|
|
|
Nero stopped burning dvds for me!
|
|
|
amethystv
Newbie
|
16. March 2006 @ 21:38 |
Link to this message
|
|
I've been burning DVD's for a very long time, then just last week, it wouldn't burn any dvd's anymore saying there was an internal target failure. I updated the firmware for my dvr drive, but it didn't help. I have the log file, can someone please help me!
Nero version: 6.0.0.6 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-104> Version: 4.20 - HA 1 TA 0 - 6.0.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS CD-S400/A >Version: 2.2N - HA 1 TA 1 - 6.0.0.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 503MB (515436kB)
Free physical memory: 133MB (136496kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.3.2006
UDF/ISO compilation
12:24:57 AM #1 Phase 112 File dlgbrnst.cpp, Line 1852
DVD-Video files reallocation started
12:24:57 AM #2 Phase 114 File dlgbrnst.cpp, Line 1852
DVD-Video files reallocation completed (no file modified)
12:24:57 AM #3 Text 0 File Isodoc.cpp, Line 5506
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:24:57 AM #4 Phase 111 File dlgbrnst.cpp, Line 1852
DVD-Video files sorted
12:24:57 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
12:24:57 AM #6 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVD-RW DVR-104 running
12:24:57 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3821
First writeable address = 0 (0x00000000)
12:24:57 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3821
First writeable address = 0 (0x00000000)
12:24:57 AM #9 Text 0 File Burncd.cpp, Line 3088
Turn on Disc-at-once, using DVD media
12:25:13 AM #10 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286113 (508:01.38)
12:25:13 AM #11 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE
12:25:13 AM #12 Text 0 File DlgWaitCD.cpp, Line 1710
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
12:25:14 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286114 (2286114) = #2286114/508:1.39
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286114 blocks [PIONEER DVD-RW DVR-104 ]
--------------------------------------------------------------
12:25:14 AM #14 Text 0 File Burncd.cpp, Line 3323
Recorder and media-info:
Burning to PIONEER DVD-RW DVR-104 on a DVD-R media
12:25:14 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder PIONEER DVD-RW DVR-104 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387301376
12:25:14 AM #16 Phase 24 File dlgbrnst.cpp, Line 1852
Caching of files started
12:25:14 AM #17 Phase 25 File dlgbrnst.cpp, Line 1852
Caching of files completed
12:25:14 AM #18 Phase 36 File dlgbrnst.cpp, Line 1852
Burn process started at 2x (2,760 KB/s)
12:25:14 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
12:25:14 AM #20 Text 0 File dlgbrnst.cpp, Line 1712
Set remaining time: 28:15,548 (1695548ms) -> OK
12:25:14 AM #21 Text 0 File DVDR.cpp, Line 1418
Recording mode: Sequential Recording Mode
12:25:14 AM #22 Text 0 File Mmc.cpp, Line 18510
Set BUFE: supported -> ON
12:25:14 AM #23 Text 0 File DVDR.cpp, Line 1533
Start write address at LBA 0
DVD high compatibility mode: Yes
12:25:14 AM #24 Text 0 File Cdrdrv.cpp, Line 7842
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:25:16 AM #25 Text 0 File Writer.cpp, Line 318
00:25:16.176 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
12:25:24 AM #26 SCSI -1061 File Cdrdrv.cpp, Line 1364
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04500000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
12:25:24 AM #27 CDR -1061 File Writer.cpp, Line 335
Internal target failure
12:25:24 AM #28 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
12:25:24 AM #29 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
12:25:24 AM #30 Text 0 File dlgbrnst.cpp, Line 1712
Set remaining time: 0:00,000 (0ms) -> OK
12:25:24 AM #31 Text 0 File dlgbrnst.cpp, Line 1712
Set remaining time: 0:00,000 (0ms) -> OK
12:25:24 AM #32 Phase 38 File dlgbrnst.cpp, Line 1852
Burn process failed at 2x (2,760 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thank you!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
16. March 2006 @ 21:45 |
Link to this message
|
Quote:
Disc Manufacturer: CMC MA - G. AM3
This is horrible media and in my opinion is the cause of your failed burns. I would suggest trying some Verbatim, Taiyo Yuden or Sony (made in Japan)
Quote:
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Backs up what I was saying about your discs, your pioneer doesnt recognize them.
Your Nero is also very old, I would update from this link
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
Quote:
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: Off
Both these need to be on, go here for a guide
http://forums.afterdawn.com/thread_view.cfm/260038
you can safely burn at 4X, Cheers.
This message has been edited since posting. Last time this message was edited on 16. March 2006 @ 21:48
|
|
amethystv
Newbie
|
17. March 2006 @ 10:52 |
Link to this message
|
|
Thanks for your help, but it still won't work. It worked once, at1X but then when I tried again, it just won't do it, here's the log again. sorry thank you soooo much!
Project type: Copy entire DVD
Target size: DVD5 (2282925)
13:46:48 File LangStreamPatcher.cpp, Line 56
Command table patching started...
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 3 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 5 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 1 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 2 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 3 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 37 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 38 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 39 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 40 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 41 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 42 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 43 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 44 patched!
13:46:48 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 45 patched!
13:46:48 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: PIONEER DVD-RW DVR-104
Number of copies: 1
Write speed: 0 KB/s
Temp folder: D:\temp\temp (23690002432 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
13:46:51 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Menus Vobs [653 vobus] 77.28MB -> 76.73MB [R 0.98]
Video: 68.01MB, extra: 8.72MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 7.10MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.34MB [enabled]
VTS_01 Title Vobs [20046 vobus] 4156.99MB -> 4153.68MB [R 1.00]
Video: 3613.67MB, extra: 540.01MB
Audio: 3 streams
0. 0. Dolby Digital 5-ch English 461.45MB [enabled]
1. 1. Dolby Digital 2-ch English 6.09MB [enabled]
2. 2. Dolby Digital 2-ch English 28.21MB [enabled]
Subpicture: 3 streams
0. 0. English 5.11MB [enabled]
1. 1. French 0.00MB [disabled]
2. 2. Spanish 0.00MB [disabled]
VTS_02 Title Vobs [1286 vobus] 229.34MB -> 228.02MB [R 0.98]
Video: 209.96MB, extra: 18.07MB
Audio: 3 streams
0. 0. Dolby Digital 5.1-ch English 0.00MB [enabled]
1. 1. Dolby Digital 5.1-ch English 0.00MB [enabled]
2. 2. Dolby Digital 2-ch English 15.56MB [enabled]
Subpicture: 3 streams
0. 0. English 0.00MB [enabled]
1. 1. French 0.00MB [disabled]
2. 2. Spanish 0.00MB [disabled]
13:46:51 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
13:47:12 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
13:47:12 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286462 sectors (2298496)
13:47:13 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286462 sectors (2282927 required)
13:47:13 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.75MB (4464.02MB obtained)
13:47:13 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
13:47:14 File vob_record.cpp, Line 643
DirectBurn offset: VTS_01_0.VOB 160
13:47:18 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 77.28MB -> Expected 77.28MB -> Output 77.27MB
Finished error -0.00MB
Ratio encoded = 2
Original encoded = 651
Slide encoded = 0
StillImage encoded = 0
Output extra size = 8.73MB
Source video size = 68.54MB
Pictures Modified [I 1] [P 0] [B 20]
13:47:26 File NeroRecorder.cpp, Line 641
Burn failed (3)
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\Nero\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD-RW DVR-104> Version: 4.20 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-104 E: CDRom0
ASUS CD-S400/A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 503MB (515436kB)
Free physical memory: 140MB (143596kB)
Memory in use : 72
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.3.2006
NeroAPI
1:47:12 PM #1 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
1:47:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
1:47:12 PM #3 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
1:47:12 PM #4 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:47:13 PM #5 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
1:47:13 PM #6 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
1:47:13 PM #7 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No
1:47:13 PM #8 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:47:13 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
1:47:13 PM #10 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 1x (1,385 KB/s)
1:47:14 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 0. Length: 592
1:47:14 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1869
Reserved start fragment at 0
1:47:14 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 675
Reserved fragment at 592. Length: 112
1:47:14 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
Writing VTS_01_0.VOB at sector 704
1:47:26 PM #15 SCSI -1061 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x043AEE00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x05 0xD0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
1:47:26 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2113
Failed to write cache to disc at 1504
1:47:26 PM #17 Phase 179 File APIProgress.cpp, Line 276
Writing file to disc failed
1:47:26 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
Disc info:
Partitions: 2
#0: Start: 0, Size: 576
#1: Start: 592, Size: 96
1:47:26 PM #19 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x043AEE00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x05 0xD0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02
1:47:52 PM #20 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
1:47:56 PM #21 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
1:48:00 PM #22 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
1:48:04 PM #23 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9
1:48:04 PM #24 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
13:48:04 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 17. March 2006 @ 10:53
|
AfterDawn Addict
|
17. March 2006 @ 11:11 |
Link to this message
|
Good to see someone taking our advice, I see you have implemented MOST changes except your media. Memorex or CMC Mag discs are really poor quality and will cause problems, I think if you change your media your problems will be solved.
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1X is a little slow, try 4X with decent media.
Please give it a go, Cheers.
This message has been edited since posting. Last time this message was edited on 17. March 2006 @ 11:12
|
|
amethystv
Newbie
|
17. March 2006 @ 11:19 |
Link to this message
|
|
I tried to change to sony media, and I have nero set to use max burning speed, but it still will not work any other suggestions?
This message has been edited since posting. Last time this message was edited on 17. March 2006 @ 11:33
|
AfterDawn Addict
|
17. March 2006 @ 12:31 |
Link to this message
|
|
The last burn log you supplied shows CMC Mag media being used. It is crap media, Sony(made in Japan) is good but it's NOT made by CMC Mag.
|
|
Advertisement
|
|
|
|
amethystv
Newbie
|
20. March 2006 @ 09:50 |
Link to this message
|
|
Thanks for all your help. I appreciate it.
|
|
