|
|
|
What am I doing wrong?
|
|
|
dadawgnco
Newbie
|
30. March 2006 @ 13:16 |
Link to this message
|
|
I stopped trying to copy big booty bc I had too much booty than I could handle. So now I am just trying to copy a reg DVD5. I was using fujifilm media, but I changed bc nothing was working with that. It was error after error. Now I am using Maxell. The process is getting further than it was with the Fuji, however, there is still an error. It is a different error, but still an error. I updated the firmware and everything. Can someone please help, brobear or someone??? Thanks
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15j
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616T >Version: F308 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CXA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GSA-4166B D: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129840kB)
Free physical memory: 42MB (43900kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.3.2006
===== Disc-Copy over image - 1st step : Copy to image ...
5:53:45 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
5:53:45 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
5:53:45 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1236128 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
5:53:45 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1236128 = 1236128, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
5:53:45 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
5:53:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1236127 (274:41.52, 2414MB)
5:53:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
5:53:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
5:53:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:53:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1236128 (1236128) = #1236128/274:41.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1236128 blocks [Image Recorder]
--------------------------------------------------------------
5:53:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2531590144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1236128 | lead-out | 1 | 0x41 | 0x00
5:53:45 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
5:53:46 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2644
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:07:25 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06EF1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x0D 0x91 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
6:07:25 PM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
6:07:25 PM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1128
6:07:25 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:07:26 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
===== Disc-Copy over image - 2nd step : Burn the image ...
5:53:45 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
5:53:45 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
5:53:45 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1236128 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
5:53:45 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1236128 = 1236128, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
5:53:45 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
5:53:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1236127 (274:41.52, 2414MB)
5:53:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
5:53:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
5:53:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:53:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1236128 (1236128) = #1236128/274:41.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1236128 blocks [Image Recorder]
--------------------------------------------------------------
5:53:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2531590144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1236128 | lead-out | 1 | 0x41 | 0x00
5:53:45 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
5:53:46 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2644
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:07:25 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06EF1000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x0D 0x91 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
6:07:25 PM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
6:07:25 PM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1128
6:07:25 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:07:26 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 3:24:26 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
30. March 2006 @ 15:28 |
Link to this message
|
Are you getting the error during transcoding or burrning?
Are you reading the DVD your trying to copy with the Samsung DVD-ROM? Because in the Nero LOG DMA is set to off on that drive.
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: Off
This should be set to ON. I duno if this is your problem but it could be. To set it back to DMA: ON do the below.
Start/Control Panel/System/Hardware Tab/Device Manager/IDE Controlers
Once you clcik on the IDE controlers it will branch out with Primary and Secondary channels. Check each channel make sure they are in DMA mode if avvilable. If 1 is set to PIO mode then you need to place it in DMA mode. If it wont go into DMA mode then uninstall the channel that is in PIO mode and restart your computer. I will reinstall the channel and drive automaticly for you putting it back into DMA mode.
Like I said I dont know if this is the cause of the problem but you do need that drive in DMA mode.
|
|
dadawgnco
Newbie
|
30. March 2006 @ 19:16 |
Link to this message
|
|
OKay, thanks. I did that. Now the DMA is on... still same error, around the same spot. It is giving me an error while burning. Mind you, it is getting farther than it did yesterday, while using the fuji media. All this just started happeneing. I used to could burn just fine. I don't know what is going on. Please help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15j
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616T >Version: F308 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-32CXA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GSA-4166B D: CDRom0
SAMSUNG DVD-ROM SD-616T F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129840kB)
Free physical memory: 43MB (44996kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.3.2006
===== Disc-Copy over image - 1st step : Copy to image ...
11:56:08 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:56:08 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
11:56:08 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1236128 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
11:56:08 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1236128 = 1236128, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
11:56:08 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
11:56:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1236127 (274:41.52, 2414MB)
11:56:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
11:56:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
11:56:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:56:08 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1236128 (1236128) = #1236128/274:41.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1236128 blocks [Image Recorder]
--------------------------------------------------------------
11:56:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2531590144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1236128 | lead-out | 1 | 0x41 | 0x00
11:56:08 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
11:56:08 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2644
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:05:32 AM #14 SCSI -1128 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04021000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x0D 0x3A 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
12:05:32 AM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
12:05:32 AM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1128
12:05:32 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:05:33 AM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
===== Disc-Copy over image - 2nd step : Burn the image ...
11:56:08 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:56:08 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
11:56:08 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1236128 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
11:56:08 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1236128 = 1236128, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
11:56:08 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
11:56:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1236127 (274:41.52, 2414MB)
11:56:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
11:56:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
11:56:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:56:08 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1236128 (1236128) = #1236128/274:41.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1236128 blocks [Image Recorder]
--------------------------------------------------------------
11:56:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2531590144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1236128 | lead-out | 1 | 0x41 | 0x00
11:56:08 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
11:56:08 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2644
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:05:32 AM #14 SCSI -1128 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04021000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x0D 0x3A 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x00
12:05:32 AM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
12:05:32 AM #16 Text 0 File Reader.cpp, Line 385
Exception value: -1128
12:05:32 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:05:33 AM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 3:24:26 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Member
|
30. March 2006 @ 20:10 |
Link to this message
|
ok i dont read logs, but to help we need a little more than that. for starters wat movie r you trying to burn, wat type of DVD burner do you have, is your firmware updated, wat burning engine r u using.
ok i looked over the log and i dont no wat most of it meens but i did see alot of error notices
Quote:
5:53:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
5:53:46 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2644
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:07:25 PM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
6:07:26 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
5:53:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
6:07:25 PM #15 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
6:07:26 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832
Reading disc failed
well let me no the answers to the questions above and well try to do our best ^_^
|
|
dadawgnco
Newbie
|
30. March 2006 @ 21:05 |
Link to this message
|
|
I have an LG GSA-4166B. I am using 1.02 firmware. I am trying to copy a DVD that was recorded directly from video camera onto DVD. So yeah, I'm stumped.
|
AfterDawn Addict
|
30. March 2006 @ 21:25 |
Link to this message
|
|
Is this a mini DVD disc? I have heard people having trouble with mini-dvd's if you havent finilized the disc when trying to copy them to computer.
|
|
dadawgnco
Newbie
|
30. March 2006 @ 21:31 |
Link to this message
|
|
No, its a regular DVD. 4.7GB. I have burned them before on this burner all of a sudden..after about three weeks or a month of no use, it wont burn them any more.
|
|
laurenzo
Junior Member
|
30. March 2006 @ 23:09 |
Link to this message
|
Physical memory : 126MB (129840kB)
Free physical memory: 43MB (44996kB)
Memory in use : 65 %
To have a successful burn to need a minimum of 512 megs of RAM, so I would suggest that this is adding to your problem.
You could also try updating your Nero to this version http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 23:10
|
|
brobear
Suspended permanently
|
30. March 2006 @ 23:48 |
Link to this message
|
Just doing a quick glance, you need to go into the Device Manager and uninstall the Secondary IDE Channel and reboot. Then check to make sure all your optical drives are in DMA on. Usually uninstalling the Drive will do the trick, but I've found doing the IDE a more sure method. Remember, after rebooting, check to make sure the drives are in DMA On. Then uncheck disc at once, you don't need to be using that. As mentioned before, take a look at the sytem resources you're working with. Do you have enough PC to be burning DVDs? What are the specs on this PC? How much RAM total (we know there isn't much for use right now) If that 126 MB is all you have, you're in serious need of an upgrade. So, here's the list of what we need to know.
PC brand and model?
How much RAM, total and usable (check with taskmanager)?
What size hard drive and how much of it is free?
What CPU and what is the speed?
I thought someone had suggested you upgrade your Nero before. As pointed out here use the 6.6.0.18 because it's more stable than the last release. When installing the new version, use Neor's Clean Tools, you can get them at the Nero site. Clean up with Nero Clean Tools, then use Disk Cleanup in accessories, and then reboot before doing the install.
|
|
laurenzo
Junior Member
|
30. March 2006 @ 23:54 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 23:54
|
|
Advertisement
|
|
|
|
dadawgnco
Newbie
|
31. March 2006 @ 06:40 |
Link to this message
|
|
I just copied Bad Boys II. It created files in 30 minutes, and wrote it in 10. No problems. I also copied another movie. No problems. So I really think it is the DVDs that I am using. They aren't professional. They are copied directly from a video camera onto disc. I will have to check with them on what format they are using.
|
|
