|
|
|
Another day another Illegal disc
|
|
|
hoppla
Newbie
|
28. February 2006 @ 11:47 |
Link to this message
|
|
Hi dear experts! Here's a newbie who's got the same problem as many others. However I've followed every step that I've seen recommended.
________________________________
Here are the facts in the case:
1. Usually I use DVD Decrypter for burning but suddenly it failed. Moved to my second choice: Nero, it failed and I got a log.
2. I've used Memorex 8x DVD+R for a good while with no problem. The other night a got the illegal disc failure while burning from my good ol' batch of Memorex.
3. Tried Verbatim 16x still the same log.
4. Upgraded the firmware for the DVD writer to the latest available.
5. Went through the ASPI routine and fixed that. I actually had an error mess for it first when checking with Aspichk but after using Forceaspi Aspichk says it's good.
6. Burning CDr works fine, reading DVD media works fine.
7. Tried writing data as well as iso-files with the same result.
8. I also cleaned the lens.
9. Checked DMA successfully.
Is there anything left to do to make it work or should I rip the Philips driver out and let it sail from my 3rd floor balcony?
Could anyone please help me?
My Nero log looks like this:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999-09-10 12:06:00
ahead WinASPI: File 'C:\Program\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-07-28 16:51:12
Nero version: 6.6.0.1
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHT2040AT PL atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 183MB (187824kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.2.2006
Burn DVD Image
21:17:59 #1 Text 0 File Reader.cpp, Line 127
Reader running
21:17:59 #2 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+RW SDVD6004 running
21:17:59 #3 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
21:18:00 #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2142135 (476:01.60, 4183MB)
21:18:00 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
21:18:00 #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
21:18:00 #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:18:00 #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2142136 (2142136) = #2142136/476:1.61
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2142136 blocks [PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
21:18:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4387094528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2142136 | lead-out | 1 | 0x00 | 0x41
21:18:00 #10 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3 324 KB/s)
21:18:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:18:00 #12 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03BE5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
21:18:00 #13 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 22:19,483 (1339483ms) -> OK
21:18:00 #14 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: No
21:18:10 #15 SCSI -1046 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x08E50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
21:18:10 #16 CDR -1046 File Writer.cpp, Line 311
Illegal disc
21:18:10 #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
21:18:10 #18 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
21:18:12 #19 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
21:18:12 #20 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
21:18:12 #21 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3 324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 2002-10-01 18:15:18
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999-09-10 12:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-08-03 21:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
______________________________________________________________
Hoppla
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 11:57
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
28. February 2006 @ 11:56 |
Link to this message
|
For some reason your log keeps indicating a CD is present, its obviously NOT recognizing DVDs for some reason.
This is what I am questioning
Quote:
21:18:00 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 11:58
|
Moderator
1 product review
|
28. February 2006 @ 12:00 |
Link to this message
|
Quote:
Nero version: 6.6.0.1
Nero in ancient, get 6.6.0.18 here:
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
This error means that your burner doesn't like your discs...Since your firmware is the most current according the RPC1 and you've already admitted to using Memorex, my suggestion would be to try another brand as your good 'ole Memorex's have let you down. Try some Verbatim or Taiyo Yuden, Sony, Fuji, Maxell (made in Japan).
Try the Nero update and then both brand blanks.
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 12:02
|
|
hoppla
Newbie
|
28. February 2006 @ 12:02 |
Link to this message
|
|
Thanks for your reply. Where in the log do you see that it does interpret the media as a CD?
Is there any known fix for it?
As I said, the driver plays dvds without any hustle.
//
Oh, another answer while I was writing. Thanksalot.
About the version of Nero: it has worked perfectly and still does when writing cds. I've also tried DVD Decrypter which won't burn either. That goes for both Memorex and Verbatim.
As I said, I've already tried Verbatim (hailed by most) but it won't do it either. Any more suggestions?
Hoppla
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 12:07
|
AfterDawn Addict
|
28. February 2006 @ 12:09 |
Link to this message
|
Quote:
Quote:
--------------------------------------------------------------------------------
21:18:00 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
Its sitting right here, same place as my post above.
You were told to change Nero version once now for the second change to version of Nero recommended by loco.
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 12:11
|
|
hoppla
Newbie
|
28. February 2006 @ 12:12 |
Link to this message
|
|
Oh sorry, was a bit quick in reading. Well spotted.
Do you have any suggestion what might have happened?
Hardware or software?
Anyone heard of this before?
I'll update Nero, and try blanks and then get back to you guys. Thanks alot, at least I'm on the right track now.
Hoppla
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 12:15
|
|
hoppla
Newbie
|
28. February 2006 @ 12:48 |
Link to this message
|
Once again thanks for your kind support.
I've updated Nero as recommended but I still get the same error, here's the last log:
____________________________________________________________
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999-09-10 12:06:00
ahead WinASPI: File 'C:\Program\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 17:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHT2040AT PL atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 168MB (172156kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.2.2006
Burn DVD Image
23:31:53 #1 Text 0 File Reader.cpp, Line 127
Reader running
23:31:53 #2 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+RW SDVD6004 running
23:31:53 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
23:31:53 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2142135 (476:01.60, 4183MB)
23:31:53 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
23:31:53 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
23:31:53 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:31:53 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2142136 (2142136) = #2142136/476:1.61
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2142136 blocks [PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
23:31:53 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4387094528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2142136 | lead-out | 1 | 0x41 | 0x00
23:31:54 #10 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)
23:31:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
23:31:54 #12 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x09880600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
23:31:54 #13 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: No
23:32:21 #14 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04C50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
23:32:21 #15 CDR -1046 File Writer.cpp, Line 311
Illegal disc
23:32:21 #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
23:32:21 #17 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
23:32:21 #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
23:32:21 #19 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
23:32:21 #20 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
23:32:21 #21 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 2002-10-01 18:15:18
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999-09-10 12:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-08-03 21:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
__________________________________________________________________
I checked some other logfiles from other threads and found that the info about
"Write in overburning mode: NO (enabled: CD)"
does occur in several other posters logs. So is this the really the matter? The drive sounds like it doesn't find the disc alright although the info I get from Nero states that I have a DVD+R disc inserted in the drive before starting the burning process.
Further suggestions badly needed or I'll go crazy here.
Hoppla
|
Moderator
1 product review
|
28. February 2006 @ 13:09 |
Link to this message
|
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
I'm afraid that the burner just doesn't like those discs, and for some reason the MID isn't showing on the log.
Please DL DVD Identifier and run both Memorex and Verbatim's and post back the results.
DVD Identifier: http://www.afterdawn.com/software/video_software/dvd_tools/dvd_id...
|
|
hoppla
Newbie
|
28. February 2006 @ 13:11 |
Link to this message
|
|
Update:
Edit: you beat me to the clock... but here's what I wrote while you posted... I'll try your newest suggestions.
/I saw in another thread that there's a line or two that's showing if the media is read alright. I found these are missing in my log. It only says: "DVD+R" and nothing about what kind it is.
Does this point towards a firmware problem? Although Verbatim seems to be the shit, maybe my stack is faulty?
I'll have to buy a number of different discs and start from there. Any input is appreciated./
Hoppla
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 13:13
|
Moderator
1 product review
|
28. February 2006 @ 13:13 |
Link to this message
|
|
Please post above.
Edit: LOL
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 13:14
|
AfterDawn Addict
|
28. February 2006 @ 13:14 |
Link to this message
|
I may be missing something so can you point out where Nero says you are using DVD+R
|
Moderator
1 product review
|
28. February 2006 @ 13:16 |
Link to this message
|
Quote:
23:31:53 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
LOL gwen...right there under your CD error.
|
|
hoppla
Newbie
|
28. February 2006 @ 13:17 |
Link to this message
|
Got this from DVD identifier:
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:MCC-004-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [Not Available]
Manufacturer Name : [Mitsubishi Chemical Corp.]
Manufacturer ID : [MCC]
Media Type ID : [004]
Product Revision : [Not Specified]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
----------------------------------------------------------------------------
[ DVD Identifier V4.3.0 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
Was that good or bad news?
Can't try any Memorex as I'm out of them. Threw the last one in the garbage the other day... But I'll buy some new tomorrow. Now I've gotta go to bed. It's past midnight here in the cold north of Europe.
Night.
Hoppla
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 13:22
|
AfterDawn Addict
|
28. February 2006 @ 13:19 |
Link to this message
|
|
@LOCOENG, Me thinks it's time for a coffee break, whats the "go" with the CD comments, seems like it wont recognize it as DVD
This my seem a dumb question but when you open Nero are you clicking make DVD or Make VideoCD
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 13:21
|
|
hoppla
Newbie
|
28. February 2006 @ 13:24 |
Link to this message
|
I run in DVD mode alright. No doubt about that. Several other posters with the same issue has also the "CD"-info in their logs so I wouldn't think that it makes the big difference.
Also does not DVD Decrypter - ever stable - burn for me.
Hoppla
|
Moderator
1 product review
|
28. February 2006 @ 13:26 |
Link to this message
|
|
@Gwen
No quams with the CD thing, as of right now I don't know what the problem is...so anything will help.
@hoppla
MCC's are good, definately Verbatim....don't go and buy anymore Memorex, trust me. Dig one out of the trash and run it through the identifier.
Good night, sleep tight and may there be answers for you in the morning.
Edit: How about a DVDD log, got one to post?
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 13:27
|
|
hoppla
Newbie
|
28. February 2006 @ 13:30 |
Link to this message
|
|
Thanks both of you qwen & loco!
But please don't make me go through my trash... I'll try some DVD RW tomorrow instead.
May there be answers tomorrow.
Edit:
Device Information:
Current Profile: DVD+R
Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2 295 104
Free Space: 4 700 372 992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Maximum Write Rate: 2 704 KB/s (2.0x)
Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
Format Capacity:
Sectors: 2 295 104
Size: 4 700 372 992 bytes
Time: 510:03:29 (MM:SS:FF)
_____________________________-
Zzzzz
Hoppla
This message has been edited since posting. Last time this message was edited on 28. February 2006 @ 13:33
|
AfterDawn Addict
|
28. February 2006 @ 13:39 |
Link to this message
|
I could be way off track with this but it's only something "highlighted" so others can comment
Quote:
Burn process failed at 2.4x (3 324 KB/s)
Your disc indicates
Quote:
Maximum Write Rate: 2 704 KB/s (2.0x)
Are you trying to burn faster than your disc allows?
|
|
hoppla
Newbie
|
28. February 2006 @ 20:09 |
Link to this message
|
|
I don't have an option to burn at any other rate. It's only 2.4x that's possible. The disc says 16x. But I see what you mean. Don't think that's the issue tho.
Next?
Hoppla
|
AfterDawn Addict
|
28. February 2006 @ 21:28 |
Link to this message
|
|
From what source did you obtain the disc info above.
|
|
hoppla
Newbie
|
28. February 2006 @ 22:02 |
Link to this message
|
Hoppla
|
AfterDawn Addict
|
28. February 2006 @ 22:19 |
Link to this message
|
|
Something is strange, you say the disc is 16X whereas DVDDecrypter indicates it as 2X, I dont know why this is but you said DVDDecrypter stopped working suddenly, maybe someone can enlighten me.
|
Senior Member
|
28. February 2006 @ 22:22 |
Link to this message
|
It looks like there are some things not checked off in the Nero burn page
Quote:
TOCType: 0x00; Session Closed, disc not fixated
it should say session closed, disc fixated.
and
Quote:
DVD high compatibility mode: No
Make sure the box is checked that says Finalize disc no further writing is possible
and turn on the DVD high compatiblity mode.
That was from burning rom. You have to click on the options tab to see some of this stuff.
It might not help, but that was all i could see that might be a problem.
Also you could try a burn without aspi. Just use the killaspi program, and it will remove the aspi layers. Sometimes a new aspi installed over a corrupt one will cause problems. Its better to have no system aspi, or a working one, but not a corrupted one. Nero didnt report anything wrong with aspi according to that log. You can also check aspi with Nero info tool
It should come up green if aspi is ok, yellow if system aspi is missing, and red if system aspi is corrupted.
Also there could be something wrong with the image/movie you were trying to burn. Is the failure on this movie or file only?
Check out alkohol's guide on using Nero:
http://forums.afterdawn.com/thread_view.cfm/256436
Its a good thread, even if you think you know how to do a rip, its best to look thru that to see if you are having problems with some of your settings.
Also a blank disc needs to be in the drive before you open up the burn page, or it will not list the correct burn speeds in the burn pulldown menu.
Thats all i can see that might be a problem.
Die CMC Mag!!! |
|
hoppla
Newbie
|
1. March 2006 @ 00:51 |
Link to this message
|
Thanks for your input!
I'll go thru your checkpoints when home from office tonight. The aspi has gone thru killAspi so the old one was removed. I also believe that it came out green in Nero.
I'll try the High compability and No further writing possible (usually has this option of course but I slipped in those logs).
And if this don't work, what are the odds that the drive is fried? Nearly 1:1 i guess.
Hoppla
|
|
Advertisement
|
|
|
|
hoppla
Newbie
|
1. March 2006 @ 11:03 |
Link to this message
|
Hi all again.
Tonight I went thru the last steps that max could think of. The result was negative.
Could not obtain any new discs today so I erased an old TDK DVD+RW (Taiwan made) and tried to burn the image on that one. Sad/happy to say that it works like a charm! Happy because my burner is somewhat ok. Sad that I have a stack of markets' finest Verbatims to no use.
Guess I'll have to track down a brand that I can use. Could it be then that the firmware for my Philips SDVD6004 doesn't support the discs?
Anyway, thanks for your support and efforts to help me, while the solution was waiting in a cupboard right behind me.
Burn on y'all!
Hoppla
|
|
