|
Pansat 3500
|
|
|
CPK2006
Junior Member
|
29. October 2007 @ 13:27 |
Link to this message
|
|
Hey Jerry
Any luck finding information on my HD question? I was wondering if the current HD FTA receivers get their HD signal from BEV or Dish
Thanks
Thanks
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
29. October 2007 @ 13:51 |
Link to this message
|
Originally posted by CPK2006:
Hey Jerry
Any luck finding information on my HD question? I was wondering if the current HD FTA receivers get their HD signal from BEV or Dish
Thanks
The only Pansat capable of receiving DN HD is the 9200, but it still needs to be modified. You need to purchase and install the add-on turbo 8psk demodulator sub board which I don't know much about at this time. The 9000 HD receiver won't work even with the modification. If I see more information I'll post it.
Jerry
|
|
chuy79
Junior Member
|
29. October 2007 @ 18:20 |
Link to this message
|
|
hello, where can i get the new bin for my pansat2500a and what are the sats i need to scan my 2500a doen't have 110, 119
|
AfterDawn Addict
|
29. October 2007 @ 22:13 |
Link to this message
|
Originally posted by chuy79:
hello, where can i get the new bin for my pansat2500a and what are the sats i need to scan my 2500a doen't have 110, 119
This site link below has the best Pansat support but the 2500 is getting almost too old. There is a conversion to change the 2500 to a 2700 so it can use the 2700 updates. Should be info on the same site for that.
http://www.future-fta.info/
Sat 110 is Echo 8.10 and 119 is echo 7
Jerry
|
|
CPK2006
Junior Member
|
30. October 2007 @ 10:46 |
Link to this message
|
|
Thanks Jerry I read up on the Pansat 9200 mod on Future-FTA. I heard that Sonicview is using some kind of module but haven't found anything yet.
Thanks
|
AfterDawn Addict
|
30. October 2007 @ 20:38 |
Link to this message
|
Originally posted by CPK2006:
Thanks Jerry I read up on the Pansat 9200 mod on Future-FTA. I heard that Sonicview is using some kind of module but haven't found anything yet.
There is an add on module for the Viewsat HD unit also. However the cost between both the receiver and then the module ($200.) is out of hand right now. I'm just going to wait it out and see if DN does something to the signal process before too long. In my opinion only, I'm looking for DN to change something to shut down all present FTA receivers. That would mean the FTA companies would need a completely new set of receivers for the new signal. This, of course is just an opinion and I have nothing solid to base this on. Its just a guess.
Jerry
|
|
dewitt71
Newbie
|
1. November 2007 @ 10:02 |
Link to this message
|
Originally posted by Jerry746:
Originally posted by chuy79:
my brother has an pansat2500a what is the channel to input the keys, pls. help
On most receivers you use the remote and enter 8282. Not sure the 2500 has that feature or not. You should be able to access the nagravision section from the menu also.
Jerry
Good morning Jerry,
I could use your expertise about now 2 problems. Problem 1. yesterday after entering 8282 on the remote and trying to iput the codes into the receiver the remote doesn't work anymore. I cannot turn off/on, input code or anything via the remote. What can I do to resolve this problem?
Problem 2. just loaded bin file 334 via receiver front panel and the screen states scramble channel, Your input will be greatly appreciated
PS. I'm new to FTA
|
AfterDawn Addict
|
1. November 2007 @ 13:43 |
Link to this message
|
Originally posted by dewitt71:
Originally posted by Jerry746:
Originally posted by chuy79:
my brother has an pansat2500a what is the channel to input the keys, pls. help
On most receivers you use the remote and enter 8282. Not sure the 2500 has that feature or not. You should be able to access the nagravision section from the menu also.
Jerry
Good morning Jerry,
I could use your expertise about now 2 problems. Problem 1. yesterday after entering 8282 on the remote and trying to iput the codes into the receiver the remote doesn't work anymore. I cannot turn off/on, input code or anything via the remote. What can I do to resolve this problem?
Problem 2. just loaded bin file 334 via receiver front panel and the screen states scramble channel, Your input will be greatly appreciated
PS. I'm new to FTA
Did you check the remote batteries??? If they are good then the remote probably went bad.
Haven't looked at the 2500 bin numbers lately but all other receivers needed new bin files yesterday so my guess is 334 may be outdated. You can try turning off the key auto roll and manually enter new keys for now and see if that works when you get the remote working.
Jerry
|
|
mrdave
Junior Member
|
3. November 2007 @ 17:49 |
Link to this message
|
Originally posted by Jerry746:
Same here, I had all the files and software weeks before I received my 2700A. Here is another good FTA site. Home of Blacklist the code writer.
http://www.future-fta.info.
Everything you need for a Pansat is there.
Jerry
Hi Jerry. I have been browsing these forums and notice that you are one to know all about Recievers and satellite dishes, so heres my question to you. First off, I am a complete noob on this stuff. And I mean COMPLETE. I got a pansat 3500sd reciever from a buddy of mine,(he never used it) and I bought a dish on ebay. Now I have downloaded the latest bin file( I think. X-05BL_071102_335_api_NOCARD). I have dragged and dropped this file onto my sd card. I put it back in the reciever, went to sd memory, selected this file and hit ok. It did its flash. Now when it rebooted the reciever I selected english, and antenna set up. I picked Nimiq 2 for Bell Expresvu cause my buddy had written that on the manual so technically Im not even sure if is right(hes outta town thats why Im asking here.lol) Anyway after I do a scan it keeps coming up with 0 program found. Am I doing something wrong? Thanks in advance. By all means if anyone else has an idea please feel free to answer.:)
Some sort of writing goes here?
This message has been edited since posting. Last time this message was edited on 3. November 2007 @ 17:51
|
|
jre1393
Newbie
|
3. November 2007 @ 18:13 |
Link to this message
|
|
what's up ya'll I just got my pansat 3500 sd yesterday and I'd appreciate very much if somebody here could tell me how to use it and where to get the keys,bin file, etc please? Im completely new to this stuff so i really don't know much. THANKS
|
|
jre1393
Newbie
|
3. November 2007 @ 18:30 |
Link to this message
|
|
What's up ya'll i just got my pansat 3500sd and id like to know if someone can tellme how it works and where i can get all the software,keys,bin file, etc whatever i need please?
I'd appreciate it
|
AfterDawn Addict
|
3. November 2007 @ 19:33 |
Link to this message
|
Originally posted by jre1393:
What's up ya'll i just got my pansat 3500sd and id like to know if someone can tellme how it works and where i can get all the software,keys,bin file, etc whatever i need please?
I'd appreciate it
Join this site as I listed before a few posts up. Everything you need to find on Pansats is there. Its free to join.
http://www.future-fta.info./
Jerry
|
AfterDawn Addict
|
3. November 2007 @ 19:40 |
Link to this message
|
Originally posted by mrdave:
Originally posted by Jerry746:
Same here, I had all the files and software weeks before I received my 2700A. Here is another good FTA site. Home of Blacklist the code writer.
http://www.future-fta.info.
Everything you need for a Pansat is there.
Jerry
Hi Jerry. I have been browsing these forums and notice that you are one to know all about Recievers and satellite dishes, so heres my question to you. First off, I am a complete noob on this stuff. And I mean COMPLETE. I got a pansat 3500sd reciever from a buddy of mine,(he never used it) and I bought a dish on ebay. Now I have downloaded the latest bin file( I think. X-05BL_071102_335_api_NOCARD). I have dragged and dropped this file onto my sd card. I put it back in the reciever, went to sd memory, selected this file and hit ok. It did its flash. Now when it rebooted the reciever I selected english, and antenna set up. I picked Nimiq 2 for Bell Expresvu cause my buddy had written that on the manual so technically Im not even sure if is right(hes outta town thats why Im asking here.lol) Anyway after I do a scan it keeps coming up with 0 program found. Am I doing something wrong? Thanks in advance. By all means if anyone else has an idea please feel free to answer.:)
The big question is knowing where the dish is pointing. If your dish isn't aimed properly at the Nimiq sats then picking that sat to scan won't get you anywhere. Bell Express is the provider in Canada and DishNetwork is in the USA. You can receive both in some locations. Do you know where the dish is aimed?? Also there are 2 main sats for each provider. Does your dish have 1 or 2 LNBs. Without this info its hard to guess.
Jerry
|
|
mrdave
Junior Member
|
3. November 2007 @ 20:20 |
Link to this message
|
|
Hi. I actually called another buddy who has the same reciever as me and it turned out to be (don't laugh) my quality was at 0%. lol I had to move my dish around a bit to get the signal. I follwed the instructions to point the dish but apparently its not a great guide as it pointed me in the wrong direction.
Some sort of writing goes here?
|
|
CPK2006
Junior Member
|
3. November 2007 @ 22:52 |
Link to this message
|
|
www.tvkeyz.com question
Hey Jerry, I have been using the above link to update my keys. I have been using it for a while at it is great for getting up to the minute keys. I noticed that they now list keys for: Dish Network New PID - 0106 what is this? I have been using keys for Dish Network Main - 0101
Thanks
Thanks
|
|
CPK2006
Junior Member
|
14. November 2007 @ 14:20 |
Link to this message
|
|
NEW BIN 336 IS OUT. This fixes the pay channels and BEV fix. I found mine on www.Future-fta.info
This fix is for the Pansat 3500SD
Cheers!
Thanks
|
|
David32
Newbie
|
14. November 2007 @ 16:53 |
Link to this message
|
|
Hi Jerry
Do you know where can I find the latest fortec life time ultra bin?
thanks for your help
|
|
Ricky35
Newbie
|
15. November 2007 @ 11:27 |
Link to this message
|
|
Jerry,
I have Pansat 3500SD and DN. You helped me on one of the other threads here and I am all set now. Thanks again. Really appreciate that.
I have another question. I do not know what satellite did I scan and I was able to view international channels. It was later overwritten or dropped while scanning some other satellites and I can't get it anymore. I did not do any config changes.
How do I get it back? How do I know what satellite offers which channels?
Thanks.
|
AfterDawn Addict
|
15. November 2007 @ 12:42 |
Link to this message
|
Originally posted by Ricky35:
Jerry,
I have Pansat 3500SD and DN. You helped me on one of the other threads here and I am all set now. Thanks again. Really appreciate that.
I have another question. I do not know what satellite did I scan and I was able to view international channels. It was later overwritten or dropped while scanning some other satellites and I can't get it anymore. I did not do any config changes.
How do I get it back? How do I know what satellite offers which channels?
Thanks.
These 2 links below are for the 2 most common Dish Net sats 110 & 119.
http://www.lyngsat.com/packages/dish110.html
http://www.lyngsat.com/packages/dish119.html
The links will show all channels, sid and transponder numbers.
If you need the BEV sats, let me know and I'll find those.
Jerry
|
|
CPK2006
Junior Member
|
15. November 2007 @ 13:11 |
Link to this message
|
|
Looks like your back Jerry....
Hey Jerry, I have been using the above link to update my keys. I have been using it for a while at it is great for getting up to the minute keys. I noticed that they now list keys for: Dish Network New PID - 0106 what is this? I have been using keys for Dish Network Main - 0101
Thanks
Thanks
|
|
Ricky35
Newbie
|
15. November 2007 @ 17:35 |
Link to this message
|
|
Are "Bev" international satellites? If yes, it will be great if you can send me that info too. Thanks.
|
|
Ricky35
Newbie
|
15. November 2007 @ 18:04 |
Link to this message
|
|
Can someone tell what satellites shall I scan for European and South Asian channels?
|
|
bill038
Suspended permanently
|
16. November 2007 @ 13:50 |
Link to this message
|
Originally posted by Ricky35:
Can someone tell what satellites shall I scan for European and South Asian channels?
Check lyngsat.com They have all the information of what's on all the sats.
billo
|
AfterDawn Addict
|
16. November 2007 @ 23:18 |
Link to this message
|
Originally posted by CPK2006:
www.tvkeyz.com question
Hey Jerry, I have been using the above link to update my keys. I have been using it for a while at it is great for getting up to the minute keys. I noticed that they now list keys for: Dish Network New PID - 0106 what is this? I have been using keys for Dish Network Main - 0101
Thanks
Sorry I didn't get back to you sooner, I mssed your question here. This is what I read on another site about the PID 0106.
DN has introduced a new secondary key code and provider PID 0106...the usual main PID (Provider ID) is 0101...normally we change the keys and autoroll to keys 0101, which we must ALWAYS still keep updated and current...but with this new PID (intoduced 22 October) we cannot change the keys, and the autoroll doesn't input them, so a NEW bin is required whenever DN changes the keys in PID 0106...The new PID can be used on any specific channels that DN wants to , so in this case DN put them on the PPV's, adult channels,and international channels..and changed the new PID 0106 keys 2-3 days ago...so that why U can get the regular channels with the older bins, but need a new bin for the PPV's, adult, and international channels now.
Jerry
|
|
Advertisement
|
|
|
|
eng2007
Inactive
|
17. November 2007 @ 01:58 |
Link to this message
|
|
hello all!
i am rather new to this so i have a question...i have a pansat 3500sd and i'm currently seeing DN 119w. i'd like to point my dish to BEV 91w. do i need to install new software/bins or whatever is installed on my pansat is ok? also, what are the exact LNB settings for that BEV satellite (i believe it is Nimiq1, isn't i?)?
thank you!
daniel
|
