|
|
|
dvd burning problems
|
|
|
cynflux
Newbie
|
5. June 2006 @ 00:27 |
Link to this message
|
|
i've been using DVD Shrink 3.2.0.15 and Nero.
I was not having any problems till yesterday.
DVD shrink tells me that encoding was done, but the dvd burning was unsuccessful. I ue DVD-R media. I attempted to use a DVD+R disc and it burned sucessfully, but the dvd drive has trouble reading it. When it played the dvd, there were a lot of artifacts.
I recieved the following message:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 2/1/2001 5:10:18 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 7/13/2003 4:49:42 AM
Nero API version: 6.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0H - HA 2 TA 0 - 6.0.0.0
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4241N atapi Port 1 ID 0 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 958MB (981488kB)
Free physical memory: 621MB (636100kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
NeroAPI
1:32:58 AM #1 Phase 112 File APIProgress.cpp, Line 232
DVD-Video files reallocation started
1:32:58 AM #2 Phase 114 File APIProgress.cpp, Line 232
DVD-Video files reallocation completed (no file modified)
1:32:58 AM #3 Phase 111 File APIProgress.cpp, Line 232
DVD-Video files sorted
1:32:58 AM #4 Text 0 File Reader.cpp, Line 118
Reader running
1:32:58 AM #5 Text 0 File Writer.cpp, Line 127
Writer LITE-ON DVDRW SOHW-1633S running
1:32:58 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
1:32:58 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)
1:32:58 AM #8 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-At-Once, using DVD media
1:32:58 AM #9 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2286127 (508:01.52)
1:32:58 AM #10 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
1:32:59 AM #11 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
1:32:59 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
1:32:59 AM #13 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info ======================= Burning to LITE-ON DVDRW SOHW-1633S on a DVD-R media
1:32:59 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder LITE-ON DVDRW SOHW-1633S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387330048
1:32:59 AM #15 Phase 24 File APIProgress.cpp, Line 232
Caching of files started
1:32:59 AM #16 Phase 25 File APIProgress.cpp, Line 232
Caching of files completed
1:32:59 AM #17 Phase 36 File APIProgress.cpp, Line 232
Burn process started at 4x (5,520 KB/s)
1:32:59 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
1:33:00 AM #19 Text 0 File DVDR.cpp, Line 1407
Recording mode: Sequential Recording Mode
1:33:00 AM #20 Text 0 File Mmc.cpp, Line 18119
Set BUFE: SMART-BURN -> ON , Generic write control : ON
1:33:00 AM #21 Text 0 File DVDR.cpp, Line 1522
Start write address at LBA 0
DVD high compatibility mode: Yes
1:33:00 AM #22 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:33:07 AM #23 Text 0 File Writer.cpp, Line 318
01:33:07.037 - LITE-ON DVDRW SOHW-1633S : Queue again later (Intervall : 11msec)
1:34:42 AM #24 SCSI -1135 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x01C56000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
1:34:42 AM #25 SCSI -1023 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x022F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
1:34:42 AM #26 CDR -1023 File Writer.cpp, Line 335
Command sequence error
1:34:42 AM #27 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
1:34:42 AM #28 Text 0 File ThreadedTransfer.cpp, Line 221
conversion idle, stopping reader
1:34:42 AM #29 Phase 38 File APIProgress.cpp, Line 232
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 6:34:55 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDRO
i'd appreciate any kind of help with solving this problem.
thank you in advance.
|
|
Advertisement
|
|
|
|
|
Car.Mike
AfterDawn Addict
|
5. June 2006 @ 05:56 |
Link to this message
|
cynflux,
Welcome to the forum. Below are the problems you are having.
1. Update Nero to the version below and go no higher as the higher version is buggy
nero version 6.6.0.18 updates:
Package 1
http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
Package 2
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
2.You need to update your firmware as you are a few versions behind and this might help the burner recog. the different brand of blank media. You can go to the site below and update to version BSOY:
http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=17
3. === Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4241N atapi Port 1 ID 0 DMA: Off
The burners should be in DMA Mode. Go to device manager and locate the Secondary IDE and then right click it and uninstall that burner and then let Windows re-boot and re-install it automatically
You also might need to get a Free Registry Cleaner( you can google for one) and clean the registry of any conflicts and Windows can go into PIO Mode if there are too many registry conflicts.
4. 1:34:42 AM #24 SCSI -1135 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x01C56000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
This is the burner not recog the blank media you are using and this is why I suggested the firmware update
5. :34:42 AM #25 SCSI -1023 File Cdrdrv.cpp, Line 1361
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x022F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Burner is not recog the computer command
Lets see if the above helps . If not post back w/ a new log so we can see the errors
This message has been edited since posting. Last time this message was edited on 5. June 2006 @ 05:56
|
|
cynflux
Newbie
|
5. June 2006 @ 12:21 |
Link to this message
|
thanks for the response.
i updated Nero, the firmware, and un-installed the IDE you mentioned.
i got a burn error but i think it is different that the last one.
here it is:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 9:20:56 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4241N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4241N D: CDRom0
LITE-ON DVDRW SOHW-1633S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981488kB)
Free physical memory: 571MB (585068kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
NeroAPI
4:02:19 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
4:02:19 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
4:02:19 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
4:02:20 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
4:02:20 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:02:20 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
4:02:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:02:20 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:02:20 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:02:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
4:02:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
4:02:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
4:02:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:02:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
4:02:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
4:02:20 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
4:02:20 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:02:20 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
4:02:20 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
4:02:21 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:02:21 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
4:02:21 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
4:02:21 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
4:02:21 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:03:03 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
16:03:03.908 - LITE-ON DVDRW SOHW-1633S\H2 T0 : Queue again later
4:05:23 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00C30000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x7D 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
4:05:23 PM #27 CDR -1135 File Writer.cpp, Line 311
Write error
4:05:23 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:05:23 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:05:24 PM #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 163295
4:05:24 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
4:05:24 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:05:24 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 8:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 6:34:55 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
is my dvd burner fried?
i have used the same DVD-R media for about a year.
it is not until a few days ago that i started having problems.
thank you in advance for your help.
|
|
Car.Mike
AfterDawn Addict
|
5. June 2006 @ 12:30 |
Link to this message
|
|
cynflux,
It is your blank media. Try Verbatim, Taiyo Yuden, Maxell, Sony(made in Japan)to get the better media. It just does not like th Prodisc's you are using.
Also you might change the Target size to Custom-4350 so you do not burn to close to the outer rim.
Everything else looks OK in the log except for the media not being liked. I think if you get some of the better blank media you will be good to go. If you are in the U.S. then you can look at BestBuy and they sell the 16X Verbatims for $ 19.99 for 50. They are usually advertised in the Sunday paper at least 1 time a month
|
|
cynflux
Newbie
|
6. June 2006 @ 02:28 |
Link to this message
|
|
thank you for your help.
can you explain something to me though?
how is that that the dvd burner accepted
the media i using up until recently?
thank you in advance
|
|
Car.Mike
AfterDawn Addict
|
6. June 2006 @ 03:51 |
Link to this message
|
|
cynflux,
The disks you are using are made by alot of different companies and the MID Codes could have been different that what your burners can recog.
|
|
cynflux
Newbie
|
7. June 2006 @ 15:34 |
Link to this message
|
|
i bought some SONY DVD-R's and the dvd burned sucessfully.
my dvd player has troubling reading the disc though.
sometimes it will play the dvd..sometimes it will not.
unfortunately, i bought a 100 pk. spindle of the Prodisc's
a while back. now i am stuck with about 50 Prodisc dvd-r's that won't work in dvd burner. any idea what i can do with them?
thank you in advance.
|
|
Car.Mike
AfterDawn Addict
|
7. June 2006 @ 16:51 |
Link to this message
|
|
cynflux,
The reason it is having a problem probably playing in the DVD Player is the compatibility of the blank media to the DVD Player. You can try burning them at a slower speed to see if that helps. You can still use them for data storage ( spreadsheets, Pictures)or you can use them as Drink coasters. LOL. I think the slower speed might work as you might have multiple manuf. that did the blank media
|
|
cynflux
Newbie
|
12. June 2006 @ 15:05 |
Link to this message
|
|
I burned a few DVD's with Sony DVD-R's. The first DVD played immediately as soon it was read in the dvd player. The second required me to open and close repeatedly the dvd tray. Eventually, it works after about 10 mins. The dvd player is Panasonic and it was purchased several years ago. The content on the DVD's were different. Does this have an effect on the likelihood that it will be played? Which is the best recommended dvd player? There is a Memorex DVD player on sale and i was thinking about purchasing it. My father has the exact model I am interested and the dvd's i have burned seemed to work on it.
|
|
Car.Mike
AfterDawn Addict
|
12. June 2006 @ 15:38 |
Link to this message
|
|
cynflux,
I think the Panasonic player you have just does not some of those Sony disk's. If the Memorex plays the burned DVD's then go ahead and get it. You might try Verbatim Blank Media as they might play in the Panasonic. See if you can borrow a few from a friend and try them. It could also be that the older players do not like the MID codes on the newer blank media and thusly have problems playing them. If the Memorex Player plays (+)DVD's and if your burner can booktype (+)DVD's to DVD-Rom then I would use (+) blank media as they would be more compatible w/ the players
|
|
phoenixmg
Member
|
13. June 2006 @ 10:54 |
Link to this message
|
I've received a similar error from my PC when I've tried to back up some DVDs. This has been going on for 2 months. I tried downgrading my Nero and I have the latest DVD Fab & DVD Shrink. I have a NEC DVD RW ND-3520A.
|
|
Car.Mike
AfterDawn Addict
|
13. June 2006 @ 11:19 |
Link to this message
|
phoenixmg,
If you are putting the disk into the player and the DVD Player does not recog the burned copy it probably is a Blank media compatibility problem w/ the DVD Player. If you are not using Verbatim or Taiyo Yuden blank DVD media then I suggest you try that blank media . If it is another problem then post the Nero log so we can read it
|
|
phoenixmg
Member
|
13. June 2006 @ 12:27 |
Link to this message
|
It'll work fine until it's time to transfer the movie to the blank media. I've been using Sony, Memorex, & Verbatim blank DVD +R & DVD -R discs with no success. Would I need a firmware update? If so, where can I get one? I've tried backing up the following: Munich, Tamara, Samurai Jack Season 3 set, X Men Evolution, & Grizzly Man. Here's the error log/message that I keep getting:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163 D: CDRom0
_NEC DVD_RW ND-3520A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523260kB)
Free physical memory: 189MB (194160kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.6.2006
NeroAPI
3:17:25 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
3:17:25 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
3:17:25 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
3:17:25 PM #4 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
3:17:25 PM #5 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
3:17:26 PM #6 Text 0 File Reader.cpp, Line 127
Reader running
3:17:26 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:17:26 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:17:26 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
3:17:26 PM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
3:17:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
3:17:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
3:17:26 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
3:17:26 PM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:17:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-3520A]
--------------------------------------------------------------
3:17:26 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
3:17:31 PM #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
3:17:31 PM #18 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
3:17:31 PM #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
3:17:31 PM #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
3:17:31 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:17:31 PM #22 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
3:17:31 PM #23 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
3:17:31 PM #24 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
3:17:31 PM #25 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:17:31 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
3:17:31 PM #27 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
3:17:31 PM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
3:17:31 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
3:17:31 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:17:31 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
3:17:34 PM #32 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
3:17:34 PM #33 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 1:32:46 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 10:53:04 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Car.Mike
AfterDawn Addict
|
13. June 2006 @ 15:08 |
Link to this message
|
phoenixmg,
Here are the errors below:
1. NEC DVD_RW ND-3520A> Version: 1.04
Firmware needs updating to version 3.05. You can get it below
http://www.de.nec.de/softwareoverview2.php/id/557
2. DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off
The NEC drive has DMA turned off. Uninstall the secondary IDE Channel in Device manager and the re-boot to let Windows reinstall it properly. I would suggest that you D/L a free Registry Cleaner and clean out the registry as conflicts can cause the OS to degrade the DMA down to PIO status
3. Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
You need to set the target size to custom-4350 so you do not burn too close to the outer rim
4. Disc Manufacturer: RITEKF - 1
It see the Ritek disk but it does not like them as it is seeing it as an illegal disk
5. Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Conflicts the the program and the computer system as the computer is not responding. Might be helped by the registry cleaner, Firmware update and better blank media. You were using the Verbatim but the burner needs to have the MID Code for the Verbatim's and hopefully that update will help.
|
|
cynflux
Newbie
|
14. June 2006 @ 15:08 |
Link to this message
|
hello,
thank you for your help.
i notice that after the firmware update, that DVD Shrink will only burn at 4X. is this normal?
I was also wondering how to remove the skips and blocky artifacts that appear when i play a burned dvd.
would changing the target size fix this problem?
i've cleaned the dvd laser lens, but the problem still seems to happen.
Before i burn a dvd, i always defrag my hard drive.
<< You need to set the target size to custom-4350 so you do not burn too close to the outer rim. >>
i would recommend changing this setting before DVD Shrink scans the dvd and before you do the Deep Analysis.
|
|
Car.Mike
AfterDawn Addict
|
14. June 2006 @ 15:42 |
Link to this message
|
|
cynflux,
You set your speed in Shrink by going to Backup> Burn settings and the speed for the blank media should be there.
The artifacts are many caused by the blank media, and burning too fast. Have you tried the Verbatims yet?
Once you set the custom size of the target disk that size should stay the same disk after disk
|
|
phoenixmg
Member
|
14. June 2006 @ 19:23 |
Link to this message
|
|
Thanks, CarMike. I'll give that a try and update you.
|
|
phoenixmg
Member
|
15. June 2006 @ 20:14 |
Link to this message
|
|
I goofed and accidentally unstalled the secondary driver before using the update. Is there anyway to fix this?
|
|
phoenixmg
Member
|
15. June 2006 @ 20:43 |
Link to this message
|
|
Never mind, it came back. How do I connect it to the secondary driver as Master & Disconnect all slave hardware from IDE secondary Master?
|
|
Car.Mike
AfterDawn Addict
|
16. June 2006 @ 05:46 |
Link to this message
|
|
phoenixmg,
The NEC should be the Master on the Secondary IDE Channel and the Lite-on should be the slave on the Secondary IDE Channel. These are set w/ the jumpers on the back of the Burner and DVD-Rom. The NEC should be on the longest part of the IDE Cable and the slave should be on the connection in the middle.
The HD(boot drive) should be set up on the Primary IDE Channel as master.
If you are not sure how to do it get a knowledgeable friend to do it for you.
|
|
phoenixmg
Member
|
16. June 2006 @ 12:24 |
Link to this message
|
|
I tried to follow the enclosed instructions that were with the update and I put the burner's tab on the master tab, but now my system doesn't register the drive. Where did go wrong?
|
|
Car.Mike
AfterDawn Addict
|
16. June 2006 @ 13:37 |
Link to this message
|
|
Are you running a Dell Computer. As some of the Dells want to be on Cable Select. If your is a Dell then switch to Cable Select(CS)
|
|
phoenixmg
Member
|
16. June 2006 @ 21:30 |
Link to this message
|
|
Yes. I have a Dell Dimension 8300 series.
|
|
Car.Mike
AfterDawn Addict
|
17. June 2006 @ 04:02 |
Link to this message
|
|
Set it to Cable Select and see if that helps
|
|
Advertisement
|
|
|
|
cynflux
Newbie
|
19. June 2006 @ 12:44 |
Link to this message
|
|
i tried burning a dvd a few days ago. my computer froze about 58% into the burn process andi had to reboot my computer. I tried it again the next day and it did the same thing. no other programs were running and the hard drive was defragmented. what can i do to prevent this? thank you in advance.
|
|
