|
Tutorial: How To Burn XBox360 Games
|
|
|
|
Member
|
16. January 2008 @ 10:44 |
Link to this message
|
This can be done very easily once you have everything you need,
You will need a Samsung PC DVD Drive;
SH-D162C (IDE)
TS-H352C (IDE)
SH-D163A (SATA)
TS-H353A (SATA)
It will have to be flashed with Kreon Firmware,
You can get the Kreon Firmware from XBINS
You can also buy these types of drives ready flashed off ebay and by using google.
I found this one:
http://cgi.ebay.co.uk/Samsung-SH-D162D-K...1QQcmdZViewItem
Once you have a flashed drive you can use computer software to rip Xbox 360 ISOs onto your PC.
Schtrom360Xtract is the software i use to rip games
-Josh
|
|
Advertisement
|
 |
|
|
|
hpansar
Newbie
|
16. January 2008 @ 17:22 |
Link to this message
|
Thanks Josh, unfortuneatly I have a Sony Burner that does all burned games but not originals.
|
|
ddempse2
Newbie
|
17. January 2008 @ 15:00 |
Link to this message
|
Does anyone have alot of clicking noises (laser movement I assume) while playing burned games? I have a modded ben-q.
To my knowledge there are two things that make a drive noisy.
1) The 'whir' of the motor which spins the disk (which is always good with my ben-q)
2) A sort of clicking sound everytime the laser moves. (Rarely happens for regular discs, but constantly happens on my burned discs)
It sounds like a noisy hard drive, but I don't have one, just a mem card, I'm sure it's the cd drive. It sounds like the laser is constantly moving. Either it's constantly going between the 2 layers of the disc or it's moving the laser back to constantly re-read parts of the disc. I'm worried it's gonna burnout my drive. I use verbatim discs and have burned on 2 different drives including a pioneer. The games work perfectly though?
Anyone?
|
Newbie
|
18. January 2008 @ 12:25 |
Link to this message
|
Hi there, i'm trying to back-up my original version of Assassin's Creed and so far have used the Wxripper method (as i have a hitachi) and it is flashed with Xtreme 1.4. I get the SS, PFI, DMI (Still not sure how to extract them manually rather than download them!?) used Mulleter to insert them into the iso file, then tried to burn the image to disc with both ImgBurn and CloneCD but both programs freeze (ImgBurn at 36% and CloneCD at 10% both at the stage of writing the layerbreak) I use Verbatim DVD+R DL discs so cant be that, i have made 2 coasters so far and dont want to make anymore! My DVD RW is a Sony DW-G120 (think its actually a Lite-On) and i know what your all going to say and that is to buy a Sammy with Kreon, i cant afford it untill i get paid, so please help me with my problem!!
Thanks.
|
|
skywalk07
Newbie
|
18. January 2008 @ 17:48 |
Link to this message
|
Need your help guys. I have read plenty of the treads here however, I have just gotten more confused. so maybe someone can explain this to me. I have no problem burning the image or iso file games, but when I get an file with the extension .000 the games never work. After i burn this 000 files they say to play this game put it in an xbox 360 console. I have use the clonecd imgburn and xbox 360 creator without any luck. I repeat it only happens with 000 files. Can someone help me please. Is there a way to convert the 000 files to image files. Thanks
|
Member
|
18. January 2008 @ 19:01 |
Link to this message
|
|
They should work just fine aswell,
are u setting the layer break when burning the 000 file?
are you sure that the 000 file is patched so it will play?
-Josh
|
|
skywalk07
Newbie
|
19. January 2008 @ 00:18 |
Link to this message
|
|
Yes I did set the layer break to 1913760 in the Imgbur program. The conseole says please insert the disc in an xbox 360 console. It only happends with the 000 files. I dont know what is going on????
|
Member
|
19. January 2008 @ 04:16 |
Link to this message
|
|
Check the 000 file with DVDMulleter and see if i t has everything needed to play it.
-Josh
|
|
skywalk07
Newbie
|
19. January 2008 @ 12:57 |
Link to this message
|
|
Thank you JOSH765 I got the xdvdmulleter. I proceded to load the 000 file, then when I did the CRC checking it found some problems and it ask me If I want it to autofix it so i did. It fix the image so i proceded to burn it and Woala it worked perfectly. Thanks a lot. From now i am putting every single iso or 000 file on the xdvdmulleter program to verify it before burning. Thanks again
|
|
gordy5
Suspended due to non-functional email address
|
19. January 2008 @ 14:24 |
Link to this message
|
|
Right i have a couple of problems, firstly i cannot get my games to play after i burn them, they come up as unrecognisable. i then tried to download xdvdmulleter or whatever it is called but cannot get it to run.any help?
|
Member
|
19. January 2008 @ 17:46 |
Link to this message
|
|
what do you mean you cant get it to run?
are you using windows xp it should run fine
-Josh
|
|
Rajj
Member
|
19. January 2008 @ 23:22 |
Link to this message
|
can i burn a xbox 360 game using dvd decrypter mode-iso-write?
is it nessasary to have a modchip to play a backup or is there another way to play a backup without a modchip, can someone tell me how i can play my backups without a modchip if it is possible?
when do i have to use xbox 360 ss merger 1.5o, when i extract a file or all the files to make an iso, or if i have it already into an iso?
|
Member
|
20. January 2008 @ 00:17 |
Link to this message
|
Originally posted by gordy5:
....xdvdmulleter or whatever it is called but cannot get it to run.any help?
make sure you have the .net framework installed. if not download and install it from here
I don't Usenet, it uses me.
|
Member
|
20. January 2008 @ 04:40 |
Link to this message
|
@Rajj
You cannot use DVD Decrypter to burn Xbox 360 games without setting the layerbreak i think im not sure.
Use imgburn or xbox backup creator, and burn with the .dvd file.
This way your burner knows when to change layers on the disk.
You need a modchip to play Xbox 360 games yes,
but you can also use the firmware mod, probably the best mod created!
-Josh
|
|
Rajj
Member
|
20. January 2008 @ 12:43 |
Link to this message
|
|
when do i use xbox 360 ss merger 1.5o, do i need to use this or it has to depend on the game?
original and the backup will boot up automatically or do i have to update the firmware?
|
|
mikeyd69
Newbie
|
21. January 2008 @ 00:19 |
Link to this message
|
I followed your tutor to a T and I got a burn that says (when I put it in an already flashed xbox360)that the disc is dirty, to clean it and put it back in. I have a couple of questions for you guys.
1. Is there any software that can read the copy and tell me what is wrong with it?
2. I am using a top taken off drive in my computer which is a
Sony RU810A. Doe's this drive need to be flashed?
3. I am using Memorex DVD+R DL. Are these ok?
4. What is the best up to date tutor on the net for backing up games?
5. Does the Sony drive have to be set to
DVD-ROM and how do I do this.
Thanks for all your answers and help, much appreciated, and thanks for all your guys hard work in helping out.
Mike
|
|
pastaboy
Suspended due to non-functional email address
|
21. January 2008 @ 02:40 |
Link to this message
|
|
You can use DVD Info Pro to set your drive to DVD Rom. Don't use Memorex. I bought them first, and I continued to get errors until I bought Verbatim's. Memorex's are a waste of money.
|
|
mikeyd69
Newbie
|
21. January 2008 @ 17:58 |
Link to this message
|
|
I am almost giving up, it is still saying "Unrecognized Disc" "This disc is unreadable."
1. Clean the disc with a soft cloth.
2. Restart the console.
too confusing, someone please help, thanks
|
|
mahooon
Newbie
|
21. January 2008 @ 18:48 |
Link to this message
|
Ok for all you having problems, i was in your shoes a little while ago. Wasted 4 dual dvds myself, wasnt to happy about that, but thats besides the fact! Alright this guide lacks to mention that it is NOT infact the .iso file you are burning. So, what you need to do is get ImgBurn. Then move the .iso file and the .dvd file somewhere together in the same folder, i use the desktop and delete afterwards. Now if you do not have the .dvd file, you can easily use XDvdMulleterBeta8 is what I have, just locate iso, click next or something till you see make .dvd file at the bottom, i believe its a check box. And then it will create your .dvd file. Open up img burn, and select the .dvd file. Even if you select the .iso file, it always comes up with a message saying, you chose the wrong file, and it automatically selects the .dvd file...
Just burn at a slow speed, I use 2x and write.
Should play perfect in your console!
|
|
mahooon
Newbie
|
21. January 2008 @ 18:52 |
Link to this message
|
|
O and by the way, all the games Ive downloaded off torrents have all been pre patched. Ive never had to patch my games, and mine have all worked. Add me on msn or send me an e-mail if you are having any trouble:
mahon.andrew@gmail.com
|
Member
|
22. January 2008 @ 12:29 |
Link to this message
|
|
|
|
abscheele
Junior Member
|
22. January 2008 @ 13:27 |
Link to this message
|
|
do the back ups work on live?
|
|
Rajj
Member
|
22. January 2008 @ 22:03 |
Link to this message
|
|
sorry to copy and paste but can someone answer my question:
when do i use xbox 360 ss merger 1.5o, do i need to use this or it has to depend on the game?
original and the backup will boot up automatically or do i have to update the firmware?
|
|
MIXsery
Newbie
|
23. January 2008 @ 08:11 |
Link to this message
|
Hey Guys,
I'm having some difficulties burning a game for my X360.
Info:
Burner: LG DVD-DL Burner
Game: NBA.2K8.PAL.MULTI5.XBOX360-DNL.[NewTDT.CoM]
Disc: Philips DVD+R Double Layer
I loaded up the game in XDVD Mulleter and it came up with the following screen:
Clicky
I think everything is correct, and It is allready patched right?
I tried to burn it then with CloneCD and when I put it in my X360 it says that the disc is unreadable.
any help please?
This message has been edited since posting. Last time this message was edited on 23. January 2008 @ 08:16
|
|
Advertisement
|
|
|
Member
|
23. January 2008 @ 12:20 |
Link to this message
|
Make sure your trying in a PAL 360,
and its probably your media
-Josh
|
