|
Tutorial: How To Burn XBox360 Games
|
|
|
|
|
trezz101
Newbie
|
4. July 2007 @ 08:25 |
Link to this message
|
|
I'm also writing at 2.4x, could that be a problem?
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
7. July 2007 @ 08:41 |
Link to this message
|
hi guys
Again,still pretty new to all this...
Just wanted to check something with you guys,before i burn an image,
and this information may be of use to those who come across this problem also
if a downloaded image comes extracted as
IMAGE.000 and IMAGE.dvd,and when loaded into cloneCD you get the error message....
Quote:
error opening file IMAGE.iso...
The system cannot find the file specified
I know the reason why it says this...its because the IMAGE.dvd file has the wrong information stored inside it
I.E,if you open it with notepad,i see
LayerBreak=1913760
IMAGE.iso
So the extension is different,where the .iso should be .dvd
If you change it back to what it should read,
i.e
LayerBreak=1913760
IMAGE.dvd
Will this make any difference?
It is now accepted with cloneCD,just dont want to waste another verb
BTW,i intially burned this image by just changing the IMAGE.000 extension yo IMAGE.iso,although its not been tested yet,as i still await my abox
AND why isnt this stickied???
This message has been edited since posting. Last time this message was edited on 7. July 2007 @ 08:44
|
Member
|
7. July 2007 @ 10:27 |
Link to this message
|
Quote:
hi guys
Again,still pretty new to all this...
Just wanted to check something with you guys,before i burn an image,
and this information may be of use to those who come across this problem also
if a downloaded image comes extracted as
IMAGE.000 and IMAGE.dvd,and when loaded into cloneCD you get the error message....
[quote]error opening file IMAGE.iso...
The system cannot find the file specified
I know the reason why it says this...its because the IMAGE.dvd file has the wrong information stored inside it
I.E,if you open it with notepad,i see
LayerBreak=1913760
IMAGE.iso
So the extension is different,where the .iso should be .dvd
If you change it back to what it should read,
i.e
LayerBreak=1913760
IMAGE.dvd
Will this make any difference?
It is now accepted with cloneCD,just dont want to waste another verb
BTW,i intially burned this image by just changing the IMAGE.000 extension yo IMAGE.iso,although its not been tested yet,as i still await my abox
AND why isnt this stickied???[/quote]the .dvd is a cue file....it provides the layerbreak info and the image name...so if the image file name is image.000 the correct .dvd file would contain:
LayerBreak=1913760
IMAGE.000
and if the image file name is image.iso, the correct .dvd file would contain:
LayerBreak=1913760
IMAGE.iso
make sure you're using the latest version of clonecd or imgburn, also be sure the .dvd file and image reside in the same dir.
I don't Usenet, it uses me.
|
AfterDawn Addict
|
7. July 2007 @ 10:38 |
Link to this message
|
|
yes,i pretty much guessed that :)
just wondered why a rls would contain the wrong nfo in the .dvd file
|
|
orbital11
Junior Member
|
7. July 2007 @ 10:58 |
Link to this message
|
I have read for about 4 hours now between here and xbox-scene but still can't find an answer to my problem. I keep getting this error in Xbox Creator 2.3:
Sense Error: 5 / 20 / 00
INVALID COMMAND OPERATION CODE
CDB: READ DVD STRUCTURE
0xAD 00 00 00 00 00 00 20 00 0C 00 00
Action: Set layer 0 capacity
Sense Error: 5 / 20 / 00
INVALID COMMAND OPERATION CODE
CDB: SEND DVD STRUCTURE
0xBF 00 00 00 00 00 00 20 00 0C 00 00
Getting media info [F]
Media Type: Not Present
Write failed
I am using Pioneer 111d, files were ripped from 162c with Kreon .81, and I am using Verbatim DVD+R DL disks. What am I doing wrong or what do I need to do?
|
|
ovuka92
Suspended due to non-functional email address
|
8. July 2007 @ 14:45 |
Link to this message
|
Quote:
and if the image file name is image.iso, the correct .dvd file would contain:
LayerBreak=1913760
IMAGE.iso
I got all of this fine,but when we select an .iso file on clone cd what do we doo with the .dvd file?
And should we (if we have an prepatched image)unrar it all into one folder and then just select the .iso?
|
Member
|
8. July 2007 @ 15:06 |
Link to this message
|
Quote:
[quote]and if the image file name is image.iso, the correct .dvd file would contain:
LayerBreak=1913760
IMAGE.iso
I got all of this fine,but when we select an .iso file on clone cd what do we doo with the .dvd file?
And should we (if we have an prepatched image)unrar it all into one folder and then just select the .iso?[/quote]open the .dvd file w/ clonecd and burn.
I don't Usenet, it uses me.
|
|
BrianElkG
Newbie
|
8. July 2007 @ 16:40 |
Link to this message
|
|
Iam looking for a site like the old frogstick.com Where i can download games besites torrents anyone have any?
Brian Reynolds
|
AfterDawn Addict
|
9. July 2007 @ 00:38 |
Link to this message
|
Quote:
[quote]and if the image file name is image.iso, the correct .dvd file would contain:
LayerBreak=1913760
IMAGE.iso
I got all of this fine,but when we select an .iso file on clone cd what do we doo with the .dvd file?
And should we (if we have an prepatched image)unrar it all into one folder and then just select the .iso?[/quote]you cant select the iso with cloneCD,you need the info for the layer break,and this is contained inside the .dvd file,thats why you select the .dvd file to burn
It acts the same way as a cue file/bin and mds/mdf
|
|
treborz
Newbie
|
10. July 2007 @ 18:22 |
Link to this message
|
Hey guys. Im new with the xbox 360, but ive learned quite a bit. I was confused when i tested DiRT on my xbx 360. It worked perfectly well. Then i tried with Guitar Hero 2 and Table Tennis. None worked. I looked it up and my conclusion is that i need to patch the games before burning.
So i followed this guide, but i get an error message in XBOX 360 SS Merger v1.7b. See here: http://img172.imageshack.us/img172/8042/...gererrordw9.jpg
This message came up after i loaded the imagefile from Table Tennis, when it asked for MD5 thingie. I pressed Yes as the guide said. It loaded for a couple of mins and then POOF this error message came up.
Why is this happening, how can i fix it? PLEASE Help!
|
|
gus4real
Newbie
|
13. July 2007 @ 06:56 |
Link to this message
|
|
I'm sorry for the newbie question, but i keep unraring the files and keep getting a ts_video and audio file. what am i to do. sorry for the question but i've been searching with no avail.
|
Member
|
15. July 2007 @ 03:21 |
Link to this message
|
The only reason i can think of this is that youve got the .iso file type associated with winrar.
So when you extract the .rar files, you get an iso but it has the same icon as the rar files.
I think you are proberly extracting the iso itself, not the .rar's
-Josh
|
|
crosby87
Newbie
|
17. July 2007 @ 14:43 |
Link to this message
|
|
Many Questions Most of the sites i have clicked on dont work #2 where do ii get all of this stuff like can i get it a walgreens or something i would like to know this asap
|
|
crosby87
Newbie
|
17. July 2007 @ 14:43 |
Link to this message
|
|
Many Questions Most of the sites i have clicked on dont work #2 where do ii get all of this stuff like can i get it a walgreens or something i would like to know this asap
|
|
crosby87
Newbie
|
17. July 2007 @ 14:52 |
Link to this message
|
|
Many Questions Most of the sites i have clicked on dont work #2 where do ii get all of this stuff like can i get it a walgreens or something i would like to know this asap
|
|
kc73837
Newbie
|
18. July 2007 @ 19:15 |
Link to this message
|
|
hey guys...my xbox 360 was able to play the backup games for almost 3 month..but yesterday when i turned on my xbox, a red circle blinks instead of green...the red circle stays there and there is no image or sound....i tried 3 or 4 times but still nothing...i tried unplugging the power while my xbox is on...and when i turned it back on there's no red circle but my screen freezes after i see the xbox logo my tv for a sec..then when i put in a game..the red circle comes back...can anybody tell me how i can fix this problem?? thank you!
|
Member
|
18. July 2007 @ 19:31 |
Link to this message
|
Originally posted by kc73837:
hey guys...my xbox 360 was able to play the backup games for almost 3 month..but yesterday when i turned on my xbox, a red circle blinks instead of green...the red circle stays there and there is no image or sound....i tried 3 or 4 times but still nothing...i tried unplugging the power while my xbox is on...and when i turned it back on there's no red circle but my screen freezes after i see the xbox logo my tv for a sec..then when i put in a game..the red circle comes back...can anybody tell me how i can fix this problem?? thank you!
red ring of death :(
you might be able to fix it w/ the x-clamp fix or a heat gun....
http://forums.xbox-scene.com/index.php?showtopic=594487&st=180#
I don't Usenet, it uses me.
|
|
thatguyek
Newbie
|
19. July 2007 @ 19:07 |
Link to this message
|
How do u know if the file is already patched? Because i have a file that says stealth patches with my backup and i dont know what to do with it.
Thanks in advance.
And if it is is it possible to burn the backups with dvd decrypter.
|
Member
|
20. July 2007 @ 22:50 |
Link to this message
|
You can check if a file is prepatched with Xbox Backup Creator
Open Xbox Backup Creator
Click the IMAGE TOOLS tab
Click the STEALTH CHECK button
Then locate and open your file and it iwll check it for you
-Josh
|
Moderator
16 product reviews
|
21. July 2007 @ 05:42 |
Link to this message
|
|
Stickied
|
Member
|
21. July 2007 @ 08:32 |
Link to this message
|
Originally posted by JOSh765:
You can check if a file is prepatched with Xbox Backup Creator
Open Xbox Backup Creator
Click the IMAGE TOOLS tab
Click the STEALTH CHECK button
Then locate and open your file and it iwll check it for you
-Josh
fyi, dvdmulleter is much more reliable when it comes to stealth checking and patching:
http://tinyurl.com/39lh7h
it can also auto patch the iso ;)
I don't Usenet, it uses me.
This message has been edited since posting. Last time this message was edited on 21. July 2007 @ 08:33
|
Member
|
21. July 2007 @ 14:18 |
Link to this message
|
|
Cheers,
ill check it out
-Josh
|
|
vladser
Junior Member
|
24. July 2007 @ 02:26 |
Link to this message
|
hi .....i'm new to all this backuping games and all but if i downloaded a game and it has a image.000 and image.dvd, that means that the game is prepatched right???anyway if i put them in a folder and try to burn them with cloneCD i can load only one image.....so does the program burn both of them automatically or after i burn one select the other image and burn it as well???
|
AfterDawn Addict
|
24. July 2007 @ 11:40 |
Link to this message
|
you have to select the .dvd anyway,and all that file does is tell cloneCD where the image file is,and what layerbreak setting you want
it doesnt actually burn it
only the image gets burned
think of it like a cue/bin file
|
|
Advertisement
|
|
|
|
vladser
Junior Member
|
24. July 2007 @ 12:18 |
Link to this message
|
thx hursty.....you solved my problem yeeeeyyyy....:D:D
|
