|
Pansat 3500
|
|
|
crowbar91
Junior Member
|
26. September 2006 @ 18:01 |
Link to this message
|
|
jerry thanx for the info r u going to post the fix on here when it comes out
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
26. September 2006 @ 18:32 |
Link to this message
|
|
I had a conversation with dRD (Owner of Afterdawn) about rules concerning FTA postings and how much information we can post. If you look at the top of this sections listing, there is a statement about discussing Piracy and descrambling issues. This statement was made to cover cable TV but at that time FTA wasn't too popular as it is today. It was decided that the same rules apply to FTA and therefore posting of the actual files should not be allowed. This also applies to key numbers in open forum. We can still help you locate the file and keys needed by other means either as a link or in a PM, just no direct posting. We need to keep Afterdawn legal even though the forum is located outside the USA. No need to have a spotlight on us for posting the wrong type of information. As an example someone may ask::: Can someone PM me the latest key numbers?
Hopefully you will get what you need or at least a link to find the info. Just use your heads and we can continue helping each other without needing a mod to get involved.
Jerry
|
AfterDawn Addict
|
27. September 2006 @ 10:35 |
Link to this message
|
|
|
crowbar91
Junior Member
|
27. September 2006 @ 11:18 |
Link to this message
|
|
hey thanx jerry for the info
|
|
CPK2006
Junior Member
|
27. September 2006 @ 16:31 |
Link to this message
|
|
Thanks Jerry are you allowed to tell us the name of the latest BIN file for the Pansat 3500sd. Obviously we need this to load our dishes but do we also need new codes
Thanks
|
AfterDawn Addict
|
27. September 2006 @ 17:04 |
Link to this message
|
Well here is a link to the file, but the problem may be getting in there to get it. It seems most of the sites are jambed up with everyone trying to get the files. Good luck getting in there.
http://www.al7bar.tk/Forums/attachment.p...93&d=1159369753
The file is numbered 355 dated today.
Jerry
There is a new loader included in the zip file download. Be sure to use the new loader.
This message has been edited since posting. Last time this message was edited on 27. September 2006 @ 17:06
|
|
CPK2006
Junior Member
|
27. September 2006 @ 17:38 |
Link to this message
|
|
Thanks Jerry I registered on that site but they say I don't have access to that link
Thanks
|
AfterDawn Addict
|
27. September 2006 @ 18:41 |
Link to this message
|
Both Pansat sites Al7bar and Future-FTA are just getting back up from a server upgrade. Both sites are running very slow and with some problems.
Here is another link at www.fsfta.com. I was able to get right in there. You may have to register there also.
http://www.fsfta.com/attachment.php?atta...31&d=1159370006
Sorry, it is the correct link for the 3500.
Jerry
This message has been edited since posting. Last time this message was edited on 27. September 2006 @ 18:45
|
|
GIOTDI
Newbie
|
27. September 2006 @ 18:54 |
Link to this message
|
|
jerry-they can also get them on dsscentral.net
LATEST FILE
P.OUT
LET'S START JERRY'S OFFICIAL FAN CLUB
IF YOU RUN FOR PRESIDENCY YOU GOT MY VOTE !!!
|
AfterDawn Addict
|
27. September 2006 @ 19:03 |
Link to this message
|
|
Once files are released every site posts them. The problem is this was such a long wait that everyone is trying to get into all sites. I belong to about 10 sites and can hardly get onto any of them.
Thanks for the FAN CLUB offer, but I just like helping out if I can. NO office for me thanks. You make too many enemies that way, LOL.
Jerry
|
|
fjcross
Newbie
|
28. September 2006 @ 12:12 |
Link to this message
|
|
@cadu1974
this situation usually occure when you don't have a cannel list in your receiver, perform a blaind scan from menu to get the channel list and the Parental control and the channel edit come activated.
|
|
CPK2006
Junior Member
|
28. September 2006 @ 12:41 |
Link to this message
|
|
but Jerry if you run for the presidency you can over turn the whole FTA laws! I am from CDN and would still vote for you
Thanks
|
|
GIOTDI
Newbie
|
30. September 2006 @ 10:32 |
Link to this message
|
|
Jerry-FTA GOD_LOL i'm helping a friend to set up his viewsat and i know that you got one can you help me out?
i install the file
the channel list and sat list also i found a file for the opkey from like june. we did the scan .channel appers but no image and no sound. i went to the key code and is showing different stuff than my pansat. Any tips?
after seeing the viewsat i'm love even more in love with my pansat 3500
|
AfterDawn Addict
|
30. September 2006 @ 11:06 |
Link to this message
|
|
@GOITDI, It may take about 5 minutes for the Viewsat to find the keys and update itself. I just put it on one of the PPV channels around 502 and left the room. About 5 minutes later when I came back in there was picture. Not sure how long it actually took to roll but less than 5 minutes. I just loaded the new file when I first got it and then scanned the sats for channels. The last update I just loaded the new file again and waited a few minutes and the picture came right in. Keys from June are outdated. Make sure in the setup menu that auto roll is turned on and also Auto TP update is on.
Jerry
|
|
shak4031
Newbie
|
30. September 2006 @ 19:35 |
Link to this message
|
|
Anyone have any experience with connecting the pansat to a dvd recorder along with TV. TV works find via Component output but my dvd recorder has rf input and av input (composite) but neither sees channels from the pansat if out. I attempted to push the signal from my tv via av (composte) out to dvd recorder input but I can't get the signal to my dvd recorder. Any help would be appreciated!!
|
AfterDawn Addict
|
30. September 2006 @ 20:00 |
Link to this message
|
|
@shak4031, This is a guess off the top of my head. My brother was having similar problems as yours. He found out he wasn't selecting the proper input in the recorder menu before recording. I wasn't there when he got it straightened out so I'm not real sure of the exact way he fixed it.
Jerry
|
|
CPK2006
Junior Member
|
2. October 2006 @ 05:34 |
Link to this message
|
|
Mr Jerry
I took your advice and bought a Viewsat reciever. To hook this up do I loop it through my Pansat 3500s, do I attached it directly to the sat dish or do I need a switch to split the signal for the Pansat and the Viewsat? What do you recommend
Thanks
|
|
cocomacac
Newbie
|
2. October 2006 @ 07:33 |
Link to this message
|
|
Hi everyone. After spending some hours with my pansat 3500s receiver and not finding the solution to my problem I decided to join this forum and hopefully get some help.
As everyone know the new bin is out and works perfect. My only problem is that I have two receivers working fine and a third one that doesn't work.
I'm getting a well known message "Scrambled or bad channel". I flashed this receiver with a bad bin (I think) and after this never worked again.
The only difference I noticed is that it is not showing the echo 8.6 anymore, It shows now echo 8.10 and some others that the other receviers don't have.
I tried different things already and still not working. Please help.
|
AfterDawn Addict
|
2. October 2006 @ 09:18 |
Link to this message
|
|
CKP2006, I just use the Viewsat only now. I gave the Pansat to my daughter/son-in-law this weekend. I never tried the loop through setup so don't know how or if it works well, so my setup is from the dish straight to the Viewsat. You can't split the dish line to 2 receivers since there is control voltage from the receiver to LNB's. You would need 2 lines off the LNB's to run 2 receivers.
Jerry
|
|
CPK2006
Junior Member
|
2. October 2006 @ 09:26 |
Link to this message
|
|
thanks, can you give me a link to down load viewsat's latest bin file. Do I enter the keys like on the Pansat 3500s?
Thanks
|
AfterDawn Addict
|
2. October 2006 @ 09:26 |
Link to this message
|
|
@cocomacac, Echostart sort of retired one sat and replaced it with Echo 10. Thats why you see the different numbers. The same channels are there just on a different sat. As to your receiver problem, try reflashing it with the FACTORY bin file which you should find on their home site. Then install the latest bin over the factory bin. Make sure you are using the correct bin for your receiver.
Jerry
|
|
cocomacac
Newbie
|
2. October 2006 @ 10:40 |
Link to this message
|
|
Jerry, thanks for answering my question so fast and for the information.
What I was trying to say is that I flashed it with the factory bin already and then intalled the last one and didn't work. My other two receivers (same model, same configuration and same bin) are working fine and never had a problem with them.
Any other ideas will be appreciated. Thanks.
|
AfterDawn Addict
|
3. October 2006 @ 06:14 |
Link to this message
|
|
If 2 out of 3 are working it sounds like a problem with the receiver itself. You must know how to do it since you got 2 up and running. I'm just guessing but it looks like a bad receiver at this point.
Jerry
|
|
crowbar91
Junior Member
|
3. October 2006 @ 07:47 |
Link to this message
|
|
hey jerry my pansat 3500s is blinking on and off i tried shutting the back off unplugging it for awhile and still nothing any ideas
|
|
Advertisement
|
|
|
|
CPK2006
Junior Member
|
3. October 2006 @ 09:05 |
Link to this message
|
|
Hey Jerry
I have a question about the Viewsat Extreme that I bought, based on your suggestion. It is a FTA, when I received it there is a smart card slot. Do I need a smart card for the FTA to work? Are there any good forums for Viewsat?
Thanks
|
