:42:17 AM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
5:42:17 AM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:42:17 AM #25 CDR -1207 File DVDR.cpp, Line 4772
Book Type automatically set to: Current recorder setting
5:42:23 AM #26 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0A9C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
5:42:23 AM #27 CDR -1135 File Writer.cpp, Line 311
Write error
5:42:23 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:42:23 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:42:23 AM #30 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
5:42:23 AM #31 Text 0 File DVDR.cpp, Line 5586
Drive: BENQ DVD DD DW1620
Book Type request [gen]: ?Drive doesn't support changing Book Type for DVD-R
5:42:23 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 10:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:44 AM (Adapter driver for rec)
Registry Keys:
This message has been edited since posting. Last time this message was edited on 24. February 2006 @ 03:27
|
|
Advertisement
|
|
|
|
Moderator
1 product review
|
24. February 2006 @ 08:56 |
Link to this message
|
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2284223 (507:36.23, 4461MB)
You are burning too close to the edge of the disc, set your target size in DVD Shrink or Recode to 4300 to avoid this.
Quote:
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
Not familiar with these discs, but suspect they are not great. Try some quality Verbatim, Taiyo Yuden or Sony, Fuji, Maxell (made in Japan).
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
and
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
The above two errors confirm that the discs are the culprit. In Media specific there should be actual numbers instead of all zeroes if your discs are being recognized. The second error states that your burner can't cope with what you want to do with the discs you are using.
Everything else looks fine, firmware is current...Nero is a little old, but shouldn't be the cause of your problems. If you want to update Nero to 6.6.0.18 here ya go:
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
The latest version of Nero 6 is actually 6.6.1.4, but has yet to have the wrinkles ironed out of it yet...so I would stick with 6.6.0.18 because it is known to be a working version.
Edit: I missed this one...
Quote:
DVD high compatibility mode: Yes
You are using DVD-R's which cannot be booktyped, disable high compatability mode when burning with -R's.
This message has been edited since posting. Last time this message was edited on 24. February 2006 @ 09:00
|
|
cjpro
Newbie
|
24. February 2006 @ 12:25 |
Link to this message
|
See honestly I would blame the media but right now im trying to different types of disc one no name and one is maxell. But both have/had worked on this dvd burner for quite some time up until recently. Also the options you suggest turning off, are those something you have to turn off or adjust in the first place? I have never adjusted anything with DVD Shrink. Every dvd is supposed to be set at 4.35gbs.
|
|
cjpro
Newbie
|
24. February 2006 @ 12:35 |
Link to this message
|
|
Oddly though dvd's are having trouble (blanks) being recognized and that is starting to make sense that it may be the media but not the medias fault. So if it is not recognizing blank media properly what would you suggest? That the drive is dead?
|
|
cjpro
Newbie
|
24. February 2006 @ 13:54 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HP DVD Writer 740b >Version: HI24 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP2504C atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 2 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 2 ID 1 DMA: On
DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b F: CDRom0
BENQ DVD DD DW1620 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095592kB)
Free physical memory: 1124MB (1151236kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.2.2006
ISO compilation
4:52:56 PM #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:52:56 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
4:52:56 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
4:52:56 PM #4 Text 0 File Writer.cpp, Line 113
Writer G: BENQ DVD DD DW1620 running
4:52:56 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:52:56 PM #6 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
4:52:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 265407 ( 58:58.57, 518MB)
4:52:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
4:52:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
4:52:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:52:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 265408 (265408) = #265408/58:58.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 265408 blocks [G: BENQ DVD DD DW1620]
--------------------------------------------------------------
4:52:57 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 543555584, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
265408 | lead-out | 1 | 0x41 | 0x00
4:52:57 PM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:52:57 PM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
4:52:57 PM #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
4:52:57 PM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
4:52:57 PM #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)
4:52:57 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:52:57 PM #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
4:52:57 PM #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: Seamless Link -> ON
4:52:57 PM #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
4:52:57 PM #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:53:22 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 323
G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x06610000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:53:22 PM #24 CDR -1135 File Writer.cpp, Line 302
Write error
G: BENQ DVD DD DW1620
4:53:22 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:53:23 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:53:23 PM #27 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
4:53:23 PM #28 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out
4:53:27 PM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 10:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
That is my latest with Nero 7. It was a data dvd I got 23% in and it stopped and said "write error"
|
Moderator
1 product review
|
24. February 2006 @ 14:00 |
Link to this message
|
You have to set the output size in DVD Shrink to 4300... Edit/Preferences/Preferences tab, in the drop down menu select custom and type in 4300.
To check the burn settings in DVD Shrink, after you've edited out what you don't want and hit backup, go to burn settings...it is the last tab in the new window. Make sure that the booktype and high compatability mode are not checked if you are using -R blanks.
Have you tried to create an ISO image with DVD Shrink and burn with DVD Decrypter or Imgburn?
|
|
cjpro
Newbie
|
24. February 2006 @ 14:06 |
Link to this message
|
|
Even data Dvds aren't working so I don't know what's up. My hp 740b is working fine though.
It just gets to me because it literally worked a couple weeks or less ago.
|
|
cjpro
Newbie
|
24. February 2006 @ 15:06 |
Link to this message
|
|
Data CD's do work however.
|
Moderator
1 product review
|
24. February 2006 @ 15:20 |
Link to this message
|
|
|
cjpro
Newbie
|
24. February 2006 @ 15:31 |
Link to this message
|
|
No. But the thing is that it was working fine the way it was before hand so I don't get why I would have to find a solution by doing another method.
|
|
cjpro
Newbie
|
24. February 2006 @ 16:37 |
Link to this message
|
|
Ousted the High compatability mode and voila! Great job on that! I really appreaciate it.
|
Moderator
|
15. March 2006 @ 09:55 |
Link to this message
|
|
thread teleported to relevant forum
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Advertisement
|
|
|
|
cjpro
Newbie
|
15. March 2006 @ 10:09 |
Link to this message
|
|
Still not fixed!
|
|
