|
Thanks for the suggestion Tokijin,
I don't think my problem lies in the cd burning though I also tried your suggestion to us alcohol 120%
But the V12 inherently doesn't read CDR's until the firmware for the infinity is updated to at least v1.36
Anyway when I get to the memory card part of the upgrade the V12 doesn't run the matrix program? It just goes to the browser.
The Matrix instructions below.
Any more suggestion I can try?
Thanks
Tony
Preparing the Memory Card:
--------------------------
1) Burn Infinity Manager V1.36 to CD following the procedure explained inside the .zip file.
2) Make sure the memory card is formatted and inserted in the V1-V11 PS2.
3) Insert the Infinity Manager CD in the V1-V11 PS2, press reset and wait for the
Infinity Manager program to finish loading.
4) Go to "Memory Card Manager" and select "Install Infinity Manager".
After "Install Succeded" appears on screen, turn off the PS2 and remove the memory card.
The Memory Card is now ready and can be used to upgrade as many PsTwo as you like with the
new V1.36 firmware.
Upgrading the PSTWO:
--------------------
1) Install Infinity into the PsTwo following the installation diagrams.
2) Insert the memory card into the PsTwo and turn it on by pressins reset once.
3) Press and keep pressed the "TRIANGLE" button during boot to launch the Infinity
Manager from the memory card.
4) On the main screen, select "Update Firmware" and follow the onscreen instructions
to update the Infinity firmware.
3) When the "Upgrade Succeded" message appears on screen, you can turn OFF the PsTwo and
remove the memory card.
The PsTwo is now ready to be used.
|
