Quote:

---

The error message "invalid field in cdb" is probably due to a
buffer underrun, because the error was sent as a reply con-
cerning a write command. This can occur, if the data is not
sent quickly enough for the recorder to write it. It is sent,
because the sector, that should be written has already passed
the laser beam. So this sector number cannot be written anymore
and thus the error code "invalid field in cdb" is sent.


Solutions:


1) Write with slower speed (1x, 2x)
2) Do not use your PC for something else while you're burning
3) Purchase some memory. We would recommend at least 64MB for Windows
NT 4.
4) Defragment your harddisk
5) Turn off background tasks like virus scanners, network remote
access or Office index generation
6) Make sure, that energy saving and screen savers are turned off
before burning
7) if you're using a notebook, disable the harddisk energy saving
8) Do not drag ISO files from a CD ROM drive into your ISO
compilations.
Such CD ROM drives tend to "fall asleep" from time to time.
Afterwards
they need quite some time to spin up again. A buffer underrun
may happen.

---

Quote:

---

I/O Error!

Device:(0:1:0) Plextor dvdr px-716a 1.09 (E:) (ATA)
Scsi Status: 0X02
Interpretation : Check Condition

CDB: 2A 00 00 00 00 20 00 00 20 00
Interpretation: Write (10)-Sectors: 32-63

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
Interpretation: Invalid Field in CDB

---