|
dbox2 please help, no channels found
|
|
|
cozzie121
Newbie
|
6. January 2007 @ 14:23 |
Link to this message
|
|
hi,
i got a box and have successfully flashed commando 6 onto it. i have tried commando 3, neutrino and sportster images, every time i have done a search no channels come up.
the box finds 303 transponders then goes through 1/303, 2/303, 3/303. but always comes up "no channels found" is there any settings i can change that may help. i am using bruteforce uk?
any help is much appreciated
|
|
Advertisement
|
|
|
|
Senior Member
|
7. January 2007 @ 00:27 |
Link to this message
|
|
you may want to check your signal..
if you go to any channel
press the red button on the remote then the blue button to get the stream information, you need to check the three values, and please post the values here.
|
|
cozzie121
Newbie
|
7. January 2007 @ 02:27 |
Link to this message
|
|
hi,
the red value keeps increasing - started at 3800 and still going?
the blue - snr - is 40008
the green - sig - is 62448
|
Senior Member
|
7. January 2007 @ 03:23 |
Link to this message
|
|
your BER is very hight, it should be as low as possible - on mine my BER is between 30-40
the other two values should be as high as possible
seems you have a signal issue from your cable feed.
you could try buying one of them digital signal booster (about £10 from Argos)
|
|
cozzie121
Newbie
|
7. January 2007 @ 04:20 |
Link to this message
|
|
ok,
i'm using commander 6, with ucode oo1a, the provider was on bruteforce but has resorted back to kabel deutschland and i have no idea how to get that back and cant change it.
i've been reading that i need to put some kind of cables.xml file onto it, but for that i need a dbox manager software, which i cant find the d/l for anywhere. i have the files but nothing specific for the tayside area??
|
|
cozzie121
Newbie
|
7. January 2007 @ 04:27 |
Link to this message
|
|
ok,
i'm using commander 6, with ucode oo1a, the provider was on bruteforce but has resorted back to kabel deutschland and i have no idea how to get that back and cant change it.
i've been reading that i need to put some kind of cables.xml file onto it, but for that i need a dbox manager software, which i cant find the d/l for anywhere. i have the files but nothing specific for the tayside area??
|
Senior Member
|
7. January 2007 @ 06:19 |
Link to this message
|
|
if Commando 6 you first need to set your location (area) then do a full scan using Bruteforce UK with fast scan off
however if you are having signal issues, it wont pick up any channels
|
|
cozzie121
Newbie
|
7. January 2007 @ 09:59 |
Link to this message
|
|
hi,
as i said i dont have the option of bruteforce anymore, the box has resorted to kable deutschland as the provider and cant change it?
|
|
benifa
Member
|
7. January 2007 @ 10:13 |
Link to this message
|
I had the excact same problem as you when I, just for fun, flashed the latest German Yada image (both Neutrino and Enigma versions).. Reading your post is like deja vu..
Scanned for channels using bruteforce, fast scan off etc etc, still found no channels..
In the end I just flashed another image, scanned again and found all (even PPV)..
I can't explain why it seems some images just work whereas others don't, I want to research more to find out why though..
For your case, I think if I were you I'd just reflash another image. If your Dbox2 has 2 chips, try flashing this Sportster image, which is what I use and has never let me down in anyway..
http://www.ifawilson.com/downloads/Dbox/...+%20uk05_2x.exe
|
|
ginja23
Newbie
|
7. January 2007 @ 11:35 |
Link to this message
|
|
FYI cozzie121
for telewest
my cable signal values on my sagem dbox2(thats working ok)
BER - 0
SNR - 63000
SIG - 0
my cable signal values on my nokia dbox2(that doesn't detect any channels)
BER - 26214
SNR - 50000
SIG - 36237
i'm sending nokia box back for tuner to be replaced.
|
|
cozzie121
Newbie
|
12. January 2007 @ 03:01 |
Link to this message
|
|
thanks very much, i will try reflashing tonight with your image benifa, fingers crossed i can find something.
i'm also beginning to think my signal will have an effect on it, i remember when smellywest installed they took a split off somebody elses signal as they couldbnt be arsed finding the main box.
|
Newbie
|
22. January 2007 @ 13:53 |
Link to this message
|
|
hey,is there any way of getting more options on who to scan with,without having reflash an image,because i cant do it.everytime i try to flash,it says boot net faled.im using flash assistance but its not helping.i tried it the other,longer harder way,but to no avail.can anyone please help me???thanx
|
|
benifa
Member
|
22. January 2007 @ 23:40 |
Link to this message
|
If you have an image flashed already (in other words, you don't have Kein System), you can just FTP a new image to the /tmp directory. The username for the dbox is root and the password is usually either dbox or dbox2. If you want to try keeping your existing image, you can get the UK cable options by replacing the German cables.xml with the UK version. If you need it, click here: http://www.ifawilson.com/downloads/Dbox/cables.xml
You may also need the scan.conf, which is here:
http://www.ifawilson.com/downloads/Dbox/scan.conf
If you do use the scan.conf, it's important that after you transfer to the Dbox2 you reboot it by unplugging it from the mains - not by powering it down by the remote control. The latter would result in the scan.conf you just transfered being replaced by the original.
|
Newbie
|
23. January 2007 @ 10:05 |
Link to this message
|
i have those cable.xml on cd already,but i dont know what to do with them,i know it sounds stupid,but i really havent a clue. http://www.ifawilson.com/downloads/Dbox/scan.conf seems not to work either,the page is just frozen,but i think it mite be my comp.i cant even download the FTP .after turning off all firewalls and anti viruses,it still says my security settings will not permit download.id say i should just give up this.
|
|
johnno4
Junior Member
|
27. January 2007 @ 03:46 |
Link to this message
|
|
to benifa
how do you know if you dbox2 has 1 or 2 chips?
sry if this sounds a silly question but really new to this
i to have those high readings and cant get any channels
john
|
|
benifa
Member
|
27. January 2007 @ 04:10 |
Link to this message
|
Have a look through the vents in the top of the Dbox2, see how many of the larger chips you can see. They're quite close together, and you'll see either 1 or 2..
Another way to be absolutely sure, is to make a backup of your existing image using the remote control, transfer this via FTP to your PC, then open IFA and select this image to flash back to your Dbox2. You don't actually have to flash it back, but just by selecting the image it will tell you whether it's 1x or 2x. At this point you can just cancel the flashing..
|
|
johnno4
Junior Member
|
27. January 2007 @ 04:15 |
Link to this message
|
thank you benifa
i have two chips so would you be so kind as to talk me though the proceedure if you have the time that is
my email addy is john_jcraddock@hotmail.com if you use Skype or msn voice chat etc we can exchange on there
if you rather not i dont mind
many thanks for your input
regards
john
|
|
Fekker
Senior Member
|
27. January 2007 @ 04:24 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 27. January 2007 @ 04:25
|
|
mick2909
Newbie
|
2. February 2007 @ 04:23 |
Link to this message
|
|
Hi Benifa
The link to the file: scan.conf (http://www.ifawilson.com/downloads/Dbox/scan.conf) is dead can you relist it.
Thanks
This message has been edited since posting. Last time this message was edited on 2. February 2007 @ 04:24
|
|
tamrazza
Newbie
|
3. February 2007 @ 02:43 |
Link to this message
|
|
hello i have had the dbox since before xmas and had no problems untill late last night,
all the channels where blank? i scanned for channels but found none i then unplugged it over night then in the morning i re-scanned it goes thro and picks up the channels then tells me it finished scanning but then tells me that no channels where found, and now it tells me that the transponderscan has failed?
any help is very much appreciated.
it has commando 6 inastalled
|
|
mouse31
Newbie
|
4. February 2007 @ 05:23 |
Link to this message
|
|
I have a Sagem dbox2 with Neutrino image. Until recently I was receiving all channels but I have now lost my film,sport & adult channels.
Ihave carried out a service scan but this has not retrieved the channels. I still get the display with channel name & EPG but no sound or picture. A friend of mine had a similar problem with his Eurobox but he was directed to a site where he downloaded. Any body out there with any solutions. My apologies if this is posted on the wrong site but this is the first time i as a novice have ever tried to post a message
|
|
markoboy
Newbie
|
8. February 2007 @ 01:05 |
Link to this message
|
Originally posted by benifa:
I had the excact same problem as you when I, just for fun, flashed the latest German Yada image (both Neutrino and Enigma versions).. Reading your post is like deja vu..
Scanned for channels using bruteforce, fast scan off etc etc, still found no channels..
In the end I just flashed another image, scanned again and found all (even PPV)..
I can't explain why it seems some images just work whereas others don't, I want to research more to find out why though..
For your case, I think if I were you I'd just reflash another image. If your Dbox2 has 2 chips, try flashing this Sportster image, which is what I use and has never let me down in anyway..
http://www.ifawilson.com/downloads/Dbox/..._2x.exe[/quote]
Markoboy
|
|
markoboy
Newbie
|
8. February 2007 @ 01:09 |
Link to this message
|
|
Hi Benifa - downloaded the sportster file onto my pc via your link - sorry to be a retard but how do I now reflash the DBox? - thanks.
Markoboy
|
|
benifa
Member
|
8. February 2007 @ 01:13 |
Link to this message
|
First of all extract the image from the .exe (so that you have the file ending .img)..
Next, you can either FTP the image to the box, or use IFA. The latter may be easier as there are less settings to configure..
Zappp64 has a good guide as well as the IFA program for d/l..
http://netwave.redirectme.net/dbox/IFA/index.htm
|
|
Advertisement
|
|
|
|
risheet03
Junior Member
|
8. February 2007 @ 04:56 |
Link to this message
|
|
OK, I'm very new to dboxes and heres my problem, I recently purchased a dbox2 from ebay and it came with sporster image and all the channel lists preloaded, however they weren't working when i first plugged it in, so i did a re-scan and cut the number of channels in half, for some reason i'm getting about 20 bbc one's, 20 itv's and about 3 non terrestrial channels i.e. sky sports xtra. Now does anyone know how i can restore it to the way it arrived(with pre installed channels such as sky sports etc.) without flashing it, as i have no null modem port on my laptop to be able to flash it!!
thanks
|
