|
Pansat 3500
|
|
|
CPK2006
Junior Member
|
3. September 2006 @ 14:28 |
Link to this message
|
|
Any news guys? Last I heard in the beginning of August was the craxk was almost ready?
Thanks
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
3. September 2006 @ 15:53 |
Link to this message
|
|
Here is the latest RUMOR. Please understand that everything these days are rumors but this came from someone I have known a while with a least some inside contact. Still no way I can confirm it.
The RUMOR is that Blacklist has video working but with some minor bugs to work out. If true it should be a few more days. Some estimate the bin could be released tomorrow. Keep your fingers crossed and hope this rumor is right.
Jerry
|
|
CPK2006
Junior Member
|
3. September 2006 @ 16:22 |
Link to this message
|
|
That is good news Jerry. My local Sat guys closed down because of this so I hope I can find those codes online when they are out.
Thanks for SOME good news
CPK
Thanks
|
AfterDawn Addict
|
3. September 2006 @ 16:58 |
Link to this message
|
|
Once the bin file is actually released, it will probably be on every FTA site out there.
Jerry
|
|
CPK2006
Junior Member
|
5. September 2006 @ 19:37 |
Link to this message
|
|
Hey Jerry
On Tuesday night I found the latest keys. I entered them exactly into my PanSat 3500 (I am a computer geek...) and it didn't work.
PLZ HELP THIS NEWBIE
Thanks
|
AfterDawn Addict
|
6. September 2006 @ 06:14 |
Link to this message
|
|
@cpk2006, make sure you have the auto-roll option turned off right now. If its on and you enter keys it will probably try to change them again.
Jerry
|
|
CPK2006
Junior Member
|
6. September 2006 @ 06:21 |
Link to this message
|
|
Thanks Jerry
As a "NEWBIE" but a computer geek,where do I find this auto-roll option in my Pansat 3500?
Thanks
|
AfterDawn Addict
|
6. September 2006 @ 10:03 |
Link to this message
|
|
Not real sure on the 3500, but check the options in the main menu. You can also enter 8282 with the remote which should take you to the key area of the menu. Should be options for auto transponder update and auto roll of the keys. Thats the one to turn off.
Jerry
|
|
CPK2006
Junior Member
|
6. September 2006 @ 10:57 |
Link to this message
|
|
Hey Jerry
I found the auto transponder update and turned off. On my Pansat 3500sd I can't enter 8282 on the remote to find the auto roll keys, but through some searching through menus I found a section with four options:
1) Keycode on or off, I have on
2) Dishnet Autoroll on or off, I have on off
3) Bev Autoroll on or off, I have on on
4) GlobeCast Autoroll on or off, I have on
After changing this, enter codes it doesn't work. I tried unpluggin from power and it still doesn't work. I talked to a few places and they say these new keys don'r work for my Pansat 3500sd and that I need to buy a viewsat xtreem
Your help is greatly appreciated
Thanks
|
|
papakevin
Newbie
|
6. September 2006 @ 13:49 |
Link to this message
|
|
Hey guys. I have a 3500SD as well and the support site I use hasn't posted the new key yet. Are you sure the new key is available to fix the July 4th kill and it works? Just asking....
I'll check back later tonight for updates. Thanks everyone for a great message board!
Louisville, Kentucky
|
AfterDawn Addict
|
6. September 2006 @ 14:35 |
Link to this message
|
|
CPK2006, for right now and until a new bin file comes out, I would shut all 4 of those options OFF. That way any information or keys you enter manually will stay that way.
Papakevin, these keys are only for the few local free channels right now. Everyone is still waiting for the new bin fix to be posted.
Jerry
|
|
papakevin
Newbie
|
6. September 2006 @ 17:59 |
Link to this message
|
|
Thanks for the update Jerry - I appreciate the information. Any word or update on when the rest of the channels might be up and working? NFL Football starts tomorrow and it would be great to watch any game this Sunday... thanks.
Louisville, Kentucky
|
AfterDawn Addict
|
8. September 2006 @ 05:47 |
Link to this message
|
|
Just some extra information for everyone::
The PPV channels reported coming back on seem to be increasing. The suggestion is to delete all channels and do a re-scan to see what is working. The PPV channels working are some of the VOD channels in the 5000 range. Doesn't hurt to check. Make sure you have the newest bin and keys installed. We don't know how long these will last before going out again.
Jerry
|
|
papakevin
Newbie
|
8. September 2006 @ 06:28 |
Link to this message
|
|
Jerry - Any "hints" on where I can find the latest and greatest bin file? My guy has not updated his site (probably because it's not 100%) but anything is better than nothing. Thanks.
Louisville, Kentucky
|
AfterDawn Addict
|
8. September 2006 @ 08:51 |
Link to this message
|
Both Pansat sites are in the process of updating servers so try this one. Look in the FTA receiver files section and then find the Pansat section. The last files should be dated around the middle of June. Keys are also listed on the front of the home page.
http://www.hashhu.com.
Jerry
|
|
papakevin
Newbie
|
8. September 2006 @ 11:23 |
Link to this message
|
|
Thanks Jerry. You rock!
Louisville, Kentucky
|
AfterDawn Addict
|
8. September 2006 @ 14:46 |
Link to this message
|
|
No problem, Hope you get a few of those VOD channels for a while. At least that would be some movies to watch.
Jerry
|
|
CPK2006
Junior Member
|
8. September 2006 @ 16:44 |
Link to this message
|
|
Jerry
I loaded the keys and it didn't work. Funny thing since you directed me I have found three different keys in the past 24 hours. I found two on www.hashhu.com
Now I hear that I need bin file 3.53 and after that it is all good. But I can't find where to get the file anywhere
Thanks
|
AfterDawn Addict
|
8. September 2006 @ 18:29 |
Link to this message
|
|
|
papakevin
Newbie
|
9. September 2006 @ 00:43 |
Link to this message
|
Is the bin 353 fix a complete fix or just a partial one? I've got local and some of the VOD (thanks again Jerry) but the rest would be nice ;-).
I've downloaded bin 353, but not exactly sure what to do with it....says it's a AVG update file. I usually enter keys in manually, but I have interfaced with laptop before. Thanks.
Louisville, Kentucky
|
|
papakevin
Newbie
|
9. September 2006 @ 00:57 |
Link to this message
|
Couldn't figure out to edit previous post - sorry. It is a .bin file, but is recognized as a AVG file on my home PC. Any directions on how to load via laptop to 3500SD is appreciated. Still question if this is a complete fix for all viewing. Thanks.
Louisville, Kentucky
|
|
papakevin
Newbie
|
9. September 2006 @ 04:17 |
Link to this message
|
|
OK, last question. Can you load a .bin file from a SD card or do you need a PC? I'm looking for the manual for the receiver, but can't find it. Thanks.
Louisville, Kentucky
|
AfterDawn Addict
|
9. September 2006 @ 11:31 |
Link to this message
|
|
Papakevin, Bin 353 is the last old bin before the channels went out. Its not the one we are waiting for. It will only get the locals and the few VODs that came on recently. The pansat bin files need to be loaded with the Pansat loader program. It will recognize the bin file when you select it within the loader program. The 3500 can be updated by either the serial port or the sd card slot. If your laptop only has USB ports like some newer one have, then a USB to Serial adapter is needed. If your laptop has a SD card slot, then the file can be loaded to the sd card and then transfered to the 3500 by the card slot there. No need to actually hook the 3500 to the PC when using that process. You will need to read up on the exact steps for the sd card update. I have never done one that way. I think that answers all your questions.
Jerry
This message has been edited since posting. Last time this message was edited on 9. September 2006 @ 11:32
|
|
dodger18
Junior Member
|
10. September 2006 @ 02:26 |
Link to this message
|
|
Hi jerry, after months of not turning the pansat on I gave it a try, and found a bright "no signal" on my screen, turned to channel 407 and goltv went on for and 15 seconds and went off to no signal, took pansat down to den and connected it there where 407 stayed on until I changed channels and when I went back to 407 again, no signal. I went to other non $ channels and got "no signal" is it a connection, did dish get pushed by wind? What to do, thanks
|
|
Advertisement
|
|
|
AfterDawn Addict
|
10. September 2006 @ 14:19 |
Link to this message
|
|
Hi dodger18, make sure you have the last working old bin installed which I think were 353 for the 3500 and 272 for the 2700. Turn off the auto roll features, then load the newest keys. Delete all channels and rescan the sats. That should give you some locals and some PPV movies on the VOD channels around the 5000 channel numbers. Here are the last set of keys.
Bell ExpressVu
Last Update:
09-01-06 1:27 pm
Key 0: Active
60 8E E3 69 62 EA BD 1B
0B 1A CF 6C DA AE 3A 16
Key 1:
3A BA CD 06 03 CE 6D 97
EC FB 9E 68 D4 5E 21 C6
DishNetwork
Last Update:
09-08-06 5:33 pm
Key 0: Active
ED 0E 4C 1A 93 F7 69 15
9A 8B A3 67 D5 D7 E1 E5
Key 1:
A3 CF 58 E1 50 F6 08 C1
60 90 D2 EA 32 21 06 70
Jerry
|
