|
|
|
Errors while trying to burn .avi's to dual layer dvd's using nero and decrypter
|
|
Newbie
|
30. October 2006 @ 05:34 |
Link to this message
|
ok, i have been coming to afterdawn and reading alot of the posts in the forums to try to learn how to use my dual layer burner for large .avi movies i have stored on my hard drive. i followed all the directions for various ways of doing this from using avi2dvd to make an .iso to either decrypter or Nero burning rom 6.6.0.8 to try and burn the iso. what i come to using both is an error early into the burn process. following is a copy of the log from Nero >
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0K - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0K - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-22CBA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 257MB (264124kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.10.2006
===== Disc-Copy over image - 1st step : Copy to image ...
3:01:20 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
3:01:20 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
3:01:20 PM #3 Phase 48 File dlgbrnst.cpp, Line 1832
Analyzing disc
3:01:21 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1907
The CD is copyrighted
3:01:24 PM #5 Text 0 File CDCopy.cpp, Line 2123
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 346829 346828 ( 77:06.28)
3:01:24 PM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 346829 = 346829, data (TRM_DATA_MODE1, block size 2048)
3:01:24 PM #7 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
3:01:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 346828 ( 77:06.28)
3:01:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
3:01:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
3:01:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:01:24 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 346829 (346829) = #346829/77:4.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 346829 blocks [Image Recorder]
--------------------------------------------------------------
3:01:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 710612992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
346829 | lead-out | 1 | 0x41 | 0x00
3:01:24 PM #14 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
3:01:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:03:40 PM #16 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 346829 (54ACDh), lenght 0 blocks
3:03:40 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:03:41 PM #18 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
3:03:52 PM #1 Text 0 File Burncd.cpp, Line 2868
LITE-ON DVDRW SOHW-1633S
Buffer underrun protection activated
3:03:53 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
3:03:53 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
3:03:53 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 710612992
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=77:04.29 ( 346829) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\Shannon Lee\My Documents\TempImage.nrg>
3:03:53 PM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
3:07:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 346828 ( 77:06.28)
3:07:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
3:07:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: LITE-ON DVDRW SOHW-1633S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
3:07:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
3:07:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 346829 (346829) = #346829/77:4.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 346829 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
3:07:29 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 849404592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
346829 | lead-out | 1 | 0x41 | 0x00
3:07:29 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)
3:07:29 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:07:29 PM #14 Text 0 File Mmc.cpp, Line 16480
StartDAO : CD-Text - Off
3:07:29 PM #15 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
3:10:35 PM #16 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 346829 (54ACDh), lenght 6750 blocks
3:10:37 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:11:07 PM #18 SCSI -1169 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
3:12:09 PM #19 SCSI -1169 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
3:12:09 PM #20 Text 0 File Mmc.cpp, Line 16911
EndDAO-Error: Eject to get the drive in a usable state
3:12:39 PM #21 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 1B 00 00 00 02 00 00 00 00 00 00 00
3:12:39 PM #22 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
3:13:09 PM #23 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:13:09 PM #24 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00129A68
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x10 0xC7 0x0A 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:13:39 PM #25 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:13:39 PM #26 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012999C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:14:09 PM #27 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:14:09 PM #28 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012999C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:14:39 PM #29 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:14:39 PM #30 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012999C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:15:09 PM #31 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:15:09 PM #32 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012999C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:15:09 PM #33 CDR -1169 File ThreadedTransferInterface.cpp, Line 1867
Logical unit not ready, operation in progress
3:15:09 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
Could not perform end of Disc-at-once
3:20:09 PM #35 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 300000ms
CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00
3:20:09 PM #36 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
3:20:39 PM #37 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:20:39 PM #38 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00129338
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x10 0xC7 0x0A 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:21:09 PM #39 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:21:09 PM #40 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012926C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:21:39 PM #41 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:21:39 PM #42 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012926C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:22:09 PM #43 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:22:09 PM #44 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012926C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:22:39 PM #45 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:22:39 PM #46 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012926C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:22:39 PM #47 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
LITE-ON DVDRW SOHW-1633S\H1 T0
3:22:39 PM #48 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:23:09 PM #49 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:23:09 PM #50 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x001294E8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:23:39 PM #51 CDR -1175 File Cdrdrv.cpp, Line 1239
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00
3:23:39 PM #52 SCSI -1169 File Cdrdrv.cpp, Line 1240
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x001294E8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
3:23:39 PM #53 CDR -1169 File WriterStatus.cpp, Line 172
Logical unit not ready, operation in progress
3:23:39 PM #54 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
3:24:10 PM #55 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 48x (7,200 KB/s)
3:24:40 PM #56 SCSI -1169 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/1/2006 5:11:06 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
sry for that long thing.
also i know what my firmware version is and all that, and went to lite-on to check for a new version of firmware, found what looked to be an update flash, but when i tried to run it it said that my drive was not located, that it wasn't the correct version, but as you can see in the log from Nero, it specifically lists my model and firmware version so thats the firmware flash i downloaded. so far i have wasted 4 HP DVD+R doublelayer disc's.. i have no troubles burning sl but the dl's are proving troublesome and my writer is supposed to do dl's. HELP PLEASE!
thanx
Shannon
This message has been edited since posting. Last time this message was edited on 30. October 2006 @ 10:23
|
|
Advertisement
|
 |
|
|
Senior Member
|
30. October 2006 @ 09:12 |
Link to this message
|
hello,
First u NEED to remove ur Serial # at the top of the post it starts with 1A, hit the edit button which is the Pen/pencil and paper at the top right.
U can try this website for ur firmware update, u r about 3 updates behind.
http://forum.rpc1.org/dl_firmware.php?download_id=1934
Second, i am confused about the burn log, i believe that it is a burn log for burning a CD not a DVD
Quote:
so far i have wasted 4 HP DVD+R doublelayer disc's
The firmware might help with this media u are currently using, HOWEVER these are not good quality disks, the best DL media is Verbatims without a doubt.
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson This message has been edited since posting. Last time this message was edited on 30. October 2006 @ 09:14
|
Newbie
|
30. October 2006 @ 10:25 |
Link to this message
|
|
you mean my firmware is out of date? as far as the dics go, its just cuz its the only brand they had at my local wal-mart, do you know of any stores where the verbatim disks are sold? i am in the southwest area of missouri
|
Newbie
|
30. October 2006 @ 10:33 |
Link to this message
|
|
hey also, sry bowler, buti se a few firmware's on here, which one is the latest? the last one in the ones listed there? thanks bowler, sry if i'm being a pain.
|
|
Advertisement
|
|
|
Newbie
|
21. February 2007 @ 04:34 |
Link to this message
|
ok , some time back i started this thread and as stupid as it sounds couldn't at the time figure out how to update my burners firmware.
last night i figured it out and have now updated my firmware and i have also purchased a few verbatim DVD+R DL discs to try and still burn .avi movies to them. When i started up Nero last night and have also updated to Nero 7 3.5.2.1 . Anyways, i tried to burn to avi's last night (they put the disc right up to 8gb.'s) and then clicked to burn. well it acted like it was going to do it so i went to bed as it was pretty late. When i got up this morning, it was still exactly where i left it, preparing the disc. can someone help me know what i did wrong, cuz bowlers instructions from b4 i thought i followed them pretty well. please help!
|
|
