Ok, 1st off- I know this topic has been covered time and time again, BUT I've tried all suggestions and still can not FTP into my xbox.
I've got the Xecuter2 chip with Evox dash.
I have a wireless card connecting me to my home network/internet and an Ethernet card which I assigned a static IP.
I'm using a crossover cable to connect my machine and xbox, and my xbox default gateway matches my Ethernet NIC's IP.
Just so that you all more easily understand my log, 192.168.1.109 is the xbox and 192.168.1.108 is my pc.
After running FlashFXP with quicklaunch I get this responce:
WinSock 2.0 -- OpenSSL 0.9.8b 04 May 2006
[R] Connecting to 192.168.1.109 -> IP=192.168.1.109 PORT=21
[R] Connected to 192.168.1.109
[R] 220 Please enter your login name now.
[R] USER xbox
[R] 331 Password required for xbox.
[R] PASS (hidden)
[R] 230 User xbox logged in , proceed.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 502 feat is not implemented.
[R] REST 100
[R] 502 rest is not implemented.
[R] This site may not allow file resuming
[R] PWD
[R] 257 "/" is current directory
[R] TYPE A
[R] 200 Type set to ASCII.
[R] PASV
[R] 502 pasv is not implemented.
[R] Listening on PORT: 1422, Waiting for connection.
[R] PORT 192,168,1,108,5,142
[R] 425 Can't open data connection to 192.168.1.108:36357
[R] List Error
[R] PASV
[R] 502 pasv is not implemented.
[R] Listening on PORT: 1423, Waiting for connection.
[R] PORT 192,168,1,108,5,143
[R] 425 Can't open data connection to 192.168.1.108:36613
[R] List Error
[R] PASV mode failed, trying PORT mode.
[R] Listening on PORT: 1424, Waiting for connection.
[R] PORT 192,168,1,108,5,144
[R] 425 Can't open data connection to 192.168.1.108:36869
[R] List Error
I'm connected to a wireless network with the NIC I'm not using for my xbox connection.
Do I need to try setting up another network just for this?
If so, how do I do it and have it only for the NIC I want it for?
How do I physically set it up on my xbox's end?
I know the connection works because I get a cable disconnect when I flip my xbox off, and I can ping it so..
Thanks for the help.
I ended up having WMI issues which are still a problem, but I couldn't access my Windows firewall through the advanced tab on my NIC or command prompt.
I ended up going start>run>services.msc and killing my Windows Firewall/ICS service all together.
At least I was able to finally FTP and install XBMC again.
