|
Pansat 3500
|
|
AfterDawn Addict
|
21. December 2007 @ 15:29 |
Link to this message
|
Originally posted by CPK2006:
Season Greetings Jerry
Tonight I went to http://dsscentral.net/files2007/index.php?act=download&id=414 and downloaded the lastest file version "346" but on the receive after loading it says 345. We had 343 installed and had basic channels. Since installing 346 we have nothing. What should I do now
Re-install 343 if that was partially working. DO NOT TRUST BIN FILES FROM DSSCENTRAL. Over the last few weeks there have been many bogus files on DSSC and they don't seem to stop them from being posted. Usually they are old files that someone renames to look like a new file. Pansat files will always be posted at http://www.future-fta.info first. Usually right on the front page. If you don't see files there for Pansat, they don't exist.
Jerry
|
|
Advertisement
|
 |
|
|
|
solotu
Suspended due to non-functional email address
|
29. December 2007 @ 11:56 |
Link to this message
|
|
Hello Jerry,
Is anybody out there.
I accidently found you forum and it has been the most informative out of them all.
But I haven't seen a post since Dec 21.
It seems though reecently every bin file for the Pansat 3500SD does not even work upon upload.
I am up to 351 (but haven't checked yet today).
I even go to Satelite Scan and Nimiq 1.3 shuts unit off before scan is complete. Echo scans to no avail.
I'll Keep watching this site.
Thanks for all the info...
LJ
|
AfterDawn Addict
|
29. December 2007 @ 14:24 |
Link to this message
|
Originally posted by solotu:
Hello Jerry,
Is anybody out there.
I accidently found you forum and it has been the most informative out of them all.
But I haven't seen a post since Dec 21.
It seems though reecently every bin file for the Pansat 3500SD does not even work upon upload.
I am up to 351 (but haven't checked yet today).
I even go to Satelite Scan and Nimiq 1.3 shuts unit off before scan is complete. Echo scans to no avail.
I'll Keep watching this site.
Thanks for all the info...
LJ
If I'm not mistaken, that bin 351 is a fix for the GC (GlobeCast) sats. It won't work on DN or BEV. Go back to the previous bin file and you should get some channels on DN but the PPV and premium channels will still be out.
BEV channles are still out.
Jerry
|
|
solotu
Suspended due to non-functional email address
|
29. December 2007 @ 20:21 |
Link to this message
|
|
Thanks for the quick reply.
At futura FTA the 3500sd file does have a GC in the "fix" name.
I missed that the first time.
I Just reloaded the 350bin and I let the EPG load.
68% and climbing...
Bin 350 does not work, except for AMC...
Going for 349...
and the verdict is...
Thats out too.
We will keep watching, as the case may be.
Thanks Again,
LJ
|
AfterDawn Addict
|
30. December 2007 @ 00:22 |
Link to this message
|
Originally posted by solotu:
Thanks for the quick reply.
At futura FTA the 3500sd file does have a GC in the "fix" name.
I missed that the first time.
I Just reloaded the 350bin and I let the EPG load.
68% and climbing...
Bin 350 does not work, except for AMC...
Going for 349...
and the verdict is...
Thats out too.
We will keep watching, as the case may be.
Thanks Again,
LJ
When using the older bin files BEV will still be completely out. On DN you should get most of the normal channels but no PPV,XXX or premium movie channels like HBO and Showtime. A few PPV mirror channels do work up higher around channel 5900. Maybe about 4 or 5. We just have to wait for the next bin file. Keep watching Future-fta site. Pansat bins will post there first.
Jerry
This message has been edited since posting. Last time this message was edited on 30. December 2007 @ 00:23
|
|
CPK2006
Junior Member
|
2. January 2008 @ 22:58 |
Link to this message
|
Happy New Years guys
Well this latest crack down is more of a pain in the a$$. Has anyone found that echo 8.6 is completely down? We see that our echo 8.6 says no signal.
Thanks
|
|
zeldajae
Suspended due to non-functional email address
|
3. January 2008 @ 08:09 |
Link to this message
|
Originally posted by CPK2006:
Happy New Years guys
Well this latest crack down is more of a pain in the a$$. Has anyone found that echo 8.6 is completely down? We see that our echo 8.6 says no signal.
Well Echo 8.6 is down. It is for everyone who is using Echo 8.6. Mine is down also. Pansat is also dows because of the new bin file. Which is 351 as far as i no. We are all waiting on the new bin file which is 352. And we will see how long that last.
|
AfterDawn Addict
|
3. January 2008 @ 16:30 |
Link to this message
|
|
All new files released at Future-fta.info. I can't say how long the fix will last.
Jerry
|
|
zeldajae
Suspended due to non-functional email address
|
3. January 2008 @ 16:37 |
Link to this message
|
Originally posted by Jerry746:
All new files released at Future-fta.info. I can't say how long the fix will last.
Jerry
Is the new bin file out for Pansat 3500? I have the 351. The new one out yet
|
AfterDawn Addict
|
3. January 2008 @ 21:44 |
Link to this message
|
Originally posted by zeldajae:
Originally posted by Jerry746:
All new files released at Future-fta.info. I can't say how long the fix will last.
Jerry
Is the new bin file out for Pansat 3500? I have the 351. The new one out yet
Here is the link to all the new Pansat files, but I have heard rumors that DN is already playing with the signal again. All you can do is try the files and see.
http://www.future-fta.info/index.php?stage=1
Jerry
|
|
crowbar91
Junior Member
|
6. January 2008 @ 20:45 |
Link to this message
|
|
hey jerry i can't get that much channels on 119 and the signal says 100% but wen i channge channels they all say 39% just for the 119 thou any one else with this problem im in the northwest canada
|
AfterDawn Addict
|
6. January 2008 @ 23:17 |
Link to this message
|
Originally posted by crowbar91:
hey jerry i can't get that much channels on 119 and the signal says 100% but wen i channge channels they all say 39% just for the 119 thou any one else with this problem im in the northwest canada
I would check all the settings in the sat/antenna setup menu to see if any of them changed. If all is correct there, then look for possibly bad connections, wires, LNB, or possibly the dish itself moved. Look and see if anything new happens to be in the line of site from the dish to the sat position in the sky.
Does the signal come back up after a few minutes?? Keep in mind that this new bin file takes about 30 seconds to roll the keys every time you change channels on every channel. So you will see about 30 seconds of key roll on every channel you pick
Jerry
This message has been edited since posting. Last time this message was edited on 6. January 2008 @ 23:20
|
|
crowbar91
Junior Member
|
9. January 2008 @ 02:52 |
Link to this message
|
|
hey jerry my friend just got a dish with three lnb's on it for 119 110 91 birds which sat do we find first,its a oval dish just dont know which one first any help thx
|
AfterDawn Addict
|
9. January 2008 @ 10:26 |
Link to this message
|
Originally posted by crowbar91:
hey jerry my friend just got a dish with three lnb's on it for 119 110 91 birds which sat do we find first,its a oval dish just dont know which one first any help thx
I think I read somewhere that 119 should be first but I'm not 100% sure. If you do 119 first, then 110 would be to the left of 119 standing in front of the dish and slightly lower. 91 left of 110 but I don't remember if its higher or lower. I only have 110 & 119.
Jerry
This message has been edited since posting. Last time this message was edited on 9. January 2008 @ 10:27
|
|
muzaffer
Newbie
|
11. January 2008 @ 14:32 |
Link to this message
|
I just bought a Pansat 3500SD and have been playing around with it to set it up. I have two dishes one for the 110/119 and the other for the 61.5, I just get one Co-ax into the house and I was using a dish network 522 dual tuner receiver with that. I used this one cable coming into my house as input to my pansat and I was able to scan all satellites and was watching TV on it for a while.
The problem now is that after every 10 minutes my leve drops to like 37% and the quality goes to 0% and I see no signal. If i reset the box with the switch at the back and then go into the antenna setup, I see the level and quality back up to 80% and I tried again to see if it drops and after 10 min it sure did.
I thought this could be the famous C-13 and C-14 capacitor issue and opened the box but couldnt see the bulge on the capacitors to indicate that these were blown, is it still worth replacing it? Can somebody help me out with this.
|
|
Sledge717
Newbie
|
17. January 2008 @ 19:52 |
Link to this message
|
|
Hey I have a pansat 3500 and I was wondering if you can pick up other satellites besides DN 110,119 and BEV 91.
|
|
dodger18
Junior Member
|
20. January 2008 @ 10:29 |
Link to this message
|
|
hi jerry, after years of having the guy that i bought my pansat 3500s from download my bins for me,he has given up doing it weekly, so can you explain, in really for dummy terms, how to download bin files, i think i have the null cables (though someone told me they down need to be nulls)i think i downloaded the loader but not sure, or how to go from there, please help, thanks
|
|
wanted24
Newbie
|
20. January 2008 @ 16:47 |
Link to this message
|
|
hello jerry. i would like input of receiver nfusion. i heard good things about it. especially getting bin through wireless net. but since u know much about such things, what u think of it?
|
AfterDawn Addict
|
20. January 2008 @ 22:52 |
Link to this message
|
Originally posted by wanted24:
hello jerry. i would like input of receiver nfusion. i heard good things about it. especially getting bin through wireless net. but since u know much about such things, what u think of it?
My personal opinion on Nfusion is that it is an unsafe system being hooked to the internet for bin file updates. The Nfusion sites claim the internet link can't be traced back to your personal IP. I know from experience in internet security that if the sat providers wanted to spend the money and bring in the right people and equipment, they could easily track your connection back to you. The receiver does work work as advertised but there is no way I would own one. This in my opinion only and many people will disagree with me and tell you its safe. You have to decide if you want to take a chance on it.
Jerry
|
|
sssharp
Junior Member
|
20. January 2008 @ 23:00 |
Link to this message
|
|
I will give a little help.
sledge717- if you want anything other than dish or bev your dish needs to be 30". I have a motorized 36" that gets about 20 different sats in the sky. I personally just use dn 110/119 for my channels.
dodger18- you need to go and sign up at the future fta site. It has the directions and many helpers for pansat newbies like yourself. With the 3500 a sd card is all that you need to load the bins on and install on the receiver.
wanted24- not to be rude but you should start your own thread, the title is pansat 3500. The folks here probably dont have any answers you are looking for.
|
AfterDawn Addict
|
20. January 2008 @ 23:35 |
Link to this message
|
Originally posted by dodger18:
hi jerry, after years of having the guy that i bought my pansat 3500s from download my bins for me,he has given up doing it weekly, so can you explain, in really for dummy terms, how to download bin files, i think i have the null cables (though someone told me they down need to be nulls)i think i downloaded the loader but not sure, or how to go from there, please help, thanks
Here is a 3500 setup guide link. You need adobe reader to open it and may need to join the site to get it. Free to join.
http://www.al7bar.tk/Forums/attachment.p...13&d=1142579863
Jerry
|
Newbie
|
26. January 2008 @ 19:16 |
Link to this message
|
|
hello jerry i am new to this and i have a question. you see installed my pansat and loaded the bin and everything was working geart. tihs last 2 days it had been really cloudy outside and i havent been able to see any the channels. like i said i am new to this so i dont undesrtand why or if it has anything to do with it because when i check tps the quality is like at 85% in some channels so i dont know i think the satellite is getting signal and i changed bins 241 243 and 243, same thing happens.Its cloudy outside but no as cloudy to like not see the channels i would say i dont know if it got anything to do with it but i can still see some of the free channels . Is my satallite not position correcly? or what would you say is the problem? thank you for your help
Legally Insane.....
|
|
ojailbird
Suspended due to non-functional email address
|
26. January 2008 @ 19:20 |
Link to this message
|
|
future-fta has new bins for all pansat receviers for dn and bev
|
|
ojailbird
Suspended due to non-functional email address
|
27. January 2008 @ 14:39 |
Link to this message
|
|
361 for pansat is released at future fta
|
|
Advertisement
|
|
|
Newbie
|
27. January 2008 @ 16:12 |
Link to this message
|
|
heyy thank you all the new bin fixed the problem. i have a pansat 2700 so bin 245 fixed it thank you.
would somebody please help me out tell a website or something that explains where to ponit my satallite correcly . I used to pay for dishnetwork a long time ago so my satallite was already set up but i think it needs a little adjustment because on the echostar 7 most tps show 80 or 85% but some show 50% and on the echostar 8 most tps are below 50% ........ thank you for your help
Legally Insane.....
|
