|
|
|
Couple of Softmod Questions
|
|
|
Blade6669
Newbie
|
12. March 2006 @ 15:02 |
Link to this message
|
|
I have been using a premad softmod/linux installer found on the Action Replay site, and have encountered a couple of problems I could use a hand on. 1st, friends softmodded xbox has taken to saying that it wants to sign on to Xbox live and update, what is going on, and how do I repair this situation? Also, I read an earlier post on the error code 16, which I am currently having problems with, I installed evox, then overwrote that with unleashx and now am getting the Error Code 16 [I] Nooooo!!!! [I] How can I fix this problem?
Livin' on tha' fine edge of Blade Alchemy
|
|
Advertisement
|
|
|
|
|
TheReturn
Suspended due to non-functional email address
|
13. March 2006 @ 04:58 |
Link to this message
|
|
16 - dashboard - Clock cannot be set.
Basically it comes down to this. Error 16 has to do with not finding the menu setting with which you can set the clock of the hdd. This happens to a lot of people that erase their hdd (original/upgraded) or MS dashboard files and after that they don't immediatly install the hdd but leave the xbox without power longer than 5 hours.
It's all about the hdd can't find the menu with which it can set the clock. This is mostly because the xbox hdd is empty (you removed dashboard or fux0red it via ftp). The problem arises when xbox searches for menu to set clock with, can't find it and voila: error 16. Well read on please!
So you have an error 16 huh? Don't worry "nothing" is broken!
You have an xbox hdd that is locked. And normally you can boot in original and modded mode. Retail or upgraded doesn't matter. You start playing around with xboxdash.xbe etc. using ftp programs. While doing this you "accidently" remove your MS dashboard and also your alternate dashboard (Evox, etc.) so there is no dash anymore on the xbox hdd.
You end the ftp session and after that you shut off your xbox. Normally when you would start up again it gives you an error 13/14 ( no dashboard found). No worries with a slayer Evox cd (and a hardmod), all is ok. BUT this is only WITHIN 3 hours or so.
This is because the internal clock of the xbox will only be kept alive by the capacitors for only 3 or 4 hours. So when you leave your xbox unplugged from electricity for over 5 hours after you have played with the .xbe's AND you have removed your (ms and evo-x) dash from your xbox than you are fux0red. Why do you ask?
Why can't I boot from disc?
Its as follows Xbox starts booting==> (almost 1st thing a xbox does is) searches for internal clock==> doesnt find internal clock because there hasn't been any electricity on the xbox for 5 hours so battery that kept clock alive is empty and clock is gone==> searches for the proper dashboard menu to set clock with ==> doesnt find msdashboard or evo-x dashboard menu becuz you have removed it from the hdd for whatever reasons you had==> xbox gives error 16: cannot set clock.
So what do you do about it? Two options!
1. There are some bios'es around that allow the chip to boot past the clocksetting. (do a search!). So how do you get that bios on your chip because you cant boot to a flash program or something? Well you need to have an external flasher.
It seems the m8 bios will take care for you of booting past the clocksetting. Or use the latest Xecutor bios
2. This is the more easy and newbie friendly strategy
-Get a friend with a modded xbox.
-Unlock his hdd with eeprom management from a slayer evo-x cd.
-Than, place his hdd in your xbox.
-Boot with your chip on.
-Now the xbox DOES find a dashboard when you boot in original mode and you can set the time in the msdashboard clock settings.
-Shut off xbox and remove your friends hdd
-PLace his hdd back in his xbox and lock it again
-Install your hdd
-(clock has been set) So boot up with slayer cd.
-Install normally whatever you wanna install
-lock hdd
If you get an error 13 after this, please read up on the error 13 explanation!
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
Blade6669
Newbie
|
13. March 2006 @ 13:21 |
Link to this message
|
|
Right on, thanx Return, but I'm still looking for an answer to the second question, I have never even heard of the Xbox Live updating bit, so if anyone else might know something about that, please help.
Livin' on tha' fine edge of Blade Alchemy
|
Senior Member
|
13. March 2006 @ 13:36 |
Link to this message
|
|
I had this trying to sign into xbox live and update business when I re done my box at the weekend. In my case all it was was in the MS dash, my settings had change to enable auto sign in so when ever I turned my box in thats what it tried to do. Once I turned that off all was ok.
And i'd listen to what TheReturn says as he was very helpful in getting my box up and running :-)
xX Shinnster Xx
ub5crew
|
|
TheReturn
Suspended due to non-functional email address
|
13. March 2006 @ 15:03 |
Link to this message
|
Thank shinnster.
@Blade6669
I think hotswap is the solution to reinstall ms dash back to hdd. You need to have ms dash on PC and follow this guide.
Quote:
I've seen enough posts around here referring to hotswapping, but I haven't seen a good guide. So, without further ado, I present the art of hotswapping.
Why would I want to hotswap?
Two reasons. One is, you tried to do a softmod and fuxed it up, and now your xbox is giving you error 21. This will allow you to install the default MS dashboard files, and repair your box. Second is you don't wanna hack up a controller or buy an action replay, but still want to do a softmod. You can use this to copy the hacked gamesaves to your xbox.
WARNING: MAKE SURE YOU FOLLOW ALL INSTRUCTIONS HERE, AND HAVE SOME IDEA OF WHAT YOU'RE DOING. FAILURE TO DO THIS COULD RESULT IN A USELESS XBOX.
You will need:
Xbox
Torxx screwdrivers
a small phillips screwdriver
PC with at least one free slot for a hard drive
FatXExplorer (It's in french, but more stable than xplorer360)
http://dwl.xbox-scene.com/~xbox/xbox...TXExplorer.zip
OR
Xplorer360
http://dwl.xbox-scene.com/xbox360pc/harddr...rer360beta4.rar
1. Remove the four feet from the bottom of your xbox. Use the torxx screwdriver to remove the four screws. There are two more in the center, beneath the stickers. Take these out as well.
2. Take off the top cover. Use your torxx screwdriver to take out the two brass screws that are in the center holding the drive housing down.
3. Remove the section of casing with the harddrive in it.
4. Use the phillips screwrdriver to take out the four screws holding the HD in place. (You don't have to do this, but it makes getting at the data cable much easier)
5. Open up your PC, and make sure that you can plug the a data cable into the HD with the xbox's power cable still attached to the hard drive. Make sure your PC is already booted and logged in.
6. Now we've got everything ready. Making sure the a/v cable is attached to the xbox and that the power/data cables are hooked up to the hard drive, turn your xbox on. Wait a little bit to make sure the boot process has completed.
7. Being VERY careful not to jolt or shake the HD too much, disconnect the DATA cable from the harddrive WITHOUT powering off the xbox. Now plug in your PC's data cable.
8. Run xplorer360. Go to drive->open->harddrive or memcard
9. Xplorer360 SHOULD read the harddrive. If it doesn't, you may have to go to the device manager and have it scan for changes.
10. Once you've modified the harddrive as you like, BE SURE TO RECONNECT THE XBOX'S DATA CABLE TO THE HD BEFORE POWERING OFF YOUR XBOX. NOT DOING THIS CAN MAKE THE HD STAY UNLOCKED, WHICH RENDERS IT USELESS FOR YOUR XBOX. DON'T MESSAGE ME SAYING YOU FUXED YOUR BOX UP BY IGNORING THIS STEP.
11. Provided you didn't delete any important files, you should now be good to go.
According to the guide.
- You have a long IDE cable. One end connect to motherboard on PC. The other end is free
- Open your xbox and free the hdd. So you can easily move it. But hdd is still connect xbox
- Turn on the xbox, when you see ms logo appear under the big X, quickly remove the IDE cable on xbox hdd and connect the one from computer to it. Xbox still power on.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
This message has been edited since posting. Last time this message was edited on 13. March 2006 @ 15:04
|
Senior Member
|
13. March 2006 @ 15:35 |
Link to this message
|
|
You do like a hot swap don't ya dude :-)
xX Shinnster Xx
ub5crew
|
|
TheReturn
Suspended due to non-functional email address
|
13. March 2006 @ 17:51 |
Link to this message
|
|
@shinnster
For softmod xbox, backup all files on drive C and E to PC. And hotswap method is the best way to fix all problems with xbox. It does not matter what you did to hdd. Or even you delete all files on C and E.
As your experiences up to now, I think you already know this.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
This message has been edited since posting. Last time this message was edited on 13. March 2006 @ 17:53
|
|
Advertisement
|
|
|
Senior Member
|
14. March 2006 @ 08:17 |
Link to this message
|
|
i do agree, with my experiences of softmodding and trying to recover things, the easiest way to do it is hotswap, once you work out how to do it of course :-)
xX Shinnster Xx
ub5crew
|
|
