|
|
|
Problem Burning DVD+R / RW
|
|
|
CarlosV1
Newbie
|
23. June 2006 @ 04:18 |
Link to this message
|
Hi, I have a LITE-ON DVDRW SOHW-1533S, I'm having trouble burning DVD+R/RW's. Nero goes through the whole writing prosess without any error but when it's finished and I take it out Its plain to see that nothing being writen on the DVD.
I've used Nero InfoTool whichs says the drive is DVD+R Compatable
Hope all that makes some sort of sence and somebody can shed some light on this.
Thanks
Carl
|
|
Advertisement
|
|
|
|
Member
|
23. June 2006 @ 04:44 |
Link to this message
|
Hello.
You can post you Nero log here and we can take a look at it. You can find it here:
Nero 6: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7: Program Files>Nero>Nero 7>Core>NeroHistory.txt
Simply post the last entry. Entries are seperated with these ==========
Remember to edit out your name and serial number at the top.
----------------------------------------------------------------------------------------------------------
Computer: Intel Pentium D 3.0 Ghz dual core CPU, Philips DVD+-RW DVD8701, 1024MB RAM, ATI Radeon 256MB, Nero 6
Always use good quality blank media. Verbatim is always a good call. Don't be seduced by those 50-spindles you find in the $2.99 bin at your local car wash! :) |
|
CarlosV1
Newbie
|
23. June 2006 @ 04:54 |
Link to this message
|
Is This Whats Needed?
====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0C - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ATAPI-CD ROM-DRIVE-52MAX >Version: 52DA - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ATAPI-CD ROM-DRIVE-52MAX atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : MO7568G YOJ746Q 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S H: CDRom0
ATAPI-CD ROM-DRIVE-52MAX I: CDRom1
MO7568G YOJ746Q J: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 345MB (353960kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.6.2006
UDF/ISO compilation
12:32:38 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
12:32:38 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
12:32:38 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:32:38 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
12:32:38 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
12:32:38 #6 Text 0 File Reader.cpp, Line 124
Reader running
12:32:38 #7 Text 0 File Writer.cpp, Line 113
Writer H: LITE-ON DVDRW SOHW-1633S running
12:32:38 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:32:38 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:32:38 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
12:32:39 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1194671 (265:28.71, 2333MB)
12:32:39 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
12:32:39 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+RW
Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
12:32:39 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:32:39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1194672 (1194672) = #1194672/265:28.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1194672 blocks [H: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
12:32:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [H: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2446688256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1194672 | lead-out | 1 | 0x41 | 0x00
12:32:39 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:32:39 #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
12:32:39 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
12:32:39 #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
12:32:39 #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)
12:32:39 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:32:39 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #.?yd...?zl...?{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h.....ŕ.đ.......
12:32:39 #24 Phase 98 File dlgbrnst.cpp, Line 1724
Start formatting disc before burning
12:33:01 #25 Phase 100 File dlgbrnst.cpp, Line 1724
Formatting disc was successful
12:33:01 #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
12:46:04 #27 Text 0 File WriterStatus.cpp, Line 116
<H: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1194672 (123AB0h), length 0 blocks
12:46:04 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:46:05 #29 Text 0 File DVDPlusRW.cpp, Line 893
Media-Format will be stopped after burning
12:46:05 #30 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
12:46:11 #31 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 06/04/2006 19:15:29 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
Regards
Carl
|
AfterDawn Addict
|
23. June 2006 @ 05:33 |
Link to this message
|
Nero thinks it has burned something...at least that's what the log indicates.
A few things should be fixed:
Quote:
Nero Version: 7.0.0.0 (Nero Express)
Try updating to this version of Nero:
http://www.filehippo.com/download_nero_7_premium/?845
Your burners firmware is out of date.
Quote:
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0C - HA 1 TA 0 - 7.0.0.0
New firmware:
http://forum.rpc1.org/dl_result.php?kaj=1&isces
Your DMA is not enabled:
Quote:
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ATAPI-CD ROM-DRIVE-52MAX atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : MO7568G YOJ746Q 1.0 dtscsi Port 2 ID 0 DMA: Off
My guide to enable DMA:
http://www.dvdplusvideo.com/dvdguide005.html
The media you are using appears to be burned, however I'd switch to Taiyo Yuden or Verbatim. Are these Imation +Rs?
So, other than looking at the disc, how else are you determining it is actually blank?
A very simple test is to try and record on it again. Nero will kick it out if there is anything at all written on it.
|
Member
|
23. June 2006 @ 05:38 |
Link to this message
|
Let's see...
Quote:
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0C - HA 1 TA 0 - 7.0.0.0
Your firmware is out of date. Upgrade to BSOY (the latest) from this page.
http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=17
Quote:
Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
Not very familiar with this brand but a quick research on the media ID reveals that a lot of people don't think much of it. I would try something of better quality such as Verbatim, Sony or Fuji (made in Japan) or Taiyo Yuden.
Oh, you know what. I'm just noticing now you are using rewritable media. RW's aren't of great quality to start with but if you really need to use them, then the above recommendation still applies. RW Verbatims are okay as far as Rewritables are concerned.
Quote:
Burn process started at 2.4x (3,324 KB/s)
What's the rated max burn speed on those discs. You should be able to get better results by burning a 4x.
Quote:
Burn process completed successfully at 2.4x (3,324 KB/s)
As you mentionned it seems to be coming through. Make sure you don't select test burn (laser turned off) on the burn screen.
Update you firmware first then try again. If that doesn't work, I would consider getting better quality media. Let me know how it works out.
Edit: I see someone already replied. Yeah, I missed some :). As he said, DMA on = very important! :-)
----------------------------------------------------------------------------------------------------------
Computer: Intel Pentium D 3.0 Ghz dual core CPU, Philips DVD+-RW DVD8701, 1024MB RAM, ATI Radeon 256MB, Nero 6
Always use good quality blank media. Verbatim is always a good call. Don't be seduced by those 50-spindles you find in the $2.99 bin at your local car wash! :)
This message has been edited since posting. Last time this message was edited on 23. June 2006 @ 05:42
|
|
CarlosV1
Newbie
|
23. June 2006 @ 05:39 |
Link to this message
|
|
Cheers, when i put the burned dvd back in the drive the auto play window pops up saying that I've inserted a black DVD
|
AfterDawn Addict
|
23. June 2006 @ 05:57 |
Link to this message
|
Try the Nero update first and see if it will work.
If Nero is working properly and the problem is with the burner then using a different burning program will help figure this out.
ImgBurn:
http://www.imgburn.com/
Most of the time you will get an error message if some part of the process fails. Get the items I listed corrected, most importantly the Nero update and firmware first and see how it works. It may even be a matter of the blank media so you should try something else.
Your Nero log indicates that the disc was burned and apparently it was not, so now we have to figure out what would possibly cause that to happen and not give any type of error message.
Another thing to do is to check the "Verify data on disc after burning" box. This will be on your Final Burn Settings window.
|
|
CarlosV1
Newbie
|
23. June 2006 @ 06:31 |
Link to this message
|
|
I've enabled DMA, and updated the firmware, Quite scared to do that at first (you hear horror stories about flashing going bad)
I don't know which it was but its working now,
Thanks Guys!
Regards
Carl
|
|
Advertisement
|
|
|
Member
|
23. June 2006 @ 08:17 |
Link to this message
|
|
Glad to hear your problem was solved!
Take Care :)
----------------------------------------------------------------------------------------------------------
Computer: Intel Pentium D 3.0 Ghz dual core CPU, Philips DVD+-RW DVD8701, 1024MB RAM, ATI Radeon 256MB, Nero 6
Always use good quality blank media. Verbatim is always a good call. Don't be seduced by those 50-spindles you find in the $2.99 bin at your local car wash! :)
|
|
