|
|
|
Back up Tristan & Isolde
|
|
|
Spartan69
Newbie
|
12. September 2006 @ 18:09 |
Link to this message
|
Has anyone had any problems backing up Tristan & Isolde? I ran it through any DVD and DVD Shrink alright but when I used Nero to burn it it copied about 1/2 and then gave a wierd read error message. I don't remember what the error was but I tried coping twice and it ruined two discs. Anyone have any suggestions????
|
|
Advertisement
|
 |
|
|
Moderator
|
12. September 2006 @ 19:03 |
Link to this message
|
Hi Spartan69
Sounds like you ripped ok but the problem is in the burning.
Post the last Nero log to help sort this out. Just be sure to edit out your serial # - usually begin w/ 1A, 1C or 5C.
You can find them here:
Nero 6: program files>ahead>nero>nerohistory
Nero 7: program files>nero>nero 7>core>nerohistory
|
|
Spartan69
Newbie
|
12. September 2006 @ 19:37 |
Link to this message
|
Here is my log hx. Hope you can make some sense of it. It looks like Greek to me!!!!!!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 122MB (125072kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
9:09:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
9:09:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
9:09:48 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:09:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
9:09:48 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:09:48 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:09:48 PM #7 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running
9:09:48 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:09:48 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:09:48 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
9:09:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2189855 (486:38.05, 4277MB)
9:09:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
9:09:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
9:09:49 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:09:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2189856 (2189856) = #2189856/486:38.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2189856 blocks [HP DVD Writer 740b]
--------------------------------------------------------------
9:09:49 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4484825088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2189856 | lead-out | 1 | 0x41 | 0x00
9:09:49 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:09:49 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:09:49 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
9:09:49 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
9:09:49 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
9:09:49 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
9:09:49 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:09:49 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
9:09:49 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
9:09:49 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:15:15 PM #27 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 740b > start writing Lead-Out at LBA 2189856 (216A20h), lenght 0 blocks
9:15:15 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:15:16 PM #29 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2189855
9:15:38 PM #30 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 4d
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 329MB (337728kB)
Memory in use : 35
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
NeroAPI
10:37:14 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
10:37:14 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
10:37:14 PM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
10:37:14 PM #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.
10:37:14 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:37:14 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 91MB (93392kB)
Memory in use : 82
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
10:38:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:38:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:38:42 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:38:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:38:42 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:38:42 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:38:42 PM #7 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running
10:38:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:38:42 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:38:42 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:38:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
10:38:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:38:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
10:38:42 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:38:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [HP DVD Writer 740b]
--------------------------------------------------------------
10:38:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
10:38:42 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:38:42 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:38:43 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
10:38:43 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
10:38:43 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
10:38:43 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
10:38:43 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:38:43 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
10:38:43 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
10:38:43 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:41:39 PM #27 SPTI -1119 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x03
CDB Data: 0x2A 00 00 0D 4E 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09 03
Buffer x06e70000: Len x10000
0x00 00 01 BA 45 C1 EE 3C 3D AD 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 05 56 A7 CD BA 22 AB 5F CD
0x2C F6 96 A6 F8 C4 FC 6D 14 5C 6E D1 A1 AC E9 68
10:41:39 PM #28 CDR -1119 File Writer.cpp, Line 311
Track following error
D: HP DVD Writer 740b
10:41:39 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:41:40 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:41:40 PM #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 871935
10:41:40 PM #32 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 346MB (354668kB)
Memory in use : 32
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
10:42:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:42:59 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:42:59 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:42:59 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:42:59 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:42:59 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:42:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:42:59 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:42:59 PM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:43:29 PM #10 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
10:43:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:43:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b
Medium not present
10:43:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 346MB (354688kB)
Memory in use : 32
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
10:44:28 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:44:28 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:44:28 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:44:28 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:44:28 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:44:28 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:44:28 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:44:28 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:44:28 PM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:44:45 PM #10 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
10:44:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:44:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b
Medium not present
10:44:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 346MB (354580kB)
Memory in use : 32
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
10:47:05 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:47:05 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:47:05 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:47:05 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:47:05 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:47:05 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:47:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:47:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:47:05 PM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:47:13 PM #10 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
10:47:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:47:13 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b
Medium not present
10:47:13 PM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 63MB (64844kB)
Memory in use : 87
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
10:55:03 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:55:04 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:55:04 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:55:04 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:55:04 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:55:04 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:55:04 PM #7 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running
10:55:04 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:55:04 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:55:04 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:55:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
10:55:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:55:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
10:55:04 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:55:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [HP DVD Writer 740b]
--------------------------------------------------------------
10:55:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
10:55:04 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:55:04 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:55:04 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
10:55:04 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
10:55:04 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
10:55:04 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
10:55:04 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:55:05 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
10:55:05 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
10:55:05 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:57:08 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x06e40000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:57:08 PM #28 CDR -1135 File Writer.cpp, Line 311
Write error
D: HP DVD Writer 740b
10:57:09 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:57:09 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:57:10 PM #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1
10:57:10 PM #32 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 302MB (309524kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
10:59:22 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:59:22 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:59:22 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:59:22 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:59:22 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:59:22 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:59:22 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:59:22 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:59:22 PM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:59:59 PM #10 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
10:59:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:59:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b
Medium not present
10:59:59 PM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 87MB (89744kB)
Memory in use : 82
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.8.2006
UDF/ISO compilation
11:01:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
11:01:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
11:01:17 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:01:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
11:01:17 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
11:01:17 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
11:01:17 PM #7 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running
11:01:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:01:17 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:01:17 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
11:01:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
11:01:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:01:17 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:01:17 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:01:17 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [HP DVD Writer 740b]
--------------------------------------------------------------
11:01:17 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
11:01:17 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:01:17 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:01:17 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
11:01:17 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
11:01:17 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
11:01:17 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
11:01:17 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:01:17 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
11:01:17 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
11:01:17 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:06:45 PM #27 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 740b > start writing Lead-Out at LBA 2202160 (219A30h), lenght 0 blocks
11:06:45 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:06:45 PM #29 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2202159
11:07:05 PM #30 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 4d
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 241MB (247728kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.9.2006
NeroAPI
8:45:54 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
8:45:54 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
8:45:54 PM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
8:45:54 PM #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.
8:45:54 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:45:54 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 117MB (120148kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.9.2006
UDF/ISO compilation
8:48:23 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
8:48:23 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
8:48:23 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:48:23 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
8:48:23 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
8:48:23 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
8:48:23 PM #7 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running
8:48:23 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:48:23 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:48:23 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
8:48:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
8:48:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
8:48:24 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
8:48:24 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:48:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [HP DVD Writer 740b]
--------------------------------------------------------------
8:48:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
8:48:24 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:48:24 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:48:24 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
8:48:24 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
8:48:24 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
8:48:24 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
8:48:24 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:48:24 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
8:48:24 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
8:48:24 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:53:21 PM #27 SPTI -1093 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 15 43 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02
Buffer x06e60000: Len x10000
0x00 00 01 BA 44 55 E6 1B A4 E3 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 E4 CE 73 29 79 A1 AD CB 00
0xAC C9 99 70 EC 6F BB 7F 88 C0 82 03 80 0C 40 1A
8:53:21 PM #28 CDR -1093 File Writer.cpp, Line 311
No seek complete
D: HP DVD Writer 740b
8:53:21 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:53:22 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:53:23 PM #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1393471
8:53:23 PM #32 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 4d
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 237MB (243180kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.9.2006
NeroAPI
10:03:04 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
10:03:04 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
10:03:04 PM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
10:03:04 PM #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.
10:03:04 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:03:04 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
WINXP
1A20-8218-0270-2363-4267-8601*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON LTR-48246S >Version: STS1 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-22DYA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b D: CDRom0
LITE-ON LTR-48246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 109MB (112616kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.9.2006
UDF/ISO compilation
10:04:09 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:04:09 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:04:09 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:04:09 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:04:09 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:04:09 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:04:09 PM #7 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running
10:04:09 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:04:09 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:04:09 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:04:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2202159 (489:22.09, 4301MB)
10:04:09 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:04:09 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
10:04:09 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:04:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [HP DVD Writer 740b]
--------------------------------------------------------------
10:04:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00
10:04:09 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:04:09 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:04:09 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
10:04:09 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
10:04:09 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
10:04:09 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
10:04:09 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:04:09 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
10:04:09 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
10:04:09 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:09:02 PM #27 SPTI -1093 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 11 23 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02
Buffer x06d70000: Len x10000
0x00 00 01 BA 44 ED CE C6 45 CB 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 0C C8 48 78 0D D1 9B A4 74
0x80 D0 0E A4 96 41 89 83 49 6C 2B E2 2D 14 23 33
10:09:02 PM #28 CDR -1093 File Writer.cpp, Line 311
No seek complete
D: HP DVD Writer 740b
10:09:02 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:09:03 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:09:03 PM #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1123071
10:09:03 PM #32 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 12/2/2003 1:34:11 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Spartan69
Newbie
|
12. September 2006 @ 19:42 |
Link to this message
|
|
No seek complete was the error I got. It is on the very last one.
|
|
Spartan69
Newbie
|
12. September 2006 @ 19:45 |
Link to this message
|
|
I guess i didn't follow directions very well. Sorry I posted all the logs. Sorry for all the unnecessary junk alonf w/ serial #.
|
|
Advertisement
|
|
|
Moderator
|
12. September 2006 @ 20:05 |
Link to this message
|
No biggie on the logs - you can edit your post, leave the last 2 and edit out the serial # - begins w/ 1A. Don't need someone else using it!
Ok here's some suggestions.
From the 2nd to last log:
Error:\nCannot connect TRF.
Take Nero to version 6.6.0.18 - the last version of 6 to autoburn w/ Shrink. Write down your serial #, uninstall Nero, run the clean tool then install from these links:
http://ww2.nero.com/nero6/enu/General_CleanTool.html
Package 1
http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2 (recode & shrink)
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
Now you'll be able to autoburn w/ Nero & Shrink - no more TRF error.
Quote:
Recorder: <HP DVD Writer 740b> Version: DC24
Update your firmware to HI24. This update has a few fixes for your drive - media compatibility included.
http://h10025.www1.hp.com/ewfrf/wc/softw...item=pv-42566-1
Quote:
Physical memory : 511MB
Free physical memory: 109MB
Memory in use : 78
Quite a bit of memory in use. Glancing thru your logs - some had a good amt of memory free - 1 or 2 more had more in use than this last log. So no multitasking and closes any unnecessary programs - keep as much free as possible.
Quote:
Disc Manufacturer: MCC 03 - RG20
Great manufacturer MCC - using Verbatims?
Quote:
Burn process failed at 16x
For now let's take this down to 8x.
Quote:
File 'Drivers\CDRALW2K.SYS':
Roxio & Nero don't always play well together so uninsall Roxio and run their clean tool.
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Let's give that a go.
Keep us posted!
|
|
