|
|
|
Message Error-Failed to read from the file %s on Recode
|
|
|
mmadigan
Junior Member
|
1. March 2006 @ 06:38 |
Link to this message
|
|
I was initially recieving this error at the end of my burn. I deleted Nero and reinstalled and now the erroro occurs within 30 seconds of the burn beginning. It occurs if I try and copy an entire DVD or remake a DVD. I am pretty frustrated and help would be appreciated. Thanks in advance. The following is the error log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 369MB (378084kB)
Memory in use : 42
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.3.2006
NeroAPI
6:55:53 AM #1 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
6:55:53 AM #2 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
6:55:53 AM #3 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
6:55:53 AM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:55:53 AM #5 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:55:53 AM #6 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:55:53 AM #7 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode for Multisession
6:55:53 AM #8 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: No
6:55:53 AM #9 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:55:54 AM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544
6:55:54 AM #11 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
06:56:14 File burn_dvdfiles.cpp, Line 381
Failed to read from the file ^.
06:56:14 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed
06:56:14 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
06:56:14 File burner.cpp, Line 961
Failed to read from the file °Ý¯?.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
1. March 2006 @ 11:29 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 1. March 2006 @ 11:29
|
|
mmadigan
Junior Member
|
1. March 2006 @ 11:31 |
Link to this message
|
|
these are not copyprotected dvds. they are dvds of over the air basketball games from dvds burned on Humax tivo dvd recorder.
|
AfterDawn Addict
|
1. March 2006 @ 11:43 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 1. March 2006 @ 11:43
|
|
mmadigan
Junior Member
|
1. March 2006 @ 18:06 |
Link to this message
|
gwendolin, i uninstallled as requested adn reinstalled Nero from the site you provided and turned on the DMA as suggested adn the same error message came up. Help this is really frustrating.the following is the error log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom7
LITE-ON LTR-0841 E: CDRom8
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 383MB (392204kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.3.2006
NeroAPI
9:59:53 PM #1 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
9:59:53 PM #2 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
9:59:53 PM #3 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
9:59:53 PM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:59:53 PM #5 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:59:53 PM #6 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:59:54 PM #7 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode for Multisession
9:59:54 PM #8 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: No
9:59:54 PM #9 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:59:54 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544
9:59:54 PM #11 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
22:00:12 File burn_dvdfiles.cpp, Line 381
Failed to read from the file ^.
22:00:12 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed
22:00:12 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
22:00:12 File burner.cpp, Line 961
Failed to read from the file Àݯ?.
|
AfterDawn Addict
|
1. March 2006 @ 18:23 |
Link to this message
|
Quote:
Nero API version: 6.6.1.4
According to your log file you STILL have NOT installed the version of Nero I recommended.
|
|
mmadigan
Junior Member
|
2. March 2006 @ 00:52 |
Link to this message
|
According to my Nero Product center it indicates the installed version as 6.6.0.18 with the latest availalbe version being 6.6.0.14. Also when I down loaded the version from the site you provided it didn't include the Nero Recordeor Nerovision Express so I updated at the Nero site with the following:
update number Update-Package 2
NeroVision Express 3
Nero Recode 2
Nero ShowTime 2
Nero PhotoSnap
Nero MediaHome
Current version: 3.1.0.253.1.0.25
Release date: January 31st, 2006January 31st, 2006
Filesize: 37.63 MB (39465120)36.67 MB (38456328)
MD5 Checksumme: cf61c1de716287b514c853bcf646b56da36f8cf194f56ed808540978690bf3bb
Should I uninstall and try again? Thanks.
|
|
mmadigan
Junior Member
|
5. March 2006 @ 12:43 |
Link to this message
|
I uninstalled and tried to burn the dvds again. Same error occured. Since I am trying to put 2 dvds onto 1 I think I need to install update package 2 and then it shows on the log this version of Nero Nero API version: 6.6.1.4 rather than 6.6.1.18hich i downloaded form the suggested site given above. The following is the error log any suggestions would be appreciated. Thanks.
Version: 2.2.6.17
Project type: Remake a DVD
Target size: DVD5 (2282925)
16:29:46 File LangStreamPatcher.cpp, Line 56
Command table patching started...
16:29:46 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-800A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\default\My Documents\Nero Recode (19569410048 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
16:30:41 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [14821 vobus] 4418.88MB -> 4418.87MB [R 1.00]
Video: 4140.43MB, extra: 278.44MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 249.49MB [enabled]
Subpicture: 0 streams
16:31:13 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
16:31:14 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
16:31:14 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286467 sectors (2298496)
16:31:15 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286467 sectors (2262540 required)
16:31:15 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (4419.02MB obtained)
16:31:15 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 387MB (396984kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.3.2006
NeroAPI
4:31:14 PM #1 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
4:31:14 PM #2 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
4:31:14 PM #3 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
4:31:14 PM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:31:14 PM #5 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:31:14 PM #6 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:31:15 PM #7 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode for Multisession
4:31:15 PM #8 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: No
4:31:15 PM #9 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:31:15 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544
4:31:15 PM #11 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
16:31:33 File burn_dvdfiles.cpp, Line 381
Failed to read from the file ^.
16:31:33 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed
16:31:33 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
16:31:33 File burner.cpp, Line 961
Failed to read from the file ¨Ý¯?.
|
AfterDawn Addict
|
5. March 2006 @ 12:54 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 5. March 2006 @ 12:54
|
Senior Member
|
6. March 2006 @ 00:38 |
Link to this message
|
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Altough your LM03's aren't that bad (2nd class) your burner(lovely unit BTW) can't recognize them at all... It's not even trying to see it either... As you can see above it's completely empty. That is strange...
You should have something like this:
Quote:
Media Specific [16..63]:
00 00 00 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
Different numbering of course...
I also noticed you had InCD installed on your first log. Good jog you kept it out on your re-installs. InCD will clash with Nero big time.
|
|
mmadigan
Junior Member
|
6. March 2006 @ 18:20 |
Link to this message
|
Gwendolin,I uninstalled Nero as follows: Control Panel -add or remove program-listed Nero OEM & Nero Digital, uninstalled Nero OEM and then ran general clean tool adn reinstalled Nero from the site you listed. This left the Nero Record and other programs on my computer. Tried to burn the dvds as before and the following error occur and it appearss that it still shows Nero 6.6.1.4 still installed. Help should I tryanother program to burn dvds rather than Nero?
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Remake a DVD
Target size: DVD5 (2282925)
22:08:32 File LangStreamPatcher.cpp, Line 56
Command table patching started...
22:08:32 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-800A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\default\My Documents\Nero Recode (19475660800 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
22:09:17 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [14963 vobus] 4460.74MB -> 4458.68MB [R 1.00]
Video: 4177.59MB, extra: 281.08MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 251.86MB [enabled]
Subpicture: 0 streams
22:09:48 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
22:09:49 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
22:09:50 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286467 sectors (2298496)
22:09:51 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286467 sectors (2282925 required)
22:09:51 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (4460.88MB obtained)
22:09:51 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
----- Begin NeroAPI error log -----
*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 364MB (373508kB)
Memory in use : 42
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.3.2006
NeroAPI
10:09:50 PM #1 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
10:09:50 PM #2 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
10:09:50 PM #3 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
10:09:50 PM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:09:50 PM #5 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:09:50 PM #6 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:09:50 PM #7 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode for Multisession
10:09:51 PM #8 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: No
10:09:51 PM #9 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:09:51 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544
10:09:51 PM #11 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
22:10:09 File burn_dvdfiles.cpp, Line 381
Failed to read from the file ^.
22:10:09 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed
22:10:09 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
22:10:09 File burner.cpp, Line 961
Failed to read from the file °Ý¯?.
|
Senior Member
|
7. March 2006 @ 03:19 |
Link to this message
|
Everything seems to be fine but the burner is still not seeing the disc... Let me have a google about to see if i can figure out another possibility...
In the meantime have a go on a DVD-RW disc... You never know... ;)
|
|
mmadigan
Junior Member
|
7. March 2006 @ 04:42 |
Link to this message
|
Thanks any help would be appreciated. I will try a DVD-RW tonight. The error log still shows the version of Nero as Nero API version: 6.6.1.4. Is this a problem?
|
|
mmadigan
Junior Member
|
7. March 2006 @ 17:03 |
Link to this message
|
Well i uninstallled Nero, used the cleanup tool and reinstalled both packages and finally have the right version installed, Nero API version: 6.6.0.18. The dvd begins to burn and an hour and half later the dreaded Failed to read from the file error message appears. I am at the end of my rope. Here is the log and any suggestions would be greatly appreciated before I revert to my hammer to fix the problem!!
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Remake a DVD
Target size: DVD5 (2282925)
18:48:58 File LangStreamPatcher.cpp, Line 56
Command table patching started...
18:48:58 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-800A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\default\My Documents\Nero Recode (19217645568 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
18:49:07 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [14821 vobus] 4418.88MB -> 4418.87MB [R 1.00]
Video: 4140.43MB, extra: 278.44MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 249.49MB [enabled]
Subpicture: 0 streams
18:49:10 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
18:49:11 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
18:49:11 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286467 sectors (2298496)
18:49:12 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286467 sectors (2262540 required)
18:49:12 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (4419.02MB obtained)
18:49:13 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
18:49:26 File vob_record.cpp, Line 643
DirectBurn offset: VTS_01_1.VOB 112
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 382MB (391584kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.3.2006
NeroAPI
6:49:12 PM #1 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
6:49:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
6:49:12 PM #3 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
6:49:12 PM #4 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:49:12 PM #5 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
6:49:12 PM #6 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
6:49:12 PM #7 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No
6:49:12 PM #8 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:49:12 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
6:49:12 PM #10 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
6:49:26 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 0. Length: 592
6:49:26 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1869
Reserved start fragment at 0
6:49:26 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 592. Length: 64
6:49:26 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_1.VOB at sector 656
7:10:27 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)
7:10:27 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_2.VOB
7:10:27 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_2.VOB at sector 524943
7:30:53 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)
7:30:53 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_3.VOB
7:30:53 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_3.VOB at sector 1049230
7:51:14 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors)
7:51:14 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_4.VOB
7:51:14 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_4.VOB at sector 1573517
8:11:34 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors)
8:11:34 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_5.VOB
8:11:34 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_5.VOB at sector 2097804
8:12:53 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_5.VOB of size 68988928 bytes (33686 sectors)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
20:13:02 File burn_dvdfiles.cpp, Line 381
Failed to read from the file ^.
20:13:02 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed
20:13:02 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
20:13:02 File burner.cpp, Line 961
Failed to read from the file °Ý¯?.
|
|
mmadigan
Junior Member
|
8. March 2006 @ 04:49 |
Link to this message
|
This morning I tried to copy entire disk in Nero Express. The burn was successsful. Used the same media as I used above and was copying from the same disk I was trying to copy from in Nero Recode. This seems awful strange why I can't burn successfully in Nero Recode.
|
|
mmadigan
Junior Member
|
8. March 2006 @ 16:28 |
Link to this message
|
Permiggs I tried to burn to DVD-RW this evening with the same results. Dreaded error message!Earlier this morning I copied an entire disk in Nero Express and it worked but it doesn't work in Nero Recode.Also I noticed in the Nero Recode 2 Recoding & Burning window in the status box for frames/sec it was 0.00. I have attached the latest error log. I am not sure where i go from here.
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Remake a DVD
Target size: DVD5 (2282925)
18:46:52 File LangStreamPatcher.cpp, Line 56
Command table patching started...
18:46:52 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-800A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\default\My Documents\Nero Recode (20454211584 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
18:47:16 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [14821 vobus] 4418.88MB -> 4418.87MB [R 1.00]
Video: 4140.43MB, extra: 278.44MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 249.49MB [enabled]
Subpicture: 0 streams
18:47:19 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
18:47:20 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-RW
18:47:20 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286467 sectors (2298496)
18:48:00 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286467 sectors (2262540 required)
18:48:00 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (4419.02MB obtained)
18:48:00 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
18:48:13 File vob_record.cpp, Line 643
DirectBurn offset: VTS_01_1.VOB 80
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 400MB (410012kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.3.2006
NeroAPI
6:47:21 PM #1 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
6:47:21 PM #2 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
6:47:21 PM #3 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-800A, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
6:47:21 PM #4 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:47:21 PM #5 Text 0 File DVDMinusRW.cpp, Line 269
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
6:47:59 PM #6 Text 0 File DVDR.cpp, Line 2571
Recording mode: Restricted Overwrite Mode
6:47:59 PM #7 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
6:47:59 PM #8 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No
6:47:59 PM #9 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2FFFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:48:00 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
6:48:00 PM #11 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2x (2,770 KB/s)
6:48:13 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_1.VOB at sector 624
7:08:37 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)
7:08:37 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_2.VOB
7:08:37 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_2.VOB at sector 524911
7:28:59 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)
7:28:59 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_3.VOB
7:28:59 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_3.VOB at sector 1049198
7:49:20 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors)
7:49:20 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_4.VOB
7:49:20 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_4.VOB at sector 1573485
8:09:41 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors)
8:09:41 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2241
Added extra file VTS_01_5.VOB
8:09:41 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_5.VOB at sector 2097772
8:10:59 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2629
Finished writing file VTS_01_5.VOB of size 68988928 bytes (33686 sectors)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
|
AfterDawn Addict
|
8. March 2006 @ 21:22 |
Link to this message
|
Quote:
Recording mode: Restricted Overwrite Mode
I havent been doing logs for all that long so I dont know what this means as I have NEVER seen it before.
Maybe someone will come along and explain it then we'll both be wiser.
You are using a RW, are you erasing disc before burning?
|
|
mmadigan
Junior Member
|
9. March 2006 @ 01:12 |
Link to this message
|
Gwendolin, in reviewing the previous posted logs the following was listed for the recording mode-
Recording mode: Sequential Recording Mode for Multisession
The DVD-RW was newly opened so I didn't erase it first before trying this burn. I will earse adn try again. Thanks.
|
Senior Member
|
9. March 2006 @ 08:25 |
Link to this message
|
|
Really, everything IS fine there... But the media is still invisible to the burner... What bugs me tough is that it works on Express...
Could that be a corrupted Recode file?
|
|
mmadigan
Junior Member
|
9. March 2006 @ 08:42 |
Link to this message
|
Permiggs I don't know if this will be helpful but attached is the log from the successful burn in express. Also this morning when I was trying to use Nero Recode with the erased DVD-RW after I imported the 1st dvd and went to import the part of the 2nd dvd i wanted to burn my machine kept freezing up and I would have to re-boot. Thanks for all of your assistance.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW 16X16X >Version: YTS1 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 263MB (269452kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.3.2006
DVD-Copy on the fly
7:02:10 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
7:02:10 AM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running
7:02:10 AM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 68048 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start 68064 Len 48 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start 68128 Len 2206720 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
7:02:10 AM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 3 allowed to copy
1: 0 - 68048 = 68048, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2: 68064 - 68112 = 48, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3: 68128 - 2274848 = 2206720, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
7:02:10 AM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using DVD-R/RW media
7:02:11 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2274847 (505:31.22, 4443MB)
7:02:11 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:02:11 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
7:02:11 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:02:11 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 68064 (68064) = #68064/15:7.39
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 68048 blocks [SONY DVD RW DRU-800A]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #68064 + 64 (64) = #68128/15:8.28
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48 blocks [SONY DVD RW DRU-800A]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #68128 + 2206720 (2206720) = #2274848/505:31.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2206720 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------
7:02:11 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-800A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 3:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 139395072, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 139395072 139395072 139526144, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 139526144 139526144 4658888704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
68064 | 2 | 0 | 0x41 | 0x00
68064 | 2 | 1 | 0x41 | 0x00
68128 | 3 | 0 | 0x41 | 0x00
68128 | 3 | 1 | 0x41 | 0x00
2274848 | lead-out | 1 | 0x41 | 0x00
7:02:11 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 1. Length: 68064 -> 68048.
7:02:11 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 2. Length: 64 -> 48.
7:02:11 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
7:02:12 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:02:12 AM #16 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
7:02:12 AM #17 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
7:02:12 AM #18 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No
7:02:12 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:06:13 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:06:21 AM #21 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 1: Last written address was 68047
7:06:21 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #68064): write at #68064
7:06:21 AM #23 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
7:06:21 AM #24 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
7:06:21 AM #25 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 68064
DVD high compatibility mode: No
7:06:21 AM #26 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:06:29 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:06:38 AM #28 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 2: Last written address was 68111
7:06:38 AM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #68128): write at #68128
7:06:38 AM #30 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
7:06:38 AM #31 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
7:06:38 AM #32 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 68128
DVD high compatibility mode: No
7:06:38 AM #33 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:38:14 AM #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:38:26 AM #35 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 3: Last written address was 2274847
8:39:22 AM #36 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:00:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
Senior Member
|
9. March 2006 @ 09:05 |
Link to this message
|
|
That is soo strange... According to the log, the media is not recognisable by the firmware, but it still burnt the whole 3 tracks...
IMHO it's got to have something to do with that Recode file...
|
|
mmadigan
Junior Member
|
9. March 2006 @ 09:46 |
Link to this message
|
|
Do you or Gwendolin have any suggestions where I could download another version of Recode adn try to ninstall and reinstall Recode to see if this makes a difference?
|
AfterDawn Addict
|
9. March 2006 @ 12:04 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 9. March 2006 @ 12:04
|
|
mmadigan
Junior Member
|
11. March 2006 @ 04:09 |
Link to this message
|
Help i am back where I started adn it is driving me crazy. I tried to re=install Nero Recode from the site provided by Gwendolin.After I did this I tried to burn the same dvds with the same media adn it would sttart the process adn after about 30 seconds the burn would end adn the dreaded failed to read from file error message would appear. I reviewed the error log and it showed that Nero API version: 6.6.1.4 was now installed. I uninstallled all of the Nero applications and ran the general clean tool provided by Gwendolin below and reinstalled Nero again try to burn adn the same thing happened adn it still shows Nero API version: 6.6.1.4 as being installed. Try this uninstall clean an reinstall process a few more times. When I tried to remake the dvd by importing certain parts from 2 dvds my machine kept freeexzing when I went to import form the 2nd dvd. In fact I could not get out of Nero or reboot my machine using the Ctrl-alt-del keys.So I re booted adn tried to copy the entire dvd and my machine did not freeze but I recieved the failed to open file error message. Ithe error log shows that Nero version Nero API version: 6.6.1.4 is still installed. The error log is attached. I am at a loss adn do not know what to do. Should I try some other burning program? Thanks for any assistance you can give me.
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Copy entire DVD
Target size: DVD5 (2282925)
07:52:43 File LangStreamPatcher.cpp, Line 56
Command table patching started...
07:52:43 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-800A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\default\My Documents\Nero Recode (20127514624 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
07:52:48 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [336 vobus] 62.97MB -> 19.03MB [not compressable]
Video: 0.00MB, extra: 19.03MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [disabled]
VTS_01 Title Vobs [573 vobus] 170.50MB -> 170.49MB [R 1.00]
Video: 159.81MB, extra: 10.68MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 9.56MB [enabled]
Subpicture: 0 streams
07:53:18 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
07:53:19 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-RW
07:53:20 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286470 sectors (2298496)
07:53:57 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286470 sectors (97062 required)
07:53:57 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (189.57MB obtained)
07:53:57 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV4084H atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-0841 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW 16X16X D: CDRom0
LITE-ON LTR-0841 E: CDRom1
SONY DVD RW DRU-800A F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654832kB)
Free physical memory: 394MB (403620kB)
Memory in use : 38
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2006
NeroAPI
7:53:20 AM #1 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
7:53:20 AM #2 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
7:53:20 AM #3 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
7:53:20 AM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:53:20 AM #5 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:53:20 AM #6 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:53:21 AM #7 Text 0 File DVDMinusRW.cpp, Line 300
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
7:53:57 AM #8 Text 0 File DVDR.cpp, Line 2707
Recording mode: Restricted Overwrite Mode
7:53:57 AM #9 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: No
7:53:57 AM #10 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 2FFFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:53:57 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544
7:53:57 AM #12 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 2x (2,770 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
07:54:17 File burn_dvdfiles.cpp, Line 381
Failed to open the file ^.
07:54:17 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed
07:54:17 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
07:54:17 File burner.cpp, Line 961
Failed to open the file 8ݯ?.
|
|
Advertisement
|
|
|
Senior Member
|
11. March 2006 @ 10:18 |
Link to this message
|
Can't understand... Everything is fine apart from the specific media bit.
Here you have one i done this afternoon:
Quote:
====== *** Nero Burning ROM, History File *** ======
1A
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 06/03/2006 22:44:58
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVD-16X OEM316B >Version: 1.00 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD-16X OEM316B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 1 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 2 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 3 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 4 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 3 ID 1 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3tiger Port 3 ID 2 DMA: Off
=== CDRom-Device-Map ===
DVD-16X OEM316B D: CDRom0
TSSTcorp CD/DVDW TS-H552B E: CDRom1
SCSIVAX DVD/CD-ROM F: CDRom2
SCSIVAX DVD/CD-ROM G: CDRom3
SCSIVAX DVD/CD-ROM H: CDRom4
SCSIVAX DVD/CD-ROM I: CDRom5
SCSIVAX DVD/CD-ROM J: CDRom6
Generic STEALTH DVD K: CDRom7
Generic STEALTH DVD L: CDRom8
Generic STEALTH DVD M: CDRom9
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 959MB (982512kB)
Free physical memory: 584MB (598064kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.3.2006
UDF/ISO compilation
13:51:22 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
13:51:23 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
13:51:23 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
13:51:23 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
13:51:23 #5 Text 0 File Reader.cpp, Line 127
Reader running
13:51:23 #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
13:51:23 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
13:51:23 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
13:51:23 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
13:51:23 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2141471 (475:52.71, 4182MB)
13:51:23 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
13:51:23 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+RW
Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48
Disc Application Code: 0, Extended Information Indicators: 1
13:51:23 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:51:24 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2141472 (2141472) = #2141472/475:52.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141472 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
13:51:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4385734656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2141472 | lead-out | 1 | 0x41 | 0x00
13:51:24 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:51:24 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
13:51:24 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:51:24 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
13:51:24 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:51:24 #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RITEK...
Media type ID: 004
Product revision number: 48
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
13:51:24 #22 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RITEK...
Media type ID: 004
Product revision number: 48
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
13:51:24 #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RITEK...
Media type ID: 004
Product revision number: 48
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409
23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
13:51:24 #24 Text 0 File DVDR.cpp, Line 7042
Drive: TSSTcorp CD/DVDW TS-H552B
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
13:51:24 #25 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
13:51:24 #26 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
14:04:41 #27 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2141472 (20AD20h), lenght 0 blocks
14:04:41 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
14:04:42 #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 19:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
As you can see my burner specifically recognizes my -RW Ritek.
|
|
