|
|
|
Can't burn DVD+ OR -RW
|
|
|
50_cent
Suspended due to non-functional email address
|
3. December 2006 @ 17:58 |
Link to this message
|
I have a pioneer dvr-106 and i cannot burn RW. DVD-R and DVD+R burn fine, but when it comes to the RW, it can't format the disc. It says it's a Power Calibration Error but i think there might be more to it.
The Disc i used is a brand new TDK DVD+RW, so the brand is good. I updated to the latest firmware, latest Nero, and still having errors. When i put in the DVD-RW it won't even attempt to burn. Here is the latest error report. Maybe a problem with the laser, but i dont know cause non SVDRW burn fine. CDRW burn fine also.
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00DKA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
LITE-ON COMBO LTC-48161H E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 252MB (258412kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.12.2006
Burn DVD Image
2:03:36 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:03:37 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2311290880
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Liam\My Documents\Backups\Vodaphone.nrg>
2:03:37 PM #3 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
2:03:37 PM #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1128559 (250:47.34, 2204MB)
2:03:37 PM #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
2:03:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
2:03:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:03:37 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1128560 (1128560) = #1128560/250:47.35
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1128560 blocks [D: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------
2:03:37 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2311290880, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1128560 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1128560 | 0 | 0x00
1128560 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:03:37 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:03:37 PM #11 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3,324 KB/s)
2:03:37 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:03:37 PM #13 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
2:03:37 PM #14 Phase 98 File dlgbrnst.cpp, Line 1746
Start formatting disc before burning
2:03:46 PM #15 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03
2:03:46 PM #16 Phase 101 File dlgbrnst.cpp, Line 1746
Formatting disc failed
2:03:46 PM #17 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
2:03:46 PM #18 CDR -1106 File ThreadedTransferInterface.cpp, Line 1779
Power calibration error
D: PIONEER DVD-RW DVR-106D
2:03:46 PM #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779
Could not perform start of Disc-at-once
2:03:47 PM #20 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3,324 KB/s)
2:03:47 PM #21 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:03:50 PM #22 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
2:03:50 PM #23 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/27/2005 7:12:48 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
4. December 2006 @ 04:18 |
Link to this message
|
Quote:
2:03:46 PM #16 Phase 101 File dlgbrnst.cpp, Line 1746
Formatting disc failed
Quote:
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Quote:
2:03:46 PM #18 CDR -1106 File ThreadedTransferInterface.cpp, Line 1779
Power calibration error
D: PIONEER DVD-RW DVR-106D
Quote:
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
all this refers to the media used..... and your machine doesn't like the media! TDK (manufacturers ID code of PHILIPS) is crappy media! If you're going to use +RW disks then get Sony! they are much better quaility!
and more about your burner:
http://www.videohelp.com/dvdwriters.php?...list=2#comments
it's a little on the old side so if you can buy the 4x media, do so... but the +RW media now is up to 4x and your writer can only do 2.4x on those rewritables. maybe it's time to upgrade your burner.
|
Senior Member
|
4. December 2006 @ 12:58 |
Link to this message
|
|
I stop buying RW disc just bese they never did what they said they would do They did one thing very good -DIE-
RBROCK
|
Senior Member
|
4. December 2006 @ 12:59 |
Link to this message
|
|
sorry I can't spell siht
RBROCK
|
AfterDawn Addict
|
4. December 2006 @ 15:46 |
Link to this message
|
|
I use RW disks all the time! works great..... use an RW disk to back up my Quicken files, and when I am unsure of whether or not I want to keep a DVD backup I use an RW disk first and then see if I want to just copy it to a +/-R if it's worthy or not! RWs are very useful! I have about 15 DVD+RWs and the same for CD-RWs. they come in handy.
|
Senior Member
|
4. December 2006 @ 16:08 |
Link to this message
|
|
I lost a bunch of pictures on RWs I'm still mad about that. at 30 cents a disc I'll stick to a fresh disc
RBROCK
|
AfterDawn Addict
|
4. December 2006 @ 16:23 |
Link to this message
|
I have a neat little program that can recover deleted or reformated disk files or data! I got this little program when I bought the new SanDisk Extreme IV 2.0GB compact flash for my camera. it's called RescuePro.....
http://www.sandisk.com/Products/Item(219..._Deluxe_40.aspx
this would recover files on those RW disks.
This message has been edited since posting. Last time this message was edited on 4. December 2006 @ 16:30
|
Senior Member
|
4. December 2006 @ 16:38 |
Link to this message
|
|
Hmmm.. I'll have to check that out, thanks for the info!
RBROCK
|
|
Advertisement
|
|
|
AfterDawn Addict
|
4. December 2006 @ 16:43 |
Link to this message
|
|
Thank you for your interest in RescuePRO Deluxe, the worlds best performing undelete utility for recovering files off of of all types of removable digital media.
To begin your PC demo download click here <http://www.lc-tech.com/productdemo/RescuePRO-Deluxe-DEMO-setup.zip> .
I had to give them my name and email address ...... I don't know if this link will work for you but it's worth a try!
|
|
