|
Well for starters the x3 ftp is for network bios flashing..you need to be in evox dash, or unleash or whatever.. the xbox numbers are in the dashboard >system>settings and as long as they kinda match up with the pc ip then it will work.. If you haven't changed any passwords...hold on.. I'll go and find my proper guide..here we go...
XBOX NETWORK SETUP GUIDE
1. disable any firewalls (or set them to ALLOW when trying to connect to your xbox).
2. Disable the LAN connection and connect the crossover cable to pc and xbox.
3. Right click the LAN connection (under START/CONTROL PANEL/NETWORK CONNECTIONS), click "properties", under the "general" tab, go down the list, click on "Internet protocol (TCP/IP)" then click properties again. Use the following settings;-
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: don't worry about it 0.0.0.0 is fine
Click OK.
4. On your desktop, you need to see an icon labelled "My Network Places" (If its not there, right click on your desktop, click "properties", click "desktop" tab, then click "customize Desktop...", tick the box at the top for "My network places" and click OK, and again OK to exit display properties).
Right click on "My Network Places" and select "add new network place", then click the writing which says "sign up for online storage or connect to a network server", a wizard thing pops up, click NEXT, the next screen brings up a list of service providers, highlight the 1 which says "Choose another network location........." then click NEXT, in the space type this
ftp://xbox:xbox@192.168.1.200
click NEXT, the next page is the name, your choice, I just put XBOX on mine, click NEXT, then untick the box (open this..... when finished", click FINISH
NOTE: ALL THE SETTINGS ABOVE ARE ASSUMING THEY ARE LEFT AS DEFAULT ON EVOX, IF YOU CHANGED THEM PUT THE PASSWORD BACK TO "XBOX" AND THE IP BACK TO 192.168.1.200 OR THESE SETTINGS WONT WORK!!!
5. On xbox, goto settings and make sure it says "use static IP" YES.
6. Reboot your xbox, on evox dash it should display the IP as 192.168.1.200 (if it does not take note of step 5. and make sure the IP is set to this).
Default gateway for the xbox with this setup is the PC IP number..
7. Re-Enable the LAN on your pc, a bubble pops up "LAN Connection 100.0 Mbps ..."
8. Finally, double click the "My Network Places" icon on your desktop and open the folder named XBOX (or whatever you specified in step 4.) and it should show you your xbox hard drive (C,E,F,X,Y,Z and D is the DVD-Rom).
You seem to be connected tho...add an exception in your firewall for WS and it should come to life... nearly there..
Don't attempt to set up the DHCP...do you know what a DHCP server daemon is?? lol and good luck.. if all else fails just try re-booting everything a couple of times..the xbox has a habit of resetting to "telnet IP" numbers..
This message has been edited since posting. Last time this message was edited on 14. May 2006 @ 08:03
|
