|
How To FTP And How To Config Options On EvolutionX Dashboard & Skins. If You Lost MS Dashboard, Games, Apps And Emulators Menu On Evox Dash, Evox.ini Go Here.
|
|
|
TheReturn
Suspended due to non-functional email address
|
21. April 2006 @ 12:00 |
Link to this message
|
|
How To FTP
Here is the connection. Download and install FlashFXP on pc.
If you use router or hub:
PC connects to port1 of the router/hub with ethernet cable
Xbox connects to port2 of the router/hub with ethernet cable
If you use the crossover cable:
Connect PC to Xbox by using a crossover cable
ON dashboard of XBOX. Goto settings => mode "static". If you want to use DHCP, let me know.
IP 192.168.1.10
subnet 255.255.255.0
gateway 192.168.1.11
DNS is blank
Save.
ON PC. Goto START => SETTINGs => NETWORK CONNECTION. You will see LOCAL AREA CONNECTION, right click on it and select properties. The window pops up, then look for TCP/IP. select it and click on properties. Enter following
IP 192.168.1.11
subnet 255.255.255.0
gateway is blank
DNS is blank
Save.
Reboot xbox. OPen the FlashFXP on PC then select quick connection. Then type in.
connect to 192.168.1.10
port 21
pass xbox
user xbox
Then click connect.
Enjoy
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
This message has been edited since posting. Last time this message was edited on 22. April 2006 @ 06:42
|
|
Advertisement
|
 |
|
|
|
TheReturn
Suspended due to non-functional email address
|
21. April 2006 @ 20:14 |
Link to this message
|
|
How do I config options on Evox dash?
Ftp the evox.ini to PC. Then open it with notepad. You will see a lot of codes in there.
Why do I want to edit evox.ini and skin.ini?
Once you turn on your xbox and evox dash does not shows all options as normal. The evox.ini was corrupted.
Second, you want to organize the options on Evox dash as your way.
Third, you want to organize and to display time, clock, ip, temp, freespaces, etc... on Evox dash as your way.
What will happen if I mess up?
Your evox dash still boot even though you accidently deleted evox.ini. But you only see few options. If you mess up the skin.ini, that skin will not work. So evox loads the original skin.
Which part of evox.ini should I play around?
The [Menu] part on evox.ini for beginners. The whole evox.ini for advanced users only.
----------------------------------------------------------------------
Here is my [Menu] on evox.ini
[Menu]
Section "Root"
{
Section "Games"
{
AutoAddItem "e:\games\"
AutoAddItem "f:\games\"
SortAll
}
Section "Emulators"
{
AutoAddItem "e:\emus\"
AutoAddItem "f:\emus\"
SortAll
}
Section "Applications"
{
AutoAddItem "e:\apps\"
AutoAddItem "f:\apps\"
SortAll
}
Item "Launch DVD",ID_Launch_DVD
Item "Trainers",ID_trainer
Item "MS Dashboard",ID_MS_Dash
Section "System Utils"
{
Item "Settings",ID_Settings
Item "Flash BIOS",ID_Flash_Bios
Item "Backup",ID_Backup
Item "Skins",ID_Skins
}
Item "Reboot",ID_Quick_Reboot
Item "Power Off",ID_Power_Off
}
----------------------------------------------------------------------
There are a lot of stuffs to edit in skin.ini. I will post later.
For more questions, let me know.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
This message has been edited since posting. Last time this message was edited on 21. April 2006 @ 20:22
|
|
ct_06
Suspended due to non-functional email address
|
20. May 2006 @ 10:49 |
Link to this message
|
that does not work.. for me at least. i did everything exact and FlashFXP says no route to host... seriously i am screwed...
|
Junior Member
|
20. May 2006 @ 12:24 |
Link to this message
|
|
Turn your network card on..
matt
|
|
TheReturn
Suspended due to non-functional email address
|
20. May 2006 @ 12:37 |
Link to this message
|
|
@ct_06
What do you have? router or crossover cable?
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
Junior Member
|
20. May 2006 @ 12:46 |
Link to this message
|
|
I guess that would be good to know and not assume he has a router:D
matt
|
|
ct_06
Suspended due to non-functional email address
|
20. May 2006 @ 13:22 |
Link to this message
|
|
oh yea i guess i should have said im using crossover and i have it connected from xbox right to the comp... ive tried everything and it still wont work...
|
|
TheReturn
Suspended due to non-functional email address
|
20. May 2006 @ 17:53 |
Link to this message
|
|
That is weird. It should work. Which dashboard do you have?
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
ct_06
Suspended due to non-functional email address
|
20. May 2006 @ 19:59 |
Link to this message
|
|
ive got evolutionX
|
|
TheReturn
Suspended due to non-functional email address
|
21. May 2006 @ 06:46 |
Link to this message
|
|
If you have windows 98, it may not work.
Connect xbox to PC by using crossover cable. Set everything as above and save. Reboot xbox. Then go back to settings. Scan for FTP and Network options. Just change to YES if it is NO. Check to see if IP address changes. It should be:
IP 192.168.1.10
subnet 255.255.255.0
gateway 192.168.1.11
If they are changed, then NOT GOOD. Also check IP on PC too.
Reboot xbox. then fire up flash fxp and connect.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
ct_06
Suspended due to non-functional email address
|
21. May 2006 @ 16:58 |
Link to this message
|
|
i got windows xp not 98... and i tried that... nothing is working..... yes it is weird cuz i used your guide to FTP my friends xbox and it worked.. we did that today and then went back to my house and tried mine the same exact way we did his and it didnt work... i dont kno whats up with it but nothing is working...
|
|
TheReturn
Suspended due to non-functional email address
|
21. May 2006 @ 19:11 |
Link to this message
|
|
ok
Bring your xbox to your friend's house and try to ftp. If it does not work and your friend's xbox works, then you know you xbox does not work with ftp. So check options in settings of Evox.
If it works, then your xbox is ok. The PC has problems.
But first let find out if your xbox can ftp with your friend's computer.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
ct_06
Suspended due to non-functional email address
|
21. May 2006 @ 20:36 |
Link to this message
|
|
i never thought of that... will do. ill get back to ya to tell u if it works
|
|
DrXthirst
Suspended due to non-functional email address
|
23. May 2006 @ 13:51 |
Link to this message
|
|
okay , so , just follow the instructions above and then you should be able to FTP using a cross-over able? Because , I have tried b4 and nothing has worked...
|
|
TheReturn
Suspended due to non-functional email address
|
24. May 2006 @ 07:10 |
Link to this message
|
|
Yes. It should work.
Like ct_06 did at his friend's house and it works. But he can't get it works at home.
So you have to know little bit of computer too.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
PerryS
Newbie
|
29. May 2006 @ 09:43 |
Link to this message
|
|
I just kinda skimmed over this tut and it seems fine but if I don't find the IP automatically or whatever, and set it to the IP you provided, won't that mess up the connection with my modem? I'm using a router now (Modem > Router > PC) and haven't been able to get the xbox to connect to it, I'm almost positive it has something to do with DHCP, so later today I'm just going to connect with a crossover cable. Will I just have to change the Local Area Network settings each time I disconnect my Xbox or can I just make a whole new connection with different settings? Hope this makes since.
|
|
TheReturn
Suspended due to non-functional email address
|
29. May 2006 @ 12:22 |
Link to this message
|
ok you are using DHCP, then conect like this:
Keep the way PC connecting.
Connect ethernet cable to xbox and port 1-4 on router.
turn on xbox. then look ip of xbox.
turn on FlashFXP and connect to that ip.
Also list all ip on PC and xbox here too.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
PerryS
Newbie
|
29. May 2006 @ 21:03 |
Link to this message
|
|
OK I'm trying now to connect with a crossover cable.
Use the following IP address:
IP address: 192.168.0.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.100
I can sucessfully ping to 192.168.0.2 but when I try FlashFXP:
[R] Connecting to 192.168.0.2-> IP=192.168.0.2 PORT=21
(and immediately) [R] Connection failed (Connection refused)
I hope this was detailed enough... any help please?
|
|
TheReturn
Suspended due to non-functional email address
|
30. May 2006 @ 08:17 |
Link to this message
|
|
This is your xbox IP address:
IP address: 192.168.0.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.100
What is your PC IP?
It should be like this:
IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
Then connect again
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
PerryS
Newbie
|
30. May 2006 @ 13:35 |
Link to this message
|
|
Ok, this is gettting sooo very frustrating but here are ALL the specs that I have... they seem correct to me but maybe not.
XBOX NETWORK SETTINGS:
Enable : Yes
Type : Static
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Gateway : 192.168.0.100
Using the following IP address:
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default gateway : 192.168.0.100
Here's what I get from 'run > cmd > ipconfig /all' :
Physical Address : 00-07-E9-BC-20-F1
Dhcp Enabled : Yes [not sure how to change that, if it matters]
Autoconfiguration Enabled : Yes
IP Address : 192.168.2.104
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.1
DHCP Server : 192.168.2.1
DNS Servers : 68.87.68.162
68.87.74.162
Umm ok so I think the problem might have something to do with my router. Here is how I use the internet : cable modem -> linksys router -> computer.
Basically, I'm pretty sure that the router uses DHCP, hell I don't even know what DHCP is but it seems to be causing some trouble (refer to my "ipconfig /all")
When my router and everything is hooked up, I can go to internet explorer and type in 192.168.2.1 and it takes me to some linksys page with the password admin, no user name. I remember seeing something to do with DHCP but I don't know what to make of it.
So I guess I have two options : connect Xbox directly to PC with crossover cable (which I'd rather do; it seems cleaner, and less likely to mess up) or just connect the Xbox to another port on the router. Either way, I just have to change the network settings on the PC each time I use the internet (it just obtains the IP automatically and says it's assigned by DHCP).
If you need anymore information, I'll try to give what I am familiar with, I'm ready to FTP :p. Thanks.
|
Senior Member
|
31. May 2006 @ 10:15 |
Link to this message
|
|
i boot up my xbox and leave it on the unleashx dash and then go onto smart ftp and try to connect but it says:
SmartFTP v1.5.990.19
Resolving host name "192.168.0.2"
Connecting to 192.168.0.2 Port: 21
Connected to 192.168.0.2.
Server closed connection
can you help me please?
ftp is enabled on my xbox and everything. the ip must be right cos its connecting in the first place and then gets shut down.
im stuck
YOU win some, YOU lose some, either way I WIN
 |
|
TheReturn
Suspended due to non-functional email address
|
31. May 2006 @ 10:56 |
Link to this message
|
@PerryS
This is what fucked you up. Either change PC IP or xbox IP.
Quote:
Physical Address : 00-07-E9-BC-20-F1
Dhcp Enabled : Yes [not sure how to change that, if it matters]
Autoconfiguration Enabled : Yes
IP Address : 192.168.2.104
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.1
DHCP Server : 192.168.2.1
DNS Servers : 68.87.68.162
68.87.74.162
So change PC IP goto network connection => properties of local area network => properties of IP/TCP => set IP => save.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
This message has been edited since posting. Last time this message was edited on 31. May 2006 @ 11:02
|
|
TheReturn
Suspended due to non-functional email address
|
31. May 2006 @ 11:00 |
Link to this message
|
|
@backupguy
tell me what is your xbox IP and PC IP like PerryS listed above.
THE RETURN
Specialist in mod, hack, crack, download, copy, install, fix, repair game consoles and computers.
Click on the picture below to get files, guides and tutorials for Xbox.
|
|
PerryS
Newbie
|
31. May 2006 @ 13:59 |
Link to this message
|
Hey guess what... I'm an idiot. Jeez it seriously took me like 12 hours on the pc to figure out that I had an unknown firewall. The situation: my very controlling step-dad apparently had another firewall put on the computer. I always thought that I only had the Windows Firewall and on Network Connections it always said "connected; not firewalled". Oh well, I just happened to reboot to safemode to check if mIRC would work and guess what.. it did! So I just disabled Sygate Personal Firewall and everything worked beautifully. For your information, here are the settings that work:
XBOX:
IP : 192.168.0.2
Subnet : 255.255.255.0
Gateway : 192.168.0.10
What to use on PC :
IP : 192.168.0.3
Subnet : 255.255.255.0
Gateway : 192.168.0.10
Connecting directly with a crossover cable. Thankyou very much for your help TheReturn, even though it was totally my fault.
|
|
Advertisement
|
|
|
Senior Member
|
1. June 2006 @ 05:01 |
Link to this message
|
|
ok heres my ip's:
pc:
heres what i get in run/cmd:
ethernet adapter local area connection:
autoconfig ip address: 169.254.187.21
subnet mask: 225.225.0.0
default gateway: (blank)
ppp adapter tiscali broadband blaa blaa blaa...
my xbox ftp settings:
current ip: 169.254.187.22
enable: yes
ip address: 169.254.187.22
subnet mask: 225.225.225.0
default gateway: 167.254.187.21
dns 1: 0.0.0.0
dns 2: 0.0.0.0
ftp server:
enable:yes
user: xbox
pass: xbox
port: 21
max no. of users: 3
etc. etc.
please help me... i think there is something wrong with the ips on the xbox or something because the current ip and ip address' are the same....
YOU win some, YOU lose some, either way I WIN
|
